<?xml version="1.0" encoding="UTF-8"?>
<metadata xmlns="http://linux.duke.edu/metadata/common" xmlns:rpm="http://linux.duke.edu/metadata/rpm" packages="127">
<package type="rpm">
  <name>afbackup</name>
  <arch>i586</arch>
  <version epoch="0" ver="3.5.3" rel="10.4"/>
  <checksum type="sha" pkgid="YES">c061bfa63739cd3a9bf7df07a56cfae4e66f8581</checksum>
  <summary>Common files for AF's network backup system</summary>
  <description>afbackup is a client-server backup system offering several workstations to
perform a backup to a special central backup server.  Backing up only one
computer is easily possible, too.  Any streaming device can be used
for writing the data to, usually this will be a tape device, but hard
disks can be used, too.  Writing backups is normally done sequentially; data
is appended after the end of the previous backup regardless of restore
operations issued on other tapes in the meantime.

Features:
- Client is authenticated before being allowed to perform backup
- Access restriction for the streamer device -&gt; security
- Client-side per-file compression -&gt; reliability
- Data stream is written to tape in chunks -&gt; fast finding of files
- Tape position logging for each file
- Tape capacity is fully used
- Full/incremental backups
- Raw partitions can be backed up
- Client and server use buffering for maximal throughput</description>
  <packager>Gerd v. Egidy &lt;egidy@deam.de&gt;</packager>
  <url>http://sourceforge.net/projects/afbackup/</url>
  <time file="1625560436" build="1625560431"/>
  <size package="250232" installed="1002406" archive="1005664"/>
  <location href="i586/afbackup-3.5.3-10.4.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Archiving</rpm:group>
    <rpm:buildhost>goat15</rpm:buildhost>
    <rpm:sourcerpm>afbackup-3.5.3-10.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="6154"/>
    <rpm:provides>
      <rpm:entry name="afbackup" flags="EQ" epoch="0" ver="3.5.3" rel="10.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="grep" pre="1"/>
    </rpm:requires>
    <file type="dir">/etc/afbackup</file>
  </format>
</package>
<package type="rpm">
  <name>afbackup</name>
  <arch>src</arch>
  <version epoch="0" ver="3.5.3" rel="10.4"/>
  <checksum type="sha" pkgid="YES">9ff98a26155e826a4197b46d3ba71937478d4d7d</checksum>
  <summary>Common files for AF's network backup system</summary>
  <description>afbackup is a client-server backup system offering several workstations to
perform a backup to a special central backup server.  Backing up only one
computer is easily possible, too.  Any streaming device can be used
for writing the data to, usually this will be a tape device, but hard
disks can be used, too.  Writing backups is normally done sequentially; data
is appended after the end of the previous backup regardless of restore
operations issued on other tapes in the meantime.

Features:
- Client is authenticated before being allowed to perform backup
- Access restriction for the streamer device -&gt; security
- Client-side per-file compression -&gt; reliability
- Data stream is written to tape in chunks -&gt; fast finding of files
- Tape position logging for each file
- Tape capacity is fully used
- Full/incremental backups
- Raw partitions can be backed up
- Client and server use buffering for maximal throughput</description>
  <packager>Gerd v. Egidy &lt;egidy@deam.de&gt;</packager>
  <url>http://sourceforge.net/projects/afbackup/</url>
  <time file="1625560196" build="1625560189"/>
  <size package="1009600" installed="1016753" archive="1017384"/>
  <location href="src/afbackup-3.5.3-10.4.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Archiving</rpm:group>
    <rpm:buildhost>goat17</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="4385"/>
    <rpm:requires>
      <rpm:entry name="zlib-devel"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>afbackup</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="3.5.3" rel="10.4"/>
  <checksum type="sha" pkgid="YES">6bd3aa6ef3df8b31022c80fdc869d228cffc6237</checksum>
  <summary>Common files for AF's network backup system</summary>
  <description>afbackup is a client-server backup system offering several workstations to
perform a backup to a special central backup server.  Backing up only one
computer is easily possible, too.  Any streaming device can be used
for writing the data to, usually this will be a tape device, but hard
disks can be used, too.  Writing backups is normally done sequentially; data
is appended after the end of the previous backup regardless of restore
operations issued on other tapes in the meantime.

Features:
- Client is authenticated before being allowed to perform backup
- Access restriction for the streamer device -&gt; security
- Client-side per-file compression -&gt; reliability
- Data stream is written to tape in chunks -&gt; fast finding of files
- Tape position logging for each file
- Tape capacity is fully used
- Full/incremental backups
- Raw partitions can be backed up
- Client and server use buffering for maximal throughput</description>
  <packager>Gerd v. Egidy &lt;egidy@deam.de&gt;</packager>
  <url>http://sourceforge.net/projects/afbackup/</url>
  <time file="1625560196" build="1625560189"/>
  <size package="250187" installed="1002406" archive="1005664"/>
  <location href="x86_64/afbackup-3.5.3-10.4.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Archiving</rpm:group>
    <rpm:buildhost>goat17</rpm:buildhost>
    <rpm:sourcerpm>afbackup-3.5.3-10.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="6134"/>
    <rpm:provides>
      <rpm:entry name="afbackup" flags="EQ" epoch="0" ver="3.5.3" rel="10.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="grep" pre="1"/>
    </rpm:requires>
    <file type="dir">/etc/afbackup</file>
  </format>
</package>
<package type="rpm">
  <name>afbackup-client</name>
  <arch>i586</arch>
  <version epoch="0" ver="3.5.3" rel="10.4"/>
  <checksum type="sha" pkgid="YES">5216bd0c93dd492028246f817bf39602a341ccfb</checksum>
  <summary>Client side of AF's backup system</summary>
  <description>The afbackup client needs to be installed on all machines which have data
to back up.  It is started either via remote control or using a local cron
job, connects then to the server over the network and sends the data to be
backed up.</description>
  <packager>Gerd v. Egidy &lt;egidy@deam.de&gt;</packager>
  <url>http://sourceforge.net/projects/afbackup/</url>
  <time file="1625560436" build="1625560431"/>
  <size package="308861" installed="921623" archive="926048"/>
  <location href="i586/afbackup-client-3.5.3-10.4.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Archiving</rpm:group>
    <rpm:buildhost>goat15</rpm:buildhost>
    <rpm:sourcerpm>afbackup-3.5.3-10.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="6351"/>
    <rpm:provides>
      <rpm:entry name="afbackup-client" flags="EQ" epoch="0" ver="3.5.3" rel="10.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="afbackup"/>
      <rpm:entry name="/bin/csh"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libm.so.6(GLIBC_2.0)"/>
      <rpm:entry name="libz.so.1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3)"/>
    </rpm:requires>
    <file>/etc/afbackup/client.conf</file>
    <file>/usr/sbin/__packpats</file>
    <file>/usr/sbin/__piper</file>
    <file>/usr/sbin/__z</file>
    <file>/usr/sbin/afbackout</file>
    <file>/usr/sbin/afbackup</file>
    <file>/usr/sbin/afclient</file>
    <file>/usr/sbin/afclientconfig</file>
    <file>/usr/sbin/afrestore</file>
    <file>/usr/sbin/afverify</file>
    <file>/usr/sbin/autocptapes</file>
    <file>/usr/sbin/clientconfig</file>
    <file>/usr/sbin/copy_tape</file>
    <file>/usr/sbin/full_backup</file>
    <file>/usr/sbin/incr_backup</file>
    <file>/usr/sbin/update_indexes</file>
    <file>/usr/sbin/xafclientconfig</file>
    <file>/usr/sbin/xafrestore</file>
    <file>/usr/sbin/xclientconfig</file>
    <file>/usr/sbin/xrestore</file>
  </format>
</package>
<package type="rpm">
  <name>afbackup-client</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="3.5.3" rel="10.4"/>
  <checksum type="sha" pkgid="YES">50abf4ad70d3b69f3b954ee2eb0791d1d367c4a1</checksum>
  <summary>Client side of AF's backup system</summary>
  <description>The afbackup client needs to be installed on all machines which have data
to back up.  It is started either via remote control or using a local cron
job, connects then to the server over the network and sends the data to be
backed up.</description>
  <packager>Gerd v. Egidy &lt;egidy@deam.de&gt;</packager>
  <url>http://sourceforge.net/projects/afbackup/</url>
  <time file="1625560196" build="1625560189"/>
  <size package="341247" installed="1028993" archive="1033420"/>
  <location href="x86_64/afbackup-client-3.5.3-10.4.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Archiving</rpm:group>
    <rpm:buildhost>goat17</rpm:buildhost>
    <rpm:sourcerpm>afbackup-3.5.3-10.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="6331"/>
    <rpm:provides>
      <rpm:entry name="afbackup-client" flags="EQ" epoch="0" ver="3.5.3" rel="10.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="afbackup"/>
      <rpm:entry name="/bin/csh"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libz.so.1()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3)(64bit)"/>
    </rpm:requires>
    <file>/etc/afbackup/client.conf</file>
    <file>/usr/sbin/__packpats</file>
    <file>/usr/sbin/__piper</file>
    <file>/usr/sbin/__z</file>
    <file>/usr/sbin/afbackout</file>
    <file>/usr/sbin/afbackup</file>
    <file>/usr/sbin/afclient</file>
    <file>/usr/sbin/afclientconfig</file>
    <file>/usr/sbin/afrestore</file>
    <file>/usr/sbin/afverify</file>
    <file>/usr/sbin/autocptapes</file>
    <file>/usr/sbin/clientconfig</file>
    <file>/usr/sbin/copy_tape</file>
    <file>/usr/sbin/full_backup</file>
    <file>/usr/sbin/incr_backup</file>
    <file>/usr/sbin/update_indexes</file>
    <file>/usr/sbin/xafclientconfig</file>
    <file>/usr/sbin/xafrestore</file>
    <file>/usr/sbin/xclientconfig</file>
    <file>/usr/sbin/xrestore</file>
  </format>
</package>
<package type="rpm">
  <name>afbackup-server</name>
  <arch>i586</arch>
  <version epoch="0" ver="3.5.3" rel="10.4"/>
  <checksum type="sha" pkgid="YES">185a6e2d4e004022f8db9e4cc99eee0b7eda2b71</checksum>
  <summary>Server side of AF's backup system</summary>
  <description>The afbackup server runs on the machine which offers storage (tape or
sometimes hard drive) for backups on your network. Any machines running
backup clients contact the server in regular intervals and send data
to store on the backup medium.</description>
  <packager>Gerd v. Egidy &lt;egidy@deam.de&gt;</packager>
  <url>http://sourceforge.net/projects/afbackup/</url>
  <time file="1625560436" build="1625560431"/>
  <size package="274181" installed="842042" archive="847564"/>
  <location href="i586/afbackup-server-3.5.3-10.4.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Archiving</rpm:group>
    <rpm:buildhost>goat15</rpm:buildhost>
    <rpm:sourcerpm>afbackup-3.5.3-10.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="10795"/>
    <rpm:provides>
      <rpm:entry name="afbackup-server" flags="EQ" epoch="0" ver="3.5.3" rel="10.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="afbackup"/>
      <rpm:entry name="/usr/sbin/groupadd" pre="1"/>
      <rpm:entry name="/usr/sbin/useradd" pre="1"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/csh"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libm.so.6(GLIBC_2.0)"/>
      <rpm:entry name="libz.so.1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3)"/>
    </rpm:requires>
    <file>/etc/afbackup/changer.conf</file>
    <file type="dir">/etc/afbackup/rexec</file>
    <file>/etc/afbackup/rexec/afrestore</file>
    <file>/etc/afbackup/rexec/afverify</file>
    <file>/etc/afbackup/rexec/copy_tape</file>
    <file>/etc/afbackup/rexec/full_backup</file>
    <file>/etc/afbackup/rexec/incr_backup</file>
    <file>/etc/afbackup/rexec/update_indexes</file>
    <file>/etc/afbackup/server.conf</file>
    <file>/etc/init.d/afbackup</file>
    <file>/usr/sbin/__inc_link</file>
    <file>/usr/sbin/__mt</file>
    <file>/usr/sbin/__numset</file>
    <file>/usr/sbin/afmserver</file>
    <file>/usr/sbin/afserver</file>
    <file>/usr/sbin/afserverconfig</file>
    <file>/usr/sbin/cart_ctl</file>
    <file>/usr/sbin/cartagehandler</file>
    <file>/usr/sbin/cartis</file>
    <file>/usr/sbin/cartready</file>
    <file>/usr/sbin/changerready</file>
    <file>/usr/sbin/label_tape</file>
    <file>/usr/sbin/rcafbackup</file>
    <file>/usr/sbin/serverconfig</file>
    <file>/usr/sbin/xafserverconfig</file>
    <file>/usr/sbin/xafserverstatus</file>
    <file>/usr/sbin/xserverconfig</file>
    <file>/usr/sbin/xserverstatus</file>
  </format>
</package>
<package type="rpm">
  <name>afbackup-server</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="3.5.3" rel="10.4"/>
  <checksum type="sha" pkgid="YES">926879585a67c26e7a028d3c6453855ea8956eca</checksum>
  <summary>Server side of AF's backup system</summary>
  <description>The afbackup server runs on the machine which offers storage (tape or
sometimes hard drive) for backups on your network. Any machines running
backup clients contact the server in regular intervals and send data
to store on the backup medium.</description>
  <packager>Gerd v. Egidy &lt;egidy@deam.de&gt;</packager>
  <url>http://sourceforge.net/projects/afbackup/</url>
  <time file="1625560196" build="1625560189"/>
  <size package="303760" installed="959310" archive="964832"/>
  <location href="x86_64/afbackup-server-3.5.3-10.4.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Archiving</rpm:group>
    <rpm:buildhost>goat17</rpm:buildhost>
    <rpm:sourcerpm>afbackup-3.5.3-10.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="10779"/>
    <rpm:provides>
      <rpm:entry name="afbackup-server" flags="EQ" epoch="0" ver="3.5.3" rel="10.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="afbackup"/>
      <rpm:entry name="/usr/sbin/groupadd" pre="1"/>
      <rpm:entry name="/usr/sbin/useradd" pre="1"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/csh"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libz.so.1()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3)(64bit)"/>
    </rpm:requires>
    <file>/etc/afbackup/changer.conf</file>
    <file type="dir">/etc/afbackup/rexec</file>
    <file>/etc/afbackup/rexec/afrestore</file>
    <file>/etc/afbackup/rexec/afverify</file>
    <file>/etc/afbackup/rexec/copy_tape</file>
    <file>/etc/afbackup/rexec/full_backup</file>
    <file>/etc/afbackup/rexec/incr_backup</file>
    <file>/etc/afbackup/rexec/update_indexes</file>
    <file>/etc/afbackup/server.conf</file>
    <file>/etc/init.d/afbackup</file>
    <file>/usr/sbin/__inc_link</file>
    <file>/usr/sbin/__mt</file>
    <file>/usr/sbin/__numset</file>
    <file>/usr/sbin/afmserver</file>
    <file>/usr/sbin/afserver</file>
    <file>/usr/sbin/afserverconfig</file>
    <file>/usr/sbin/cart_ctl</file>
    <file>/usr/sbin/cartagehandler</file>
    <file>/usr/sbin/cartis</file>
    <file>/usr/sbin/cartready</file>
    <file>/usr/sbin/changerready</file>
    <file>/usr/sbin/label_tape</file>
    <file>/usr/sbin/rcafbackup</file>
    <file>/usr/sbin/serverconfig</file>
    <file>/usr/sbin/xafserverconfig</file>
    <file>/usr/sbin/xafserverstatus</file>
    <file>/usr/sbin/xserverconfig</file>
    <file>/usr/sbin/xserverstatus</file>
  </format>
</package>
<package type="rpm">
  <name>analog</name>
  <arch>i586</arch>
  <version epoch="0" ver="6.0" rel="12.2"/>
  <checksum type="sha" pkgid="YES">d4dca4259e85c90b937d20913f5ac08d3893316e</checksum>
  <summary>WWW server logfile analysis program</summary>
  <description>Analog is a popular WWW server logfile analysis program with lots of features.
You should edit the /etc/analog.cfg and customize it for your webserver, in
particular you'll probably want to configure the HOSTNAME and HOSTURL options.
Perl is required if you want to use the html forms interface (which is not
installed automatically by this package - see the documentation for instructions).</description>
  <packager></packager>
  <url>http://www.analog.cx/</url>
  <time file="1625560242" build="1625560236"/>
  <size package="1389946" installed="4002203" archive="4074124"/>
  <location href="i586/analog-6.0-12.2.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Utilities</rpm:group>
    <rpm:buildhost>lamb16</rpm:buildhost>
    <rpm:sourcerpm>analog-6.0-12.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="46276"/>
    <rpm:provides>
      <rpm:entry name="analog" flags="EQ" epoch="0" ver="6.0" rel="12.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/perl"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libm.so.6(GLIBC_2.0)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)"/>
    </rpm:requires>
    <file type="dir">/etc/analog</file>
    <file>/etc/analog/RefSpam.txt</file>
    <file>/etc/analog/RobotInclude.txt</file>
    <file>/etc/analog/SearchEngines.txt</file>
    <file>/etc/analog/TypeAlias.txt</file>
    <file>/etc/analog/analog.cfg</file>
    <file>/etc/apache2/conf.d/analog.conf</file>
    <file>/etc/cron.d/analog</file>
    <file>/usr/bin/analog</file>
    <file>/usr/bin/analog-monthly</file>
    <file>/usr/bin/rebuild_analog_stats</file>
    <file>/usr/bin/split-logfile2-bymonth</file>
  </format>
</package>
<package type="rpm">
  <name>analog</name>
  <arch>src</arch>
  <version epoch="0" ver="6.0" rel="12.2"/>
  <checksum type="sha" pkgid="YES">ad51ed5baa79bafd60c31f575d52fd7faf542162</checksum>
  <summary>WWW server logfile analysis program</summary>
  <description>Analog is a popular WWW server logfile analysis program with lots of features.
You should edit the /etc/analog.cfg and customize it for your webserver, in
particular you'll probably want to configure the HOSTNAME and HOSTURL options.
Perl is required if you want to use the html forms interface (which is not
installed automatically by this package - see the documentation for instructions).</description>
  <packager></packager>
  <url>http://www.analog.cx/</url>
  <time file="1625560371" build="1625560364"/>
  <size package="1654427" installed="2196426" archive="2198732"/>
  <location href="src/analog-6.0-12.2.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Utilities</rpm:group>
    <rpm:buildhost>lamb18</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="6048"/>
    <rpm:requires>
      <rpm:entry name="apache2-devel"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>analog</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="6.0" rel="12.2"/>
  <checksum type="sha" pkgid="YES">708bf86e6ee3b02737a125f502bc8135a21a00a5</checksum>
  <summary>WWW server logfile analysis program</summary>
  <description>Analog is a popular WWW server logfile analysis program with lots of features.
You should edit the /etc/analog.cfg and customize it for your webserver, in
particular you'll probably want to configure the HOSTNAME and HOSTURL options.
Perl is required if you want to use the html forms interface (which is not
installed automatically by this package - see the documentation for instructions).</description>
  <packager></packager>
  <url>http://www.analog.cx/</url>
  <time file="1625560371" build="1625560364"/>
  <size package="1411587" installed="4046899" archive="4118820"/>
  <location href="x86_64/analog-6.0-12.2.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Utilities</rpm:group>
    <rpm:buildhost>lamb18</rpm:buildhost>
    <rpm:sourcerpm>analog-6.0-12.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="46280"/>
    <rpm:provides>
      <rpm:entry name="analog" flags="EQ" epoch="0" ver="6.0" rel="12.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/perl"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)(64bit)"/>
    </rpm:requires>
    <file type="dir">/etc/analog</file>
    <file>/etc/analog/RefSpam.txt</file>
    <file>/etc/analog/RobotInclude.txt</file>
    <file>/etc/analog/SearchEngines.txt</file>
    <file>/etc/analog/TypeAlias.txt</file>
    <file>/etc/analog/analog.cfg</file>
    <file>/etc/apache2/conf.d/analog.conf</file>
    <file>/etc/cron.d/analog</file>
    <file>/usr/bin/analog</file>
    <file>/usr/bin/analog-monthly</file>
    <file>/usr/bin/rebuild_analog_stats</file>
    <file>/usr/bin/split-logfile2-bymonth</file>
  </format>
</package>
<package type="rpm">
  <name>anyterm</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.1.29" rel="39.1"/>
  <checksum type="sha" pkgid="YES">03761987113db5328c972b4888b0d2459cc4d16c</checksum>
  <summary>A web-based terminal emulator</summary>
  <description>The Anyterm web-based terminal emulator, permits terminal and/or arbitrary
command access via http. The anyterm daemon can be configured to run any
arbitrary command, redirecting all standard input / output / error to
and from any javascript-enabled web browser in real time.</description>
  <packager></packager>
  <url>http://anyterm.org</url>
  <time file="1625560106" build="1625560101"/>
  <size package="193428" installed="659580" archive="662124"/>
  <location href="i586/anyterm-1.1.29-39.1.i586.rpm"/>
  <format>
    <rpm:license>GPLv2+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Internet</rpm:group>
    <rpm:buildhost>goat11</rpm:buildhost>
    <rpm:sourcerpm>anyterm-1.1.29-39.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5964"/>
    <rpm:provides>
      <rpm:entry name="anyterm" flags="EQ" epoch="0" ver="1.1.29" rel="39.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="pwdutils" pre="1"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libm.so.6(GLIBC_2.0)"/>
      <rpm:entry name="libpthread.so.0"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.0)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.1)"/>
      <rpm:entry name="libstdc++.so.6"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3.1)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)"/>
      <rpm:entry name="libutil.so.1"/>
      <rpm:entry name="libutil.so.1(GLIBC_2.0)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.2)"/>
    </rpm:requires>
    <file>/etc/init.d/anyterm</file>
    <file>/usr/sbin/anytermd</file>
    <file>/usr/sbin/rcanyterm</file>
  </format>
</package>
<package type="rpm">
  <name>anyterm</name>
  <arch>src</arch>
  <version epoch="0" ver="1.1.29" rel="39.1"/>
  <checksum type="sha" pkgid="YES">c90b14cd9270cf0dd4777cf45853347867b08952</checksum>
  <summary>A web-based terminal emulator</summary>
  <description>The Anyterm web-based terminal emulator, permits terminal and/or arbitrary
command access via http. The anyterm daemon can be configured to run any
arbitrary command, redirecting all standard input / output / error to
and from any javascript-enabled web browser in real time.</description>
  <packager></packager>
  <url>http://anyterm.org</url>
  <time file="1625560534" build="1625560530"/>
  <size package="187308" installed="189295" archive="190596"/>
  <location href="src/anyterm-1.1.29-39.1.src.rpm"/>
  <format>
    <rpm:license>GPLv2+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Internet</rpm:group>
    <rpm:buildhost>goat07</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="4050"/>
    <rpm:requires>
      <rpm:entry name="boost-devel"/>
      <rpm:entry name="zlib-devel"/>
      <rpm:entry name="gcc-c++"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>anyterm</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.1.29" rel="39.1"/>
  <checksum type="sha" pkgid="YES">2d1307cbbb240e0334e253a5cf1c157c2bf6977f</checksum>
  <summary>A web-based terminal emulator</summary>
  <description>The Anyterm web-based terminal emulator, permits terminal and/or arbitrary
command access via http. The anyterm daemon can be configured to run any
arbitrary command, redirecting all standard input / output / error to
and from any javascript-enabled web browser in real time.</description>
  <packager></packager>
  <url>http://anyterm.org</url>
  <time file="1625560534" build="1625560530"/>
  <size package="196765" installed="684478" archive="687028"/>
  <location href="x86_64/anyterm-1.1.29-39.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPLv2+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Internet</rpm:group>
    <rpm:buildhost>goat07</rpm:buildhost>
    <rpm:sourcerpm>anyterm-1.1.29-39.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5956"/>
    <rpm:provides>
      <rpm:entry name="anyterm" flags="EQ" epoch="0" ver="1.1.29" rel="39.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="pwdutils" pre="1"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="libgcc_s.so.1()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libpthread.so.0()(64bit)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libstdc++.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3.1)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)(64bit)"/>
      <rpm:entry name="libutil.so.1()(64bit)"/>
      <rpm:entry name="libutil.so.1(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.2.5)(64bit)"/>
    </rpm:requires>
    <file>/etc/init.d/anyterm</file>
    <file>/usr/sbin/anytermd</file>
    <file>/usr/sbin/rcanyterm</file>
  </format>
</package>
<package type="rpm">
  <name>anyterm-httpd</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.1.29" rel="39.1"/>
  <checksum type="sha" pkgid="YES">d0f6371fb99dca52cfa13f82558c87e4a52b1f01</checksum>
  <summary>Httpd proxy configuration for anyterm</summary>
  <description>The httpd configuration necessary to proxy anyterm.</description>
  <packager></packager>
  <url>http://anyterm.org</url>
  <time file="1625560106" build="1625560101"/>
  <size package="3856" installed="592" archive="1116"/>
  <location href="i586/anyterm-httpd-1.1.29-39.1.i586.rpm"/>
  <format>
    <rpm:license>GPLv2+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Internet</rpm:group>
    <rpm:buildhost>goat11</rpm:buildhost>
    <rpm:sourcerpm>anyterm-1.1.29-39.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="3386"/>
    <rpm:provides>
      <rpm:entry name="anyterm-httpd" flags="EQ" epoch="0" ver="1.1.29" rel="39.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="anyterm" flags="EQ" epoch="0" ver="1.1.29" rel="39.1"/>
      <rpm:entry name="httpd"/>
    </rpm:requires>
    <file type="dir">/etc/apache2</file>
    <file type="dir">/etc/apache2/conf.d</file>
    <file>/etc/apache2/conf.d/anyterm.conf</file>
  </format>
</package>
<package type="rpm">
  <name>anyterm-httpd</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.1.29" rel="39.1"/>
  <checksum type="sha" pkgid="YES">dcc335da16b928f96c723d13bcf07d323d1a4d8d</checksum>
  <summary>Httpd proxy configuration for anyterm</summary>
  <description>The httpd configuration necessary to proxy anyterm.</description>
  <packager></packager>
  <url>http://anyterm.org</url>
  <time file="1625560534" build="1625560530"/>
  <size package="3835" installed="592" archive="1116"/>
  <location href="x86_64/anyterm-httpd-1.1.29-39.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPLv2+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Internet</rpm:group>
    <rpm:buildhost>goat07</rpm:buildhost>
    <rpm:sourcerpm>anyterm-1.1.29-39.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="3366"/>
    <rpm:provides>
      <rpm:entry name="anyterm-httpd" flags="EQ" epoch="0" ver="1.1.29" rel="39.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="anyterm" flags="EQ" epoch="0" ver="1.1.29" rel="39.1"/>
      <rpm:entry name="httpd"/>
    </rpm:requires>
    <file type="dir">/etc/apache2</file>
    <file type="dir">/etc/apache2/conf.d</file>
    <file>/etc/apache2/conf.d/anyterm.conf</file>
  </format>
</package>
<package type="rpm">
  <name>apache2-mod_evasive</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.10.1" rel="5.11.1"/>
  <checksum type="sha" pkgid="YES">0683dd00f4172f1cc45038144ebe23aab90379bf</checksum>
  <summary>Denial of Service evasion module for Apache</summary>
  <description>mod_evasive is an evasive maneuvers module for Apache to provide
evasive action in the event of an HTTP DoS or DDoS attack or brute
force attack. It is also designed to be a detection and network
management tool, and can be easily configured to talk to ipchains,
firewalls, routers, and etcetera. mod_evasive presently reports
abuses via email and syslog facilities.</description>
  <packager></packager>
  <url>http://zdziarski.com/blog/?page_id=442</url>
  <time file="1666684714" build="1666684711"/>
  <size package="35477" installed="77196" archive="78444"/>
  <location href="i586/apache2-mod_evasive-1.10.1-5.11.1.i586.rpm"/>
  <format>
    <rpm:license>GPL-2.0-or-later</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Web/Servers</rpm:group>
    <rpm:buildhost>old-cirrus4</rpm:buildhost>
    <rpm:sourcerpm>apache2-mod_evasive-1.10.1-5.11.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4049"/>
    <rpm:provides>
      <rpm:entry name="mod_evasive20.so"/>
      <rpm:entry name="apache2-mod_evasive" flags="EQ" epoch="0" ver="1.10.1" rel="5.11.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="apache_mmn_20051115"/>
      <rpm:entry name="apache2"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
    <file>/etc/apache2/conf.d/mod_evasive.conf</file>
  </format>
</package>
<package type="rpm">
  <name>apache2-mod_evasive</name>
  <arch>src</arch>
  <version epoch="0" ver="1.10.1" rel="5.11.1"/>
  <checksum type="sha" pkgid="YES">dba3b8d8313b0c29b721ea66185a166200ad48df</checksum>
  <summary>Denial of Service evasion module for Apache</summary>
  <description>mod_evasive is an evasive maneuvers module for Apache to provide
evasive action in the event of an HTTP DoS or DDoS attack or brute
force attack. It is also designed to be a detection and network
management tool, and can be easily configured to talk to ipchains,
firewalls, routers, and etcetera. mod_evasive presently reports
abuses via email and syslog facilities.</description>
  <packager></packager>
  <url>http://zdziarski.com/blog/?page_id=442</url>
  <time file="1666684751" build="1666684747"/>
  <size package="29020" installed="30032" archive="30836"/>
  <location href="src/apache2-mod_evasive-1.10.1-5.11.1.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0-or-later</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Web/Servers</rpm:group>
    <rpm:buildhost>goat09</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="3450"/>
    <rpm:requires>
      <rpm:entry name="apache2-devel"/>
      <rpm:entry name="apache2-prefork"/>
      <rpm:entry name="curl-devel"/>
      <rpm:entry name="gcc-c++"/>
      <rpm:entry name="pcre-devel"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>apache2-mod_evasive</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.10.1" rel="5.11.1"/>
  <checksum type="sha" pkgid="YES">b5db7298f7ca5a195c5964f06b182880d17779ce</checksum>
  <summary>Denial of Service evasion module for Apache</summary>
  <description>mod_evasive is an evasive maneuvers module for Apache to provide
evasive action in the event of an HTTP DoS or DDoS attack or brute
force attack. It is also designed to be a detection and network
management tool, and can be easily configured to talk to ipchains,
firewalls, routers, and etcetera. mod_evasive presently reports
abuses via email and syslog facilities.</description>
  <packager></packager>
  <url>http://zdziarski.com/blog/?page_id=442</url>
  <time file="1666684751" build="1666684747"/>
  <size package="36120" installed="86297" archive="87544"/>
  <location href="x86_64/apache2-mod_evasive-1.10.1-5.11.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPL-2.0-or-later</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Web/Servers</rpm:group>
    <rpm:buildhost>goat09</rpm:buildhost>
    <rpm:sourcerpm>apache2-mod_evasive-1.10.1-5.11.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4007"/>
    <rpm:provides>
      <rpm:entry name="mod_evasive20.so()(64bit)"/>
      <rpm:entry name="apache2-mod_evasive" flags="EQ" epoch="0" ver="1.10.1" rel="5.11.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="apache_mmn_20051115"/>
      <rpm:entry name="apache2"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)(64bit)"/>
    </rpm:requires>
    <file>/etc/apache2/conf.d/mod_evasive.conf</file>
  </format>
</package>
<package type="rpm">
  <name>bacula</name>
  <arch>src</arch>
  <version epoch="0" ver="5.0.3" rel="50.2"/>
  <checksum type="sha" pkgid="YES">dbba5a19e4a037c95731e781e5f01534046c9a21</checksum>
  <summary>Bacula - The Network Backup Solution</summary>
  <description>Bacula - The Leading Open Source Backup Solution.

Bacula is a set of computer programs that permit you (or the system
administrator) to manage backup, recovery, and verification of computer
data across a network of computers of different kinds. In technical terms,
it is a network client/server based backup program. Bacula is relatively
easy to use and efficient, while offering many advanced storage management
features that make it easy to find and recover lost or damaged files.
Bacula source code has been released under the AGPL version 3 license.</description>
  <packager>D. Scott Barninger &lt;barninger@fairfieldcomputers.com&gt;</packager>
  <url>http://www.bacula.org/</url>
  <time file="1625560753" build="1625560747"/>
  <size package="5595869" installed="5686228" archive="5687016"/>
  <location href="src/bacula-5.0.3-50.2.src.rpm"/>
  <format>
    <rpm:license>AGPLv3</rpm:license>
    <rpm:vendor>The Bacula Team</rpm:vendor>
    <rpm:group>System Environment/Daemons</rpm:group>
    <rpm:buildhost>goat07</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="7106"/>
    <rpm:requires>
      <rpm:entry name="mysql-devel"/>
      <rpm:entry name="mysql-client"/>
      <rpm:entry name="mysql"/>
      <rpm:entry name="openssl"/>
      <rpm:entry name="pwdutils"/>
      <rpm:entry name="sysconfig"/>
      <rpm:entry name="gcc"/>
      <rpm:entry name="gcc-c++"/>
      <rpm:entry name="make"/>
      <rpm:entry name="autoconf"/>
      <rpm:entry name="glibc"/>
      <rpm:entry name="glibc-devel"/>
      <rpm:entry name="ncurses-devel"/>
      <rpm:entry name="perl"/>
      <rpm:entry name="readline-devel"/>
      <rpm:entry name="libstdc++-devel"/>
      <rpm:entry name="zlib-devel"/>
      <rpm:entry name="openssl-devel"/>
      <rpm:entry name="libacl-devel"/>
      <rpm:entry name="pkgconfig"/>
      <rpm:entry name="libxml2-devel"/>
      <rpm:entry name="python"/>
      <rpm:entry name="python-devel"/>
      <rpm:entry name="termcap"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>bacula-client</name>
  <arch>i586</arch>
  <version epoch="0" ver="5.0.3" rel="50.2"/>
  <checksum type="sha" pkgid="YES">2b154bfe8ccf9696820730a899610a779c9a894f</checksum>
  <summary>Bacula - The Network Backup Solution</summary>
  <description>Bacula - The Leading Open Source Backup Solution.

Bacula is a set of computer programs that permit you (or the system
administrator) to manage backup, recovery, and verification of computer
data across a network of computers of different kinds. In technical terms,
it is a network client/server based backup program. Bacula is relatively
easy to use and efficient, while offering many advanced storage management
features that make it easy to find and recover lost or damaged files.
Bacula source code has been released under the AGPL version 3 license.

This is the File daemon (Client) only package. It includes the command line
console program.

This build includes python scripting support.</description>
  <packager>D. Scott Barninger &lt;barninger@fairfieldcomputers.com&gt;</packager>
  <url>http://www.bacula.org/</url>
  <time file="1625560715" build="1625560710"/>
  <size package="103994" installed="234707" archive="237340"/>
  <location href="i586/bacula-client-5.0.3-50.2.i586.rpm"/>
  <format>
    <rpm:license>AGPLv3</rpm:license>
    <rpm:vendor>The Bacula Team</rpm:vendor>
    <rpm:group>System Environment/Daemons</rpm:group>
    <rpm:buildhost>goat13</rpm:buildhost>
    <rpm:sourcerpm>bacula-5.0.3-50.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="11155"/>
    <rpm:provides>
      <rpm:entry name="bacula-fd"/>
      <rpm:entry name="bacula"/>
      <rpm:entry name="bacula-client" flags="EQ" epoch="0" ver="5.0.3" rel="50.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libstdc++"/>
      <rpm:entry name="zlib"/>
      <rpm:entry name="openssl"/>
      <rpm:entry name="glibc"/>
      <rpm:entry name="readline"/>
      <rpm:entry name="bacula-libs"/>
      <rpm:entry name="termcap"/>
      <rpm:entry name="python" flags="GE" epoch="0" ver="2.4"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libacl.so.1"/>
      <rpm:entry name="libacl.so.1(ACL_1.0)"/>
      <rpm:entry name="libbac-5.0.3.so"/>
      <rpm:entry name="libbaccfg-5.0.3.so"/>
      <rpm:entry name="libbacfind-5.0.3.so"/>
      <rpm:entry name="libbacpy-5.0.3.so"/>
      <rpm:entry name="libcrypto.so.0.9.8"/>
      <rpm:entry name="libdl.so.2"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GLIBC_2.0)"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libncurses.so.5"/>
      <rpm:entry name="libpthread.so.0"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.0)"/>
      <rpm:entry name="libreadline.so.5"/>
      <rpm:entry name="librt.so.1"/>
      <rpm:entry name="libssl.so.0.9.8"/>
      <rpm:entry name="libstdc++.so.6"/>
      <rpm:entry name="libutil.so.1"/>
      <rpm:entry name="libz.so.1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="bacula-mysql"/>
      <rpm:entry name="bacula-sqlite"/>
      <rpm:entry name="bacula-postgresql"/>
    </rpm:conflicts>
    <file type="dir">/etc/bacula</file>
    <file>/etc/bacula/bacula-fd.conf</file>
    <file>/etc/bacula/bconsole.conf</file>
    <file>/etc/init.d/bacula-fd</file>
    <file>/etc/logrotate.d/bacula</file>
    <file>/usr/sbin/bacula-fd</file>
    <file>/usr/sbin/bconsole</file>
    <file>/usr/sbin/btraceback</file>
  </format>
</package>
<package type="rpm">
  <name>bacula-client</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="5.0.3" rel="50.2"/>
  <checksum type="sha" pkgid="YES">b5b2400e9c44bae7d28d3454e592e359a88d5d0f</checksum>
  <summary>Bacula - The Network Backup Solution</summary>
  <description>Bacula - The Leading Open Source Backup Solution.

Bacula is a set of computer programs that permit you (or the system
administrator) to manage backup, recovery, and verification of computer
data across a network of computers of different kinds. In technical terms,
it is a network client/server based backup program. Bacula is relatively
easy to use and efficient, while offering many advanced storage management
features that make it easy to find and recover lost or damaged files.
Bacula source code has been released under the AGPL version 3 license.

This is the File daemon (Client) only package. It includes the command line
console program.

This build includes python scripting support.</description>
  <packager>D. Scott Barninger &lt;barninger@fairfieldcomputers.com&gt;</packager>
  <url>http://www.bacula.org/</url>
  <time file="1625560753" build="1625560747"/>
  <size package="109881" installed="255116" archive="257756"/>
  <location href="x86_64/bacula-client-5.0.3-50.2.x86_64.rpm"/>
  <format>
    <rpm:license>AGPLv3</rpm:license>
    <rpm:vendor>The Bacula Team</rpm:vendor>
    <rpm:group>System Environment/Daemons</rpm:group>
    <rpm:buildhost>goat07</rpm:buildhost>
    <rpm:sourcerpm>bacula-5.0.3-50.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="11323"/>
    <rpm:provides>
      <rpm:entry name="bacula-fd"/>
      <rpm:entry name="bacula"/>
      <rpm:entry name="bacula-client" flags="EQ" epoch="0" ver="5.0.3" rel="50.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libstdc++"/>
      <rpm:entry name="zlib"/>
      <rpm:entry name="openssl"/>
      <rpm:entry name="glibc"/>
      <rpm:entry name="readline"/>
      <rpm:entry name="bacula-libs"/>
      <rpm:entry name="termcap"/>
      <rpm:entry name="python" flags="GE" epoch="0" ver="2.4"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libacl.so.1()(64bit)"/>
      <rpm:entry name="libacl.so.1(ACL_1.0)(64bit)"/>
      <rpm:entry name="libbac-5.0.3.so()(64bit)"/>
      <rpm:entry name="libbaccfg-5.0.3.so()(64bit)"/>
      <rpm:entry name="libbacfind-5.0.3.so()(64bit)"/>
      <rpm:entry name="libbacpy-5.0.3.so()(64bit)"/>
      <rpm:entry name="libcrypto.so.0.9.8()(64bit)"/>
      <rpm:entry name="libdl.so.2()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1()(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libncurses.so.5()(64bit)"/>
      <rpm:entry name="libpthread.so.0()(64bit)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libpython2.4.so.1.0()(64bit)"/>
      <rpm:entry name="libreadline.so.5()(64bit)"/>
      <rpm:entry name="librt.so.1()(64bit)"/>
      <rpm:entry name="libssl.so.0.9.8()(64bit)"/>
      <rpm:entry name="libstdc++.so.6()(64bit)"/>
      <rpm:entry name="libutil.so.1()(64bit)"/>
      <rpm:entry name="libz.so.1()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)(64bit)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="bacula-mysql"/>
      <rpm:entry name="bacula-sqlite"/>
      <rpm:entry name="bacula-postgresql"/>
    </rpm:conflicts>
    <file type="dir">/etc/bacula</file>
    <file>/etc/bacula/bacula-fd.conf</file>
    <file>/etc/bacula/bconsole.conf</file>
    <file>/etc/init.d/bacula-fd</file>
    <file>/etc/logrotate.d/bacula</file>
    <file>/usr/sbin/bacula-fd</file>
    <file>/usr/sbin/bconsole</file>
    <file>/usr/sbin/btraceback</file>
  </format>
</package>
<package type="rpm">
  <name>bacula-libs</name>
  <arch>i586</arch>
  <version epoch="0" ver="5.0.3" rel="50.2"/>
  <checksum type="sha" pkgid="YES">43109f3ee8266480e2b3c9a03bdd389ab6458cd6</checksum>
  <summary>Bacula - The Network Backup Solution</summary>
  <description>Bacula - The Leading Open Source Backup Solution.

Bacula is a set of computer programs that permit you (or the system
administrator) to manage backup, recovery, and verification of computer
data across a network of computers of different kinds. In technical terms,
it is a network client/server based backup program. Bacula is relatively
easy to use and efficient, while offering many advanced storage management
features that make it easy to find and recover lost or damaged files.
Bacula source code has been released under the AGPL version 3 license.

This package installs the shared libraries used by many bacula programs.</description>
  <packager>D. Scott Barninger &lt;barninger@fairfieldcomputers.com&gt;</packager>
  <url>http://www.bacula.org/</url>
  <time file="1625560715" build="1625560710"/>
  <size package="636430" installed="1719058" archive="1726076"/>
  <location href="i586/bacula-libs-5.0.3-50.2.i586.rpm"/>
  <format>
    <rpm:license>AGPLv3</rpm:license>
    <rpm:vendor>The Bacula Team</rpm:vendor>
    <rpm:group>System Environment/Daemons</rpm:group>
    <rpm:buildhost>goat13</rpm:buildhost>
    <rpm:sourcerpm>bacula-5.0.3-50.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="11664"/>
    <rpm:provides>
      <rpm:entry name="libbac-5.0.3.so"/>
      <rpm:entry name="libbaccfg-5.0.3.so"/>
      <rpm:entry name="libbacfind-5.0.3.so"/>
      <rpm:entry name="libbacpy-5.0.3.so"/>
      <rpm:entry name="bacula-libs" flags="EQ" epoch="0" ver="5.0.3" rel="50.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GLIBC_2.0)"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libm.so.6(GLIBC_2.0)"/>
      <rpm:entry name="librt.so.1"/>
      <rpm:entry name="libstdc++.so.6"/>
      <rpm:entry name="libutil.so.1"/>
      <rpm:entry name="libutil.so.1(GLIBC_2.0)"/>
      <rpm:entry name="libz.so.1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>bacula-libs</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="5.0.3" rel="50.2"/>
  <checksum type="sha" pkgid="YES">f43061874e885cde1f902d710f7aa4c58f27f02b</checksum>
  <summary>Bacula - The Network Backup Solution</summary>
  <description>Bacula - The Leading Open Source Backup Solution.

Bacula is a set of computer programs that permit you (or the system
administrator) to manage backup, recovery, and verification of computer
data across a network of computers of different kinds. In technical terms,
it is a network client/server based backup program. Bacula is relatively
easy to use and efficient, while offering many advanced storage management
features that make it easy to find and recover lost or damaged files.
Bacula source code has been released under the AGPL version 3 license.

This package installs the shared libraries used by many bacula programs.</description>
  <packager>D. Scott Barninger &lt;barninger@fairfieldcomputers.com&gt;</packager>
  <url>http://www.bacula.org/</url>
  <time file="1625560753" build="1625560747"/>
  <size package="223163" installed="652427" archive="659544"/>
  <location href="x86_64/bacula-libs-5.0.3-50.2.x86_64.rpm"/>
  <format>
    <rpm:license>AGPLv3</rpm:license>
    <rpm:vendor>The Bacula Team</rpm:vendor>
    <rpm:group>System Environment/Daemons</rpm:group>
    <rpm:buildhost>goat07</rpm:buildhost>
    <rpm:sourcerpm>bacula-5.0.3-50.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="11596"/>
    <rpm:provides>
      <rpm:entry name="libbac-5.0.3.so()(64bit)"/>
      <rpm:entry name="libbaccfg-5.0.3.so()(64bit)"/>
      <rpm:entry name="libbacfind-5.0.3.so()(64bit)"/>
      <rpm:entry name="libbacpy-5.0.3.so()(64bit)"/>
      <rpm:entry name="bacula-libs" flags="EQ" epoch="0" ver="5.0.3" rel="50.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libgcc_s.so.1()(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libpython2.4.so.1.0()(64bit)"/>
      <rpm:entry name="librt.so.1()(64bit)"/>
      <rpm:entry name="libstdc++.so.6()(64bit)"/>
      <rpm:entry name="libutil.so.1()(64bit)"/>
      <rpm:entry name="libz.so.1()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>bacula-mysql</name>
  <arch>i586</arch>
  <version epoch="0" ver="5.0.3" rel="50.2"/>
  <checksum type="sha" pkgid="YES">07d4c27197325169267243969cb35262e2202816</checksum>
  <summary>Bacula - The Network Backup Solution</summary>
  <description>








Requires: python &gt;= 2.4


Bacula - The Leading Open Source Backup Solution.

Bacula is a set of computer programs that permit you (or the system
administrator) to manage backup, recovery, and verification of computer
data across a network of computers of different kinds. In technical terms,
it is a network client/server based backup program. Bacula is relatively
easy to use and efficient, while offering many advanced storage management
features that make it easy to find and recover lost or damaged files.
Bacula source code has been released under the AGPL version 3 license.


This build requires MySQL to be installed separately as the catalog database.








This build includes python scripting support.</description>
  <packager>D. Scott Barninger &lt;barninger@fairfieldcomputers.com&gt;</packager>
  <url>http://www.bacula.org/</url>
  <time file="1625560715" build="1625560710"/>
  <size package="1076679" installed="3410997" archive="3421540"/>
  <location href="i586/bacula-mysql-5.0.3-50.2.i586.rpm"/>
  <format>
    <rpm:license>AGPLv3</rpm:license>
    <rpm:vendor>The Bacula Team</rpm:vendor>
    <rpm:group>System Environment/Daemons</rpm:group>
    <rpm:buildhost>goat13</rpm:buildhost>
    <rpm:sourcerpm>bacula-5.0.3-50.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="22305"/>
    <rpm:provides>
      <rpm:entry name="bacula-dir"/>
      <rpm:entry name="bacula-sd"/>
      <rpm:entry name="bacula-fd"/>
      <rpm:entry name="bacula-server"/>
      <rpm:entry name="bpipe-fd.so"/>
      <rpm:entry name="libbacsql-5.0.3.so"/>
      <rpm:entry name="bacula-mysql" flags="EQ" epoch="0" ver="5.0.3" rel="50.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="ncurses"/>
      <rpm:entry name="libstdc++"/>
      <rpm:entry name="zlib"/>
      <rpm:entry name="openssl"/>
      <rpm:entry name="glibc"/>
      <rpm:entry name="readline"/>
      <rpm:entry name="bacula-libs"/>
      <rpm:entry name="termcap"/>
      <rpm:entry name="mysql"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/env"/>
      <rpm:entry name="/usr/bin/perl"/>
      <rpm:entry name="/usr/bin/python"/>
      <rpm:entry name="libacl.so.1"/>
      <rpm:entry name="libacl.so.1(ACL_1.0)"/>
      <rpm:entry name="libbac-5.0.3.so"/>
      <rpm:entry name="libbaccfg-5.0.3.so"/>
      <rpm:entry name="libbacfind-5.0.3.so"/>
      <rpm:entry name="libbacpy-5.0.3.so"/>
      <rpm:entry name="libcrypt.so.1"/>
      <rpm:entry name="libcrypto.so.0.9.8"/>
      <rpm:entry name="libdl.so.2"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GLIBC_2.0)"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libmysqlclient_r.so.15"/>
      <rpm:entry name="libncurses.so.5"/>
      <rpm:entry name="libnsl.so.1"/>
      <rpm:entry name="libpthread.so.0"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.0)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.1)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.2)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.3.2)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.3.3)"/>
      <rpm:entry name="libreadline.so.5"/>
      <rpm:entry name="librt.so.1"/>
      <rpm:entry name="libssl.so.0.9.8"/>
      <rpm:entry name="libstdc++.so.6"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)"/>
      <rpm:entry name="libutil.so.1"/>
      <rpm:entry name="libz.so.1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="bacula-client"/>
      <rpm:entry name="bacula"/>
    </rpm:conflicts>
    <file type="dir">/etc/bacula</file>
    <file>/etc/bacula/bacula-dir.conf</file>
    <file>/etc/bacula/bacula-fd.conf</file>
    <file>/etc/bacula/bacula-sd.conf</file>
    <file>/etc/bacula/bconsole.conf</file>
    <file>/etc/init.d/bacula-dir</file>
    <file>/etc/init.d/bacula-fd</file>
    <file>/etc/init.d/bacula-sd</file>
    <file>/etc/logrotate.d/bacula</file>
    <file type="dir">/etc/logwatch</file>
    <file type="dir">/etc/logwatch/conf</file>
    <file type="dir">/etc/logwatch/conf/logfiles</file>
    <file>/etc/logwatch/conf/logfiles/bacula.conf</file>
    <file type="dir">/etc/logwatch/conf/services</file>
    <file>/etc/logwatch/conf/services/bacula.conf</file>
    <file type="dir">/etc/logwatch/scripts</file>
    <file type="dir">/etc/logwatch/scripts/services</file>
    <file>/etc/logwatch/scripts/services/bacula</file>
    <file type="dir">/etc/logwatch/scripts/shared</file>
    <file>/etc/logwatch/scripts/shared/applybaculadate</file>
    <file>/usr/sbin/bacula</file>
    <file>/usr/sbin/bacula-dir</file>
    <file>/usr/sbin/bacula-fd</file>
    <file>/usr/sbin/bacula-sd</file>
    <file>/usr/sbin/bconsole</file>
    <file>/usr/sbin/bcopy</file>
    <file>/usr/sbin/bextract</file>
    <file>/usr/sbin/bls</file>
    <file>/usr/sbin/bregex</file>
    <file>/usr/sbin/bscan</file>
    <file>/usr/sbin/bsmtp</file>
    <file>/usr/sbin/btape</file>
    <file>/usr/sbin/btraceback</file>
    <file>/usr/sbin/bwild</file>
    <file>/usr/sbin/dbcheck</file>
  </format>
</package>
<package type="rpm">
  <name>bacula-mysql</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="5.0.3" rel="50.2"/>
  <checksum type="sha" pkgid="YES">eac489f60f0d1044da5a5cc57ef41fea9df1b385</checksum>
  <summary>Bacula - The Network Backup Solution</summary>
  <description>








Requires: python &gt;= 2.4


Bacula - The Leading Open Source Backup Solution.

Bacula is a set of computer programs that permit you (or the system
administrator) to manage backup, recovery, and verification of computer
data across a network of computers of different kinds. In technical terms,
it is a network client/server based backup program. Bacula is relatively
easy to use and efficient, while offering many advanced storage management
features that make it easy to find and recover lost or damaged files.
Bacula source code has been released under the AGPL version 3 license.


This build requires MySQL to be installed separately as the catalog database.








This build includes python scripting support.</description>
  <packager>D. Scott Barninger &lt;barninger@fairfieldcomputers.com&gt;</packager>
  <url>http://www.bacula.org/</url>
  <time file="1625560753" build="1625560747"/>
  <size package="1145907" installed="3500772" archive="3511380"/>
  <location href="x86_64/bacula-mysql-5.0.3-50.2.x86_64.rpm"/>
  <format>
    <rpm:license>AGPLv3</rpm:license>
    <rpm:vendor>The Bacula Team</rpm:vendor>
    <rpm:group>System Environment/Daemons</rpm:group>
    <rpm:buildhost>goat07</rpm:buildhost>
    <rpm:sourcerpm>bacula-5.0.3-50.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="22357"/>
    <rpm:provides>
      <rpm:entry name="bacula-dir"/>
      <rpm:entry name="bacula-sd"/>
      <rpm:entry name="bacula-fd"/>
      <rpm:entry name="bacula-server"/>
      <rpm:entry name="bpipe-fd.so()(64bit)"/>
      <rpm:entry name="libbacsql-5.0.3.so()(64bit)"/>
      <rpm:entry name="bacula-mysql" flags="EQ" epoch="0" ver="5.0.3" rel="50.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="ncurses"/>
      <rpm:entry name="libstdc++"/>
      <rpm:entry name="zlib"/>
      <rpm:entry name="openssl"/>
      <rpm:entry name="glibc"/>
      <rpm:entry name="readline"/>
      <rpm:entry name="bacula-libs"/>
      <rpm:entry name="termcap"/>
      <rpm:entry name="mysql"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/env"/>
      <rpm:entry name="/usr/bin/perl"/>
      <rpm:entry name="/usr/bin/python"/>
      <rpm:entry name="libacl.so.1()(64bit)"/>
      <rpm:entry name="libacl.so.1(ACL_1.0)(64bit)"/>
      <rpm:entry name="libbac-5.0.3.so()(64bit)"/>
      <rpm:entry name="libbaccfg-5.0.3.so()(64bit)"/>
      <rpm:entry name="libbacfind-5.0.3.so()(64bit)"/>
      <rpm:entry name="libbacpy-5.0.3.so()(64bit)"/>
      <rpm:entry name="libcrypto.so.0.9.8()(64bit)"/>
      <rpm:entry name="libdl.so.2()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1()(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libmysqlclient_r.so.15()(64bit)"/>
      <rpm:entry name="libncurses.so.5()(64bit)"/>
      <rpm:entry name="libpthread.so.0()(64bit)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.3.2)(64bit)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.3.3)(64bit)"/>
      <rpm:entry name="libpython2.4.so.1.0()(64bit)"/>
      <rpm:entry name="libreadline.so.5()(64bit)"/>
      <rpm:entry name="librt.so.1()(64bit)"/>
      <rpm:entry name="libssl.so.0.9.8()(64bit)"/>
      <rpm:entry name="libstdc++.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)(64bit)"/>
      <rpm:entry name="libutil.so.1()(64bit)"/>
      <rpm:entry name="libz.so.1()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)(64bit)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="bacula-client"/>
      <rpm:entry name="bacula"/>
    </rpm:conflicts>
    <file type="dir">/etc/bacula</file>
    <file>/etc/bacula/bacula-dir.conf</file>
    <file>/etc/bacula/bacula-fd.conf</file>
    <file>/etc/bacula/bacula-sd.conf</file>
    <file>/etc/bacula/bconsole.conf</file>
    <file>/etc/init.d/bacula-dir</file>
    <file>/etc/init.d/bacula-fd</file>
    <file>/etc/init.d/bacula-sd</file>
    <file>/etc/logrotate.d/bacula</file>
    <file type="dir">/etc/logwatch</file>
    <file type="dir">/etc/logwatch/conf</file>
    <file type="dir">/etc/logwatch/conf/logfiles</file>
    <file>/etc/logwatch/conf/logfiles/bacula.conf</file>
    <file type="dir">/etc/logwatch/conf/services</file>
    <file>/etc/logwatch/conf/services/bacula.conf</file>
    <file type="dir">/etc/logwatch/scripts</file>
    <file type="dir">/etc/logwatch/scripts/services</file>
    <file>/etc/logwatch/scripts/services/bacula</file>
    <file type="dir">/etc/logwatch/scripts/shared</file>
    <file>/etc/logwatch/scripts/shared/applybaculadate</file>
    <file>/usr/sbin/bacula</file>
    <file>/usr/sbin/bacula-dir</file>
    <file>/usr/sbin/bacula-fd</file>
    <file>/usr/sbin/bacula-sd</file>
    <file>/usr/sbin/bconsole</file>
    <file>/usr/sbin/bcopy</file>
    <file>/usr/sbin/bextract</file>
    <file>/usr/sbin/bls</file>
    <file>/usr/sbin/bregex</file>
    <file>/usr/sbin/bscan</file>
    <file>/usr/sbin/bsmtp</file>
    <file>/usr/sbin/btape</file>
    <file>/usr/sbin/btraceback</file>
    <file>/usr/sbin/bwild</file>
    <file>/usr/sbin/dbcheck</file>
  </format>
</package>
<package type="rpm">
  <name>bacula-updatedb</name>
  <arch>i586</arch>
  <version epoch="0" ver="5.0.3" rel="50.2"/>
  <checksum type="sha" pkgid="YES">1a7f68d6f74ed29a2b3836015d00edb69c317440</checksum>
  <summary>Bacula - The Network Backup Solution</summary>
  <description>Bacula - The Leading Open Source Backup Solution.

Bacula is a set of computer programs that permit you (or the system
administrator) to manage backup, recovery, and verification of computer
data across a network of computers of different kinds. In technical terms,
it is a network client/server based backup program. Bacula is relatively
easy to use and efficient, while offering many advanced storage management
features that make it easy to find and recover lost or damaged files.
Bacula source code has been released under the AGPL version 3 license.

This package installs scripts for updating older versions of the bacula
database.</description>
  <packager>D. Scott Barninger &lt;barninger@fairfieldcomputers.com&gt;</packager>
  <url>http://www.bacula.org/</url>
  <time file="1625560715" build="1625560710"/>
  <size package="19630" installed="128493" archive="133792"/>
  <location href="i586/bacula-updatedb-5.0.3-50.2.i586.rpm"/>
  <format>
    <rpm:license>AGPLv3</rpm:license>
    <rpm:vendor>The Bacula Team</rpm:vendor>
    <rpm:group>System Environment/Daemons</rpm:group>
    <rpm:buildhost>goat13</rpm:buildhost>
    <rpm:sourcerpm>bacula-5.0.3-50.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="10461"/>
    <rpm:provides>
      <rpm:entry name="bacula-updatedb" flags="EQ" epoch="0" ver="5.0.3" rel="50.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>bacula-updatedb</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="5.0.3" rel="50.2"/>
  <checksum type="sha" pkgid="YES">d53b290c47ba3d614aed01f9bec0c02a56369e8a</checksum>
  <summary>Bacula - The Network Backup Solution</summary>
  <description>Bacula - The Leading Open Source Backup Solution.

Bacula is a set of computer programs that permit you (or the system
administrator) to manage backup, recovery, and verification of computer
data across a network of computers of different kinds. In technical terms,
it is a network client/server based backup program. Bacula is relatively
easy to use and efficient, while offering many advanced storage management
features that make it easy to find and recover lost or damaged files.
Bacula source code has been released under the AGPL version 3 license.

This package installs scripts for updating older versions of the bacula
database.</description>
  <packager>D. Scott Barninger &lt;barninger@fairfieldcomputers.com&gt;</packager>
  <url>http://www.bacula.org/</url>
  <time file="1625560753" build="1625560747"/>
  <size package="19604" installed="128493" archive="133876"/>
  <location href="x86_64/bacula-updatedb-5.0.3-50.2.x86_64.rpm"/>
  <format>
    <rpm:license>AGPLv3</rpm:license>
    <rpm:vendor>The Bacula Team</rpm:vendor>
    <rpm:group>System Environment/Daemons</rpm:group>
    <rpm:buildhost>goat07</rpm:buildhost>
    <rpm:sourcerpm>bacula-5.0.3-50.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="10449"/>
    <rpm:provides>
      <rpm:entry name="bacula-updatedb" flags="EQ" epoch="0" ver="5.0.3" rel="50.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>bonnie++</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.97.1" rel="7.9.1"/>
  <checksum type="sha" pkgid="YES">d02dedb950b046f757e7074dfc310118b35fc0ea</checksum>
  <summary>A Bonnie-Like File System Benchmark</summary>
  <description>Bonnie++ is a benchmark suite aimed at performing a number of simple
hard drive and file system performance tests.</description>
  <packager></packager>
  <url></url>
  <time file="1666684720" build="1666684717"/>
  <size package="58965" installed="126896" archive="128456"/>
  <location href="i586/bonnie++-1.97.1-7.9.1.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System/Benchmark</rpm:group>
    <rpm:buildhost>lamb59</rpm:buildhost>
    <rpm:sourcerpm>bonnie++-1.97.1-7.9.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4072"/>
    <rpm:provides>
      <rpm:entry name="bonnie++-1.97"/>
      <rpm:entry name="bonnie++" flags="EQ" epoch="0" ver="1.97.1" rel="7.9.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/perl"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libm.so.6(GLIBC_2.0)"/>
      <rpm:entry name="libpthread.so.0"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.0)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.1)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.2)"/>
      <rpm:entry name="libstdc++.so.6"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.2)"/>
    </rpm:requires>
    <file>/usr/bin/bon_csv2html</file>
    <file>/usr/bin/bon_csv2txt</file>
    <file>/usr/bin/bonnie++</file>
    <file>/usr/bin/zcav</file>
  </format>
</package>
<package type="rpm">
  <name>bonnie++</name>
  <arch>src</arch>
  <version epoch="0" ver="1.97.1" rel="7.9.1"/>
  <checksum type="sha" pkgid="YES">82a92ddb582e9e3397179499935e344c578f5418</checksum>
  <summary>A Bonnie-Like File System Benchmark</summary>
  <description>Bonnie++ is a benchmark suite aimed at performing a number of simple
hard drive and file system performance tests.</description>
  <packager></packager>
  <url></url>
  <time file="1666684768" build="1666684765"/>
  <size package="106805" installed="105326" archive="105704"/>
  <location href="src/bonnie++-1.97.1-7.9.1.src.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System/Benchmark</rpm:group>
    <rpm:buildhost>old-cirrus3</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2530"/>
    <rpm:requires>
      <rpm:entry name="gcc-c++"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>bonnie++</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.97.1" rel="7.9.1"/>
  <checksum type="sha" pkgid="YES">c8ff7c352e67cca2b133d3ab58191dec7d7de8c4</checksum>
  <summary>A Bonnie-Like File System Benchmark</summary>
  <description>Bonnie++ is a benchmark suite aimed at performing a number of simple
hard drive and file system performance tests.</description>
  <packager></packager>
  <url></url>
  <time file="1666684768" build="1666684765"/>
  <size package="61555" installed="142426" archive="143984"/>
  <location href="x86_64/bonnie++-1.97.1-7.9.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System/Benchmark</rpm:group>
    <rpm:buildhost>old-cirrus3</rpm:buildhost>
    <rpm:sourcerpm>bonnie++-1.97.1-7.9.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4016"/>
    <rpm:provides>
      <rpm:entry name="bonnie++-1.97"/>
      <rpm:entry name="bonnie++" flags="EQ" epoch="0" ver="1.97.1" rel="7.9.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/perl"/>
      <rpm:entry name="libgcc_s.so.1()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libpthread.so.0()(64bit)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libstdc++.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.2.5)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/bon_csv2html</file>
    <file>/usr/bin/bon_csv2txt</file>
    <file>/usr/bin/bonnie++</file>
    <file>/usr/bin/zcav</file>
  </format>
</package>
<package type="rpm">
  <name>cciss_vol_status</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.12a" rel="1.1"/>
  <checksum type="sha" pkgid="YES">fbad3b8a67eff42b2760aac867d965d1a9c10bf9</checksum>
  <summary>HP Smart Array Status Display</summary>
  <description>Show status of logical drives attached to HP Smart Array controllers.</description>
  <packager></packager>
  <url></url>
  <time file="1666683836" build="1666683719"/>
  <size package="47513" installed="85710" archive="86132"/>
  <location href="i586/cciss_vol_status-1.12a-1.1.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System Environment</rpm:group>
    <rpm:buildhost>hurricane3</rpm:buildhost>
    <rpm:sourcerpm>cciss_vol_status-1.12a-1.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="2217"/>
    <rpm:provides>
      <rpm:entry name="cciss_vol_status" flags="EQ" epoch="0" ver="1.12a" rel="1.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libc.so.6(GLIBC_2.3)"/>
    </rpm:requires>
    <file>/usr/sbin/cciss_vol_status</file>
  </format>
</package>
<package type="rpm">
  <name>cciss_vol_status</name>
  <arch>src</arch>
  <version epoch="0" ver="1.12a" rel="1.1"/>
  <checksum type="sha" pkgid="YES">56e91a8fc1bb986f4c6dc0289a85521521b51f1d</checksum>
  <summary>HP Smart Array Status Display</summary>
  <description>Show status of logical drives attached to HP Smart Array controllers.</description>
  <packager></packager>
  <url></url>
  <time file="1666683989" build="1666683700"/>
  <size package="123407" installed="121770" archive="122168"/>
  <location href="src/cciss_vol_status-1.12a-1.1.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System Environment</rpm:group>
    <rpm:buildhost>old-cirrus2</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="1846"/>
    <rpm:requires>
      <rpm:entry name="kernel-source"/>
      <rpm:entry name="autoconf"/>
      <rpm:entry name="automake"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>cciss_vol_status</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.12a" rel="1.1"/>
  <checksum type="sha" pkgid="YES">f8356ddd46b58083b74ea2fe84b6f44a47972ac1</checksum>
  <summary>HP Smart Array Status Display</summary>
  <description>Show status of logical drives attached to HP Smart Array controllers.</description>
  <packager></packager>
  <url></url>
  <time file="1666683989" build="1666683700"/>
  <size package="50155" installed="102600" archive="103024"/>
  <location href="x86_64/cciss_vol_status-1.12a-1.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System Environment</rpm:group>
    <rpm:buildhost>old-cirrus2</rpm:buildhost>
    <rpm:sourcerpm>cciss_vol_status-1.12a-1.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="2225"/>
    <rpm:provides>
      <rpm:entry name="cciss_vol_status" flags="EQ" epoch="0" ver="1.12a" rel="1.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libc.so.6(GLIBC_2.3)(64bit)"/>
    </rpm:requires>
    <file>/usr/sbin/cciss_vol_status</file>
  </format>
</package>
<package type="rpm">
  <name>cfengine</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.1.11" rel="55.3"/>
  <checksum type="sha" pkgid="YES">a1f3ed11c463a6a2d5696cd14be65f4866239fdd</checksum>
  <summary>A tool to maintain complicated networks</summary>
  <description>GNU cfengine is an abstract programming language for system
administrators of huge heterogeneous networks. With cfengine, system
administrators have an easy and elegant way to maintain complicated
networks.



Authors:
--------
    Mark Burgess</description>
  <packager></packager>
  <url>http://www.iu.hio.no/cfengine/</url>
  <time file="1625560289" build="1625560282"/>
  <size package="1772777" installed="4194126" archive="4203432"/>
  <location href="i586/cfengine-2.1.11-55.3.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/System</rpm:group>
    <rpm:buildhost>cloud120</rpm:buildhost>
    <rpm:sourcerpm>cfengine-2.1.11-55.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="13053"/>
    <rpm:provides>
      <rpm:entry name="cfengine" flags="EQ" epoch="0" ver="2.1.11" rel="55.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="info" pre="1"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/perl"/>
      <rpm:entry name="libcrypto.so.0.9.8"/>
      <rpm:entry name="libdb-4.3.so"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libm.so.6(GLIBC_2.0)"/>
      <rpm:entry name="libnss_nis.so.2"/>
      <rpm:entry name="libpthread.so.0"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.0)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.1)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.2)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)"/>
    </rpm:requires>
    <file>/etc/init.d/cfenvd</file>
    <file>/etc/init.d/cfexecd</file>
    <file>/etc/init.d/cfservd</file>
    <file>/usr/sbin/cfagent</file>
    <file>/usr/sbin/cfdoc</file>
    <file>/usr/sbin/cfenvd</file>
    <file>/usr/sbin/cfenvgraph</file>
    <file>/usr/sbin/cfexecd</file>
    <file>/usr/sbin/cfkey</file>
    <file>/usr/sbin/cfrun</file>
    <file>/usr/sbin/cfservd</file>
    <file>/usr/sbin/cfshow</file>
    <file>/usr/sbin/rccfexecd</file>
    <file>/usr/sbin/rccfservd</file>
    <file>/usr/sbin/vicf</file>
  </format>
</package>
<package type="rpm">
  <name>cfengine</name>
  <arch>src</arch>
  <version epoch="0" ver="2.1.11" rel="55.3"/>
  <checksum type="sha" pkgid="YES">94aa512f85b4f34092bb81f779908d08b6939b0a</checksum>
  <summary>A tool to maintain complicated networks</summary>
  <description>GNU cfengine is an abstract programming language for system
administrators of huge heterogeneous networks. With cfengine, system
administrators have an easy and elegant way to maintain complicated
networks.



Authors:
--------
    Mark Burgess</description>
  <packager></packager>
  <url>http://www.iu.hio.no/cfengine/</url>
  <time file="1625560951" build="1625560946"/>
  <size package="3133399" installed="3166235" archive="3168780"/>
  <location href="src/cfengine-2.1.11-55.3.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/System</rpm:group>
    <rpm:buildhost>goat19</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="5878"/>
    <rpm:requires>
      <rpm:entry name="bison"/>
      <rpm:entry name="db-devel"/>
      <rpm:entry name="flex"/>
      <rpm:entry name="openssl-devel"/>
      <rpm:entry name="tetex"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>cfengine</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.1.11" rel="55.3"/>
  <checksum type="sha" pkgid="YES">226aa8e1092a7d68984e99c4b8722c47a83377ae</checksum>
  <summary>A tool to maintain complicated networks</summary>
  <description>GNU cfengine is an abstract programming language for system
administrators of huge heterogeneous networks. With cfengine, system
administrators have an easy and elegant way to maintain complicated
networks.



Authors:
--------
    Mark Burgess</description>
  <packager></packager>
  <url>http://www.iu.hio.no/cfengine/</url>
  <time file="1625560951" build="1625560946"/>
  <size package="1931647" installed="4786776" archive="4796084"/>
  <location href="x86_64/cfengine-2.1.11-55.3.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/System</rpm:group>
    <rpm:buildhost>goat19</rpm:buildhost>
    <rpm:sourcerpm>cfengine-2.1.11-55.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="13009"/>
    <rpm:provides>
      <rpm:entry name="cfengine" flags="EQ" epoch="0" ver="2.1.11" rel="55.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="info" pre="1"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/perl"/>
      <rpm:entry name="libcrypto.so.0.9.8()(64bit)"/>
      <rpm:entry name="libdb-4.3.so()(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libnss_nis.so.2()(64bit)"/>
      <rpm:entry name="libpthread.so.0()(64bit)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)(64bit)"/>
    </rpm:requires>
    <file>/etc/init.d/cfenvd</file>
    <file>/etc/init.d/cfexecd</file>
    <file>/etc/init.d/cfservd</file>
    <file>/usr/sbin/cfagent</file>
    <file>/usr/sbin/cfdoc</file>
    <file>/usr/sbin/cfenvd</file>
    <file>/usr/sbin/cfenvgraph</file>
    <file>/usr/sbin/cfexecd</file>
    <file>/usr/sbin/cfkey</file>
    <file>/usr/sbin/cfrun</file>
    <file>/usr/sbin/cfservd</file>
    <file>/usr/sbin/cfshow</file>
    <file>/usr/sbin/rccfexecd</file>
    <file>/usr/sbin/rccfservd</file>
    <file>/usr/sbin/vicf</file>
  </format>
</package>
<package type="rpm">
  <name>csv2ldif</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.6" rel="33.1"/>
  <checksum type="sha" pkgid="YES">8e6f75ba25470e1015c0a7bc43b8450b646d637f</checksum>
  <summary>A tool to convert data from CSV form to LDIF form.</summary>
  <description>A tool to convert data from CSV form to LDIF form.

The program is ready to handle both attribute names and value from the CSV file.</description>
  <packager></packager>
  <url>http://csv2ldif.sourceforge.net/</url>
  <time file="1625560126" build="1625560120"/>
  <size package="7583" installed="11496" archive="11752"/>
  <location href="i586/csv2ldif-1.6-33.1.i586.rpm"/>
  <format>
    <rpm:license>GPLv2</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Engineering</rpm:group>
    <rpm:buildhost>old-atreju4</rpm:buildhost>
    <rpm:sourcerpm>csv2ldif-1.6-33.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="2266"/>
    <rpm:provides>
      <rpm:entry name="csv2ldif" flags="EQ" epoch="0" ver="1.6" rel="33.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="openssl"/>
      <rpm:entry name="pcre"/>
      <rpm:entry name="libcrypto.so.0.9.8"/>
      <rpm:entry name="libssl.so.0.9.8"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)"/>
    </rpm:requires>
    <file>/usr/bin/csv2ldif</file>
  </format>
</package>
<package type="rpm">
  <name>csv2ldif</name>
  <arch>src</arch>
  <version epoch="0" ver="1.6" rel="33.1"/>
  <checksum type="sha" pkgid="YES">ed25a76e4b3cbef10eee9887d69cfac963e22d69</checksum>
  <summary>A tool to convert data from CSV form to LDIF form.</summary>
  <description>A tool to convert data from CSV form to LDIF form.

The program is ready to handle both attribute names and value from the CSV file.</description>
  <packager></packager>
  <url>http://csv2ldif.sourceforge.net/</url>
  <time file="1625560434" build="1625560430"/>
  <size package="14268" installed="12497" archive="12880"/>
  <location href="src/csv2ldif-1.6-33.1.src.rpm"/>
  <format>
    <rpm:license>GPLv2</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Engineering</rpm:group>
    <rpm:buildhost>goat11</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="1913"/>
    <rpm:requires>
      <rpm:entry name="openssl-devel"/>
      <rpm:entry name="pcre"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>csv2ldif</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.6" rel="33.1"/>
  <checksum type="sha" pkgid="YES">b5c05405296577a56ab687b66bbedff7abb0a478</checksum>
  <summary>A tool to convert data from CSV form to LDIF form.</summary>
  <description>A tool to convert data from CSV form to LDIF form.

The program is ready to handle both attribute names and value from the CSV file.</description>
  <packager></packager>
  <url>http://csv2ldif.sourceforge.net/</url>
  <time file="1625560434" build="1625560430"/>
  <size package="7768" installed="14534" archive="14792"/>
  <location href="x86_64/csv2ldif-1.6-33.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPLv2</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Engineering</rpm:group>
    <rpm:buildhost>goat11</rpm:buildhost>
    <rpm:sourcerpm>csv2ldif-1.6-33.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="2278"/>
    <rpm:provides>
      <rpm:entry name="csv2ldif" flags="EQ" epoch="0" ver="1.6" rel="33.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="openssl"/>
      <rpm:entry name="pcre"/>
      <rpm:entry name="libcrypto.so.0.9.8()(64bit)"/>
      <rpm:entry name="libssl.so.0.9.8()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/csv2ldif</file>
  </format>
</package>
<package type="rpm">
  <name>csv2odf</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.09" rel="7.1"/>
  <checksum type="sha" pkgid="YES">a7078b0fa0b4bba617dbd3bd595b3789280bc004</checksum>
  <summary>Convert csv files to open document format</summary>
  <description>Convert a csv file to odf, ods, html, xlsx, or docx format.  csv2odf is a
command line tool that can convert a comma separated value (csv) file to an
odf, ods, html, xlsx, or docx document that can be viewed in OpenOffice.org
and other office productivity programs.  csv2odf is useful for creating
reports from databases and other data sources that produce csv files.
csv2odf can be combined with cron and shell scripts to automatically
generate business reports.  .  The output format (fonts, number formatting,
etc.) is controlled by a template file that you design in OpenOffice.org.  .
csv2odf is written in Python.

Authors:
--------
    Larry Jordan</description>
  <packager></packager>
  <url>http://csv2odf.sourceforge.net</url>
  <time file="1625560866" build="1625560860"/>
  <size package="36500" installed="134165" archive="135488"/>
  <location href="i586/csv2odf-1.09-7.1.i586.rpm"/>
  <format>
    <rpm:license>GPL v3</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Engineering</rpm:group>
    <rpm:buildhost>lamb25</rpm:buildhost>
    <rpm:sourcerpm>csv2odf-1.09-7.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="3482"/>
    <rpm:provides>
      <rpm:entry name="csv2odf" flags="EQ" epoch="0" ver="1.09" rel="7.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python-xml"/>
      <rpm:entry name="python" flags="GE" epoch="0" ver="2.4" pre="1"/>
      <rpm:entry name="python" flags="LT" epoch="0" ver="2.5" pre="1"/>
      <rpm:entry name="/usr/bin/python"/>
    </rpm:requires>
    <file>/usr/bin/csv2odf</file>
  </format>
</package>
<package type="rpm">
  <name>csv2odf</name>
  <arch>src</arch>
  <version epoch="0" ver="1.09" rel="7.1"/>
  <checksum type="sha" pkgid="YES">4bbea3d39788f2b2b1c01d148414f8378fa859bc</checksum>
  <summary>Convert csv files to open document format</summary>
  <description>Convert a csv file to odf, ods, html, xlsx, or docx format.  csv2odf is a
command line tool that can convert a comma separated value (csv) file to an
odf, ods, html, xlsx, or docx document that can be viewed in OpenOffice.org
and other office productivity programs.  csv2odf is useful for creating
reports from databases and other data sources that produce csv files.
csv2odf can be combined with cron and shell scripts to automatically
generate business reports.  .  The output format (fonts, number formatting,
etc.) is controlled by a template file that you design in OpenOffice.org.  .
csv2odf is written in Python.

Authors:
--------
    Larry Jordan</description>
  <packager></packager>
  <url>http://csv2odf.sourceforge.net</url>
  <time file="1625560580" build="1625560575"/>
  <size package="40706" installed="38545" archive="38928"/>
  <location href="src/csv2odf-1.09-7.1.src.rpm"/>
  <format>
    <rpm:license>GPL v3</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Engineering</rpm:group>
    <rpm:buildhost>goat11</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2514"/>
    <rpm:requires>
      <rpm:entry name="python-devel"/>
      <rpm:entry name="python"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>csv2odf</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.09" rel="7.1"/>
  <checksum type="sha" pkgid="YES">262393eb688938ca9628d6a498b0ecb3075ac5a9</checksum>
  <summary>Convert csv files to open document format</summary>
  <description>Convert a csv file to odf, ods, html, xlsx, or docx format.  csv2odf is a
command line tool that can convert a comma separated value (csv) file to an
odf, ods, html, xlsx, or docx document that can be viewed in OpenOffice.org
and other office productivity programs.  csv2odf is useful for creating
reports from databases and other data sources that produce csv files.
csv2odf can be combined with cron and shell scripts to automatically
generate business reports.  .  The output format (fonts, number formatting,
etc.) is controlled by a template file that you design in OpenOffice.org.  .
csv2odf is written in Python.

Authors:
--------
    Larry Jordan</description>
  <packager></packager>
  <url>http://csv2odf.sourceforge.net</url>
  <time file="1625560580" build="1625560575"/>
  <size package="36473" installed="134165" archive="135488"/>
  <location href="x86_64/csv2odf-1.09-7.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPL v3</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/Engineering</rpm:group>
    <rpm:buildhost>goat11</rpm:buildhost>
    <rpm:sourcerpm>csv2odf-1.09-7.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="3462"/>
    <rpm:provides>
      <rpm:entry name="csv2odf" flags="EQ" epoch="0" ver="1.09" rel="7.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python-xml"/>
      <rpm:entry name="python" flags="GE" epoch="0" ver="2.4" pre="1"/>
      <rpm:entry name="python" flags="LT" epoch="0" ver="2.5" pre="1"/>
      <rpm:entry name="/usr/bin/python"/>
    </rpm:requires>
    <file>/usr/bin/csv2odf</file>
  </format>
</package>
<package type="rpm">
  <name>denyhosts</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.6" rel="8.1"/>
  <checksum type="sha" pkgid="YES">ac2dd1a341c69a804d0d07b3a590061d1f857786</checksum>
  <summary>DenyHosts is a utility to help sys admins thwart ssh hackers</summary>
  <description>
DenyHosts is a python program that automatically blocks ssh attacks by adding entries to
/etc/hosts.deny. DenyHosts will also inform Linux administrators about offending hosts, attacked
users and suspicious logins.</description>
  <packager></packager>
  <url>http://denyhosts.sourceforge.net</url>
  <time file="1625560450" build="1625560445"/>
  <size package="70126" installed="259164" archive="270080"/>
  <location href="i586/denyhosts-2.6-8.1.i586.rpm"/>
  <format>
    <rpm:license>GPL v2</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Security</rpm:group>
    <rpm:buildhost>sheep85</rpm:buildhost>
    <rpm:sourcerpm>denyhosts-2.6-8.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="10825"/>
    <rpm:provides>
      <rpm:entry name="denyhosts" flags="EQ" epoch="0" ver="2.6" rel="8.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python"/>
      <rpm:entry name="logrotate"/>
      <rpm:entry name="insserv" pre="1"/>
      <rpm:entry name="sed" pre="1"/>
      <rpm:entry name="python" flags="GE" epoch="0" ver="2.4" pre="1"/>
      <rpm:entry name="python" flags="LT" epoch="0" ver="2.5" pre="1"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/python"/>
    </rpm:requires>
    <file>/etc/denyhosts.conf</file>
    <file>/etc/init.d/denyhosts</file>
    <file>/etc/logrotate.d/denyhosts</file>
    <file>/usr/sbin/denyhosts</file>
    <file>/usr/sbin/dh_reenable</file>
    <file>/usr/sbin/rcdenyhosts</file>
  </format>
</package>
<package type="rpm">
  <name>denyhosts</name>
  <arch>src</arch>
  <version epoch="0" ver="2.6" rel="8.1"/>
  <checksum type="sha" pkgid="YES">5170df5b24bdb97fc5246cb54e5ce50d9ed4b419</checksum>
  <summary>DenyHosts is a utility to help sys admins thwart ssh hackers</summary>
  <description>
DenyHosts is a python program that automatically blocks ssh attacks by adding entries to
/etc/hosts.deny. DenyHosts will also inform Linux administrators about offending hosts, attacked
users and suspicious logins.</description>
  <packager></packager>
  <url>http://denyhosts.sourceforge.net</url>
  <time file="1625560304" build="1625560300"/>
  <size package="53864" installed="77368" archive="79448"/>
  <location href="src/denyhosts-2.6-8.1.src.rpm"/>
  <format>
    <rpm:license>GPL v2</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Security</rpm:group>
    <rpm:buildhost>goat19</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="4120"/>
    <rpm:requires>
      <rpm:entry name="python-devel"/>
      <rpm:entry name="perl"/>
      <rpm:entry name="python"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>denyhosts</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.6" rel="8.1"/>
  <checksum type="sha" pkgid="YES">9aebe968fd141d174afea1696781e33da0c3ef9f</checksum>
  <summary>DenyHosts is a utility to help sys admins thwart ssh hackers</summary>
  <description>
DenyHosts is a python program that automatically blocks ssh attacks by adding entries to
/etc/hosts.deny. DenyHosts will also inform Linux administrators about offending hosts, attacked
users and suspicious logins.</description>
  <packager></packager>
  <url>http://denyhosts.sourceforge.net</url>
  <time file="1625560305" build="1625560300"/>
  <size package="70157" installed="259206" archive="270208"/>
  <location href="x86_64/denyhosts-2.6-8.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPL v2</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Security</rpm:group>
    <rpm:buildhost>goat19</rpm:buildhost>
    <rpm:sourcerpm>denyhosts-2.6-8.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="10813"/>
    <rpm:provides>
      <rpm:entry name="denyhosts" flags="EQ" epoch="0" ver="2.6" rel="8.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python"/>
      <rpm:entry name="logrotate"/>
      <rpm:entry name="insserv" pre="1"/>
      <rpm:entry name="sed" pre="1"/>
      <rpm:entry name="python" flags="GE" epoch="0" ver="2.4" pre="1"/>
      <rpm:entry name="python" flags="LT" epoch="0" ver="2.5" pre="1"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/python"/>
    </rpm:requires>
    <file>/etc/denyhosts.conf</file>
    <file>/etc/init.d/denyhosts</file>
    <file>/etc/logrotate.d/denyhosts</file>
    <file>/usr/sbin/denyhosts</file>
    <file>/usr/sbin/dh_reenable</file>
    <file>/usr/sbin/rcdenyhosts</file>
  </format>
</package>
<package type="rpm">
  <name>gpg-offline</name>
  <arch>noarch</arch>
  <version epoch="0" ver="0.1" rel="2.1"/>
  <checksum type="sha" pkgid="YES">16fc28bf1cc4f1ec001051ad4c1a0dd7ce3ce00d</checksum>
  <summary>Trusted GPG Offline Keyring Manipulation Tool</summary>
  <description>A tool to manipulate with locally stored keyrings.

Package sources can contain keyrings with keys used by upstream
developers for signing of their project tarballs. Keys can be verified
offline during building process.

Package includes RPM macros for build-time offline verification of
upstream tarballs during build.</description>
  <packager></packager>
  <url></url>
  <time file="1625560730" build="1625560725"/>
  <size package="19281" installed="44790" archive="45808"/>
  <location href="noarch/gpg-offline-0.1-2.1.noarch.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Hardware/Other</rpm:group>
    <rpm:buildhost>lamb09</rpm:buildhost>
    <rpm:sourcerpm>gpg-offline-0.1-2.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="3316"/>
    <rpm:provides>
      <rpm:entry name="gpg-offline" flags="EQ" epoch="0" ver="0.1" rel="2.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="diffutils"/>
      <rpm:entry name="gpg2"/>
      <rpm:entry name="/bin/bash"/>
    </rpm:requires>
    <file>/etc/rpm/macros.gpg-offline</file>
    <file>/usr/bin/gpg-offline</file>
  </format>
</package>
<package type="rpm">
  <name>gpg-offline</name>
  <arch>src</arch>
  <version epoch="0" ver="0.1" rel="2.1"/>
  <checksum type="sha" pkgid="YES">cd0b4d0cceb1ff1906a32a812461e75c8529bd84</checksum>
  <summary>Trusted GPG Offline Keyring Manipulation Tool</summary>
  <description>A tool to manipulate with locally stored keyrings.

Package sources can contain keyrings with keys used by upstream
developers for signing of their project tarballs. Keys can be verified
offline during building process.

Package includes RPM macros for build-time offline verification of
upstream tarballs during build.</description>
  <packager></packager>
  <url></url>
  <time file="1625560730" build="1625560725"/>
  <size package="21700" installed="57177" archive="58224"/>
  <location href="src/gpg-offline-0.1-2.1.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Hardware/Other</rpm:group>
    <rpm:buildhost>lamb09</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="3150"/>
    <rpm:requires>
      <rpm:entry name="gpg2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>havp</name>
  <arch>i586</arch>
  <version epoch="0" ver="0.92a" rel="27.20"/>
  <checksum type="sha" pkgid="YES">06df56a1f270d3879b9481d4d3a1ba82a958827d</checksum>
  <summary>HTTP Anti Virus Proxy</summary>
  <description>HAVP (HTTP Anti Virus Proxy) is a virus filtering http proxy which
uses clamav as its scan engine



Authors:
--------
    Christian Hilgers &lt;christian@hilgers.ag&gt;</description>
  <packager>danny</packager>
  <url>http://www.server-side.de/</url>
  <time file="1398254777" build="1398254762"/>
  <size package="712299" installed="2033314" archive="2053608"/>
  <location href="i586/havp-0.92a-27.20.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Security</rpm:group>
    <rpm:buildhost>build16</rpm:buildhost>
    <rpm:sourcerpm>havp-0.92a-27.20.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="14669"/>
    <rpm:provides>
      <rpm:entry name="havp" flags="EQ" epoch="0" ver="0.92a" rel="27.20"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libstdc++.so.6"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libclamav.so.6(CLAMAV_PUBLIC)"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)"/>
      <rpm:entry name="libgcc_s.so.1(GLIBC_2.0)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)"/>
      <rpm:entry name="libclamav.so.6"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.1.3)"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="clamav" flags="GT" epoch="0" ver="0.94"/>
    </rpm:requires>
    <file>/etc/havp/blacklist</file>
    <file>/etc/havp/havp.config</file>
    <file>/etc/havp/havp.config.default</file>
    <file>/etc/havp/templates/br/blacklist.html</file>
    <file>/etc/havp/templates/br/dns.html</file>
    <file>/etc/havp/templates/br/down.html</file>
    <file>/etc/havp/templates/br/error.html</file>
    <file>/etc/havp/templates/br/invalid.html</file>
    <file>/etc/havp/templates/br/maxsize.html</file>
    <file>/etc/havp/templates/br/request.html</file>
    <file>/etc/havp/templates/br/scanner.html</file>
    <file>/etc/havp/templates/br/virus.html</file>
    <file>/etc/havp/templates/css2/havp.css</file>
    <file>/etc/havp/templates/de/blacklist.html</file>
    <file>/etc/havp/templates/de/dns.html</file>
    <file>/etc/havp/templates/de/down.html</file>
    <file>/etc/havp/templates/de/error.html</file>
    <file>/etc/havp/templates/de/invalid.html</file>
    <file>/etc/havp/templates/de/maxsize.html</file>
    <file>/etc/havp/templates/de/request.html</file>
    <file>/etc/havp/templates/de/scanner.html</file>
    <file>/etc/havp/templates/de/virus.html</file>
    <file>/etc/havp/templates/en/blacklist.html</file>
    <file>/etc/havp/templates/en/dns.html</file>
    <file>/etc/havp/templates/en/down.html</file>
    <file>/etc/havp/templates/en/error.html</file>
    <file>/etc/havp/templates/en/invalid.html</file>
    <file>/etc/havp/templates/en/maxsize.html</file>
    <file>/etc/havp/templates/en/request.html</file>
    <file>/etc/havp/templates/en/scanner.html</file>
    <file>/etc/havp/templates/en/virus.html</file>
    <file>/etc/havp/templates/es/blacklist.html</file>
    <file>/etc/havp/templates/es/dns.html</file>
    <file>/etc/havp/templates/es/down.html</file>
    <file>/etc/havp/templates/es/error.html</file>
    <file>/etc/havp/templates/es/invalid.html</file>
    <file>/etc/havp/templates/es/maxsize.html</file>
    <file>/etc/havp/templates/es/request.html</file>
    <file>/etc/havp/templates/es/scanner.html</file>
    <file>/etc/havp/templates/es/virus.html</file>
    <file>/etc/havp/templates/fr/blacklist.html</file>
    <file>/etc/havp/templates/fr/dns.html</file>
    <file>/etc/havp/templates/fr/down.html</file>
    <file>/etc/havp/templates/fr/error.html</file>
    <file>/etc/havp/templates/fr/invalid.html</file>
    <file>/etc/havp/templates/fr/maxsize.html</file>
    <file>/etc/havp/templates/fr/request.html</file>
    <file>/etc/havp/templates/fr/scanner.html</file>
    <file>/etc/havp/templates/fr/virus.html</file>
    <file>/etc/havp/templates/it/blacklist.html</file>
    <file>/etc/havp/templates/it/dns.html</file>
    <file>/etc/havp/templates/it/down.html</file>
    <file>/etc/havp/templates/it/error.html</file>
    <file>/etc/havp/templates/it/invalid.html</file>
    <file>/etc/havp/templates/it/maxsize.html</file>
    <file>/etc/havp/templates/it/request.html</file>
    <file>/etc/havp/templates/it/scanner.html</file>
    <file>/etc/havp/templates/it/virus.html</file>
    <file>/etc/havp/templates/nl/blacklist.html</file>
    <file>/etc/havp/templates/nl/dns.html</file>
    <file>/etc/havp/templates/nl/down.html</file>
    <file>/etc/havp/templates/nl/error.html</file>
    <file>/etc/havp/templates/nl/invalid.html</file>
    <file>/etc/havp/templates/nl/maxsize.html</file>
    <file>/etc/havp/templates/nl/request.html</file>
    <file>/etc/havp/templates/nl/scanner.html</file>
    <file>/etc/havp/templates/nl/virus.html</file>
    <file>/etc/havp/templates/pf/blacklist.html</file>
    <file>/etc/havp/templates/pf/dns.html</file>
    <file>/etc/havp/templates/pf/down.html</file>
    <file>/etc/havp/templates/pf/error.html</file>
    <file>/etc/havp/templates/pf/invalid.html</file>
    <file>/etc/havp/templates/pf/maxsize.html</file>
    <file>/etc/havp/templates/pf/request.html</file>
    <file>/etc/havp/templates/pf/scanner.html</file>
    <file>/etc/havp/templates/pf/virus.html</file>
    <file>/etc/havp/templates/pl/blacklist.html</file>
    <file>/etc/havp/templates/pl/dns.html</file>
    <file>/etc/havp/templates/pl/down.html</file>
    <file>/etc/havp/templates/pl/error.html</file>
    <file>/etc/havp/templates/pl/invalid.html</file>
    <file>/etc/havp/templates/pl/maxsize.html</file>
    <file>/etc/havp/templates/pl/request.html</file>
    <file>/etc/havp/templates/pl/scanner.html</file>
    <file>/etc/havp/templates/pl/virus.html</file>
    <file>/etc/havp/templates/ru/blacklist.html</file>
    <file>/etc/havp/templates/ru/dns.html</file>
    <file>/etc/havp/templates/ru/down.html</file>
    <file>/etc/havp/templates/ru/error.html</file>
    <file>/etc/havp/templates/ru/invalid.html</file>
    <file>/etc/havp/templates/ru/maxsize.html</file>
    <file>/etc/havp/templates/ru/request.html</file>
    <file>/etc/havp/templates/ru/scanner.html</file>
    <file>/etc/havp/templates/ru/virus.html</file>
    <file>/etc/havp/templates/si/blacklist.html</file>
    <file>/etc/havp/templates/si/dns.html</file>
    <file>/etc/havp/templates/si/down.html</file>
    <file>/etc/havp/templates/si/error.html</file>
    <file>/etc/havp/templates/si/invalid.html</file>
    <file>/etc/havp/templates/si/maxsize.html</file>
    <file>/etc/havp/templates/si/request.html</file>
    <file>/etc/havp/templates/si/scanner.html</file>
    <file>/etc/havp/templates/si/virus.html</file>
    <file>/etc/havp/templates/sv/blacklist.html</file>
    <file>/etc/havp/templates/sv/dns.html</file>
    <file>/etc/havp/templates/sv/down.html</file>
    <file>/etc/havp/templates/sv/error.html</file>
    <file>/etc/havp/templates/sv/invalid.html</file>
    <file>/etc/havp/templates/sv/maxsize.html</file>
    <file>/etc/havp/templates/sv/request.html</file>
    <file>/etc/havp/templates/sv/scanner.html</file>
    <file>/etc/havp/templates/sv/virus.html</file>
    <file>/etc/havp/whitelist</file>
    <file>/etc/init.d/havp</file>
    <file>/usr/sbin/havp</file>
    <file>/usr/sbin/rchavp</file>
    <file type="dir">/etc/havp</file>
    <file type="dir">/etc/havp/templates</file>
    <file type="dir">/etc/havp/templates/br</file>
    <file type="dir">/etc/havp/templates/css2</file>
    <file type="dir">/etc/havp/templates/de</file>
    <file type="dir">/etc/havp/templates/en</file>
    <file type="dir">/etc/havp/templates/es</file>
    <file type="dir">/etc/havp/templates/fr</file>
    <file type="dir">/etc/havp/templates/it</file>
    <file type="dir">/etc/havp/templates/nl</file>
    <file type="dir">/etc/havp/templates/pf</file>
    <file type="dir">/etc/havp/templates/pl</file>
    <file type="dir">/etc/havp/templates/ru</file>
    <file type="dir">/etc/havp/templates/si</file>
    <file type="dir">/etc/havp/templates/sv</file>
  </format>
</package>
<package type="rpm">
  <name>havp</name>
  <arch>src</arch>
  <version epoch="0" ver="0.92a" rel="27.20"/>
  <checksum type="sha" pkgid="YES">12f95c0a80cd260fd523c292703ebdd2dba9ca71</checksum>
  <summary>HTTP Anti Virus Proxy</summary>
  <description>HAVP (HTTP Anti Virus Proxy) is a virus filtering http proxy which
uses clamav as its scan engine



Authors:
--------
    Christian Hilgers &lt;christian@hilgers.ag&gt;</description>
  <packager>danny</packager>
  <url>http://www.server-side.de/</url>
  <time file="1398254777" build="1398254762"/>
  <size package="135626" installed="144252" archive="145436"/>
  <location href="src/havp-0.92a-27.20.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Security</rpm:group>
    <rpm:buildhost>build16</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2756"/>
    <rpm:requires>
      <rpm:entry name="gcc-c++"/>
      <rpm:entry name="gcc"/>
      <rpm:entry name="clamav" flags="GT" epoch="0" ver="0.94"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>havp</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="0.92a" rel="27.20"/>
  <checksum type="sha" pkgid="YES">fa2cc85df91841545773839b5c11a89909be7de7</checksum>
  <summary>HTTP Anti Virus Proxy</summary>
  <description>HAVP (HTTP Anti Virus Proxy) is a virus filtering http proxy which
uses clamav as its scan engine



Authors:
--------
    Christian Hilgers &lt;christian@hilgers.ag&gt;</description>
  <packager>danny</packager>
  <url>http://www.server-side.de/</url>
  <time file="1398254978" build="1398254952"/>
  <size package="710686" installed="2334862" archive="2355156"/>
  <location href="x86_64/havp-0.92a-27.20.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Security</rpm:group>
    <rpm:buildhost>cloud118</rpm:buildhost>
    <rpm:sourcerpm>havp-0.92a-27.20.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="14677"/>
    <rpm:provides>
      <rpm:entry name="havp" flags="EQ" epoch="0" ver="0.92a" rel="27.20"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libclamav.so.6()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1()(64bit)"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libstdc++.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)(64bit)"/>
      <rpm:entry name="libclamav.so.6(CLAMAV_PUBLIC)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)(64bit)"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="clamav" flags="GT" epoch="0" ver="0.94"/>
      <rpm:entry name="libc.so.6(GLIBC_2.2.5)(64bit)"/>
    </rpm:requires>
    <file>/etc/havp/blacklist</file>
    <file>/etc/havp/havp.config</file>
    <file>/etc/havp/havp.config.default</file>
    <file>/etc/havp/templates/br/blacklist.html</file>
    <file>/etc/havp/templates/br/dns.html</file>
    <file>/etc/havp/templates/br/down.html</file>
    <file>/etc/havp/templates/br/error.html</file>
    <file>/etc/havp/templates/br/invalid.html</file>
    <file>/etc/havp/templates/br/maxsize.html</file>
    <file>/etc/havp/templates/br/request.html</file>
    <file>/etc/havp/templates/br/scanner.html</file>
    <file>/etc/havp/templates/br/virus.html</file>
    <file>/etc/havp/templates/css2/havp.css</file>
    <file>/etc/havp/templates/de/blacklist.html</file>
    <file>/etc/havp/templates/de/dns.html</file>
    <file>/etc/havp/templates/de/down.html</file>
    <file>/etc/havp/templates/de/error.html</file>
    <file>/etc/havp/templates/de/invalid.html</file>
    <file>/etc/havp/templates/de/maxsize.html</file>
    <file>/etc/havp/templates/de/request.html</file>
    <file>/etc/havp/templates/de/scanner.html</file>
    <file>/etc/havp/templates/de/virus.html</file>
    <file>/etc/havp/templates/en/blacklist.html</file>
    <file>/etc/havp/templates/en/dns.html</file>
    <file>/etc/havp/templates/en/down.html</file>
    <file>/etc/havp/templates/en/error.html</file>
    <file>/etc/havp/templates/en/invalid.html</file>
    <file>/etc/havp/templates/en/maxsize.html</file>
    <file>/etc/havp/templates/en/request.html</file>
    <file>/etc/havp/templates/en/scanner.html</file>
    <file>/etc/havp/templates/en/virus.html</file>
    <file>/etc/havp/templates/es/blacklist.html</file>
    <file>/etc/havp/templates/es/dns.html</file>
    <file>/etc/havp/templates/es/down.html</file>
    <file>/etc/havp/templates/es/error.html</file>
    <file>/etc/havp/templates/es/invalid.html</file>
    <file>/etc/havp/templates/es/maxsize.html</file>
    <file>/etc/havp/templates/es/request.html</file>
    <file>/etc/havp/templates/es/scanner.html</file>
    <file>/etc/havp/templates/es/virus.html</file>
    <file>/etc/havp/templates/fr/blacklist.html</file>
    <file>/etc/havp/templates/fr/dns.html</file>
    <file>/etc/havp/templates/fr/down.html</file>
    <file>/etc/havp/templates/fr/error.html</file>
    <file>/etc/havp/templates/fr/invalid.html</file>
    <file>/etc/havp/templates/fr/maxsize.html</file>
    <file>/etc/havp/templates/fr/request.html</file>
    <file>/etc/havp/templates/fr/scanner.html</file>
    <file>/etc/havp/templates/fr/virus.html</file>
    <file>/etc/havp/templates/it/blacklist.html</file>
    <file>/etc/havp/templates/it/dns.html</file>
    <file>/etc/havp/templates/it/down.html</file>
    <file>/etc/havp/templates/it/error.html</file>
    <file>/etc/havp/templates/it/invalid.html</file>
    <file>/etc/havp/templates/it/maxsize.html</file>
    <file>/etc/havp/templates/it/request.html</file>
    <file>/etc/havp/templates/it/scanner.html</file>
    <file>/etc/havp/templates/it/virus.html</file>
    <file>/etc/havp/templates/nl/blacklist.html</file>
    <file>/etc/havp/templates/nl/dns.html</file>
    <file>/etc/havp/templates/nl/down.html</file>
    <file>/etc/havp/templates/nl/error.html</file>
    <file>/etc/havp/templates/nl/invalid.html</file>
    <file>/etc/havp/templates/nl/maxsize.html</file>
    <file>/etc/havp/templates/nl/request.html</file>
    <file>/etc/havp/templates/nl/scanner.html</file>
    <file>/etc/havp/templates/nl/virus.html</file>
    <file>/etc/havp/templates/pf/blacklist.html</file>
    <file>/etc/havp/templates/pf/dns.html</file>
    <file>/etc/havp/templates/pf/down.html</file>
    <file>/etc/havp/templates/pf/error.html</file>
    <file>/etc/havp/templates/pf/invalid.html</file>
    <file>/etc/havp/templates/pf/maxsize.html</file>
    <file>/etc/havp/templates/pf/request.html</file>
    <file>/etc/havp/templates/pf/scanner.html</file>
    <file>/etc/havp/templates/pf/virus.html</file>
    <file>/etc/havp/templates/pl/blacklist.html</file>
    <file>/etc/havp/templates/pl/dns.html</file>
    <file>/etc/havp/templates/pl/down.html</file>
    <file>/etc/havp/templates/pl/error.html</file>
    <file>/etc/havp/templates/pl/invalid.html</file>
    <file>/etc/havp/templates/pl/maxsize.html</file>
    <file>/etc/havp/templates/pl/request.html</file>
    <file>/etc/havp/templates/pl/scanner.html</file>
    <file>/etc/havp/templates/pl/virus.html</file>
    <file>/etc/havp/templates/ru/blacklist.html</file>
    <file>/etc/havp/templates/ru/dns.html</file>
    <file>/etc/havp/templates/ru/down.html</file>
    <file>/etc/havp/templates/ru/error.html</file>
    <file>/etc/havp/templates/ru/invalid.html</file>
    <file>/etc/havp/templates/ru/maxsize.html</file>
    <file>/etc/havp/templates/ru/request.html</file>
    <file>/etc/havp/templates/ru/scanner.html</file>
    <file>/etc/havp/templates/ru/virus.html</file>
    <file>/etc/havp/templates/si/blacklist.html</file>
    <file>/etc/havp/templates/si/dns.html</file>
    <file>/etc/havp/templates/si/down.html</file>
    <file>/etc/havp/templates/si/error.html</file>
    <file>/etc/havp/templates/si/invalid.html</file>
    <file>/etc/havp/templates/si/maxsize.html</file>
    <file>/etc/havp/templates/si/request.html</file>
    <file>/etc/havp/templates/si/scanner.html</file>
    <file>/etc/havp/templates/si/virus.html</file>
    <file>/etc/havp/templates/sv/blacklist.html</file>
    <file>/etc/havp/templates/sv/dns.html</file>
    <file>/etc/havp/templates/sv/down.html</file>
    <file>/etc/havp/templates/sv/error.html</file>
    <file>/etc/havp/templates/sv/invalid.html</file>
    <file>/etc/havp/templates/sv/maxsize.html</file>
    <file>/etc/havp/templates/sv/request.html</file>
    <file>/etc/havp/templates/sv/scanner.html</file>
    <file>/etc/havp/templates/sv/virus.html</file>
    <file>/etc/havp/whitelist</file>
    <file>/etc/init.d/havp</file>
    <file>/usr/sbin/havp</file>
    <file>/usr/sbin/rchavp</file>
    <file type="dir">/etc/havp</file>
    <file type="dir">/etc/havp/templates</file>
    <file type="dir">/etc/havp/templates/br</file>
    <file type="dir">/etc/havp/templates/css2</file>
    <file type="dir">/etc/havp/templates/de</file>
    <file type="dir">/etc/havp/templates/en</file>
    <file type="dir">/etc/havp/templates/es</file>
    <file type="dir">/etc/havp/templates/fr</file>
    <file type="dir">/etc/havp/templates/it</file>
    <file type="dir">/etc/havp/templates/nl</file>
    <file type="dir">/etc/havp/templates/pf</file>
    <file type="dir">/etc/havp/templates/pl</file>
    <file type="dir">/etc/havp/templates/ru</file>
    <file type="dir">/etc/havp/templates/si</file>
    <file type="dir">/etc/havp/templates/sv</file>
  </format>
</package>
<package type="rpm">
  <name>iptables-init</name>
  <arch>noarch</arch>
  <version epoch="0" ver="0.2" rel="4.1"/>
  <checksum type="sha" pkgid="YES">4eab0db5136f19fcdba14b8d0f395e06b700e6ed</checksum>
  <summary>A simple script to manage iptables rules from a save file</summary>
  <description>A simple script and unit file to manage iptables rules from a save file.</description>
  <packager></packager>
  <url>http://www.netfilter.org/</url>
  <time file="1625560923" build="1625560919"/>
  <size package="9260" installed="3226" archive="4200"/>
  <location href="noarch/iptables-init-0.2-4.1.noarch.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System Environment/Security</rpm:group>
    <rpm:buildhost>cloud102</rpm:buildhost>
    <rpm:sourcerpm>iptables-init-0.2-4.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="7593"/>
    <rpm:provides>
      <rpm:entry name="iptables-init" flags="EQ" epoch="0" ver="0.2" rel="4.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="insserv" pre="1"/>
      <rpm:entry name="sed" pre="1"/>
      <rpm:entry name="fillup" pre="1"/>
      <rpm:entry name="coreutils" pre="1"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/bash"/>
    </rpm:requires>
    <file>/etc/init.d/iptables</file>
    <file type="dir">/etc/iptables</file>
    <file>/etc/iptables/rules-save</file>
    <file>/usr/sbin/rciptables</file>
  </format>
</package>
<package type="rpm">
  <name>iptables-init</name>
  <arch>src</arch>
  <version epoch="0" ver="0.2" rel="4.1"/>
  <checksum type="sha" pkgid="YES">c178b30da061e544a60866f882f3da76251f3240</checksum>
  <summary>A simple script to manage iptables rules from a save file</summary>
  <description>A simple script and unit file to manage iptables rules from a save file.</description>
  <packager></packager>
  <url>http://www.netfilter.org/</url>
  <time file="1625560923" build="1625560919"/>
  <size package="4715" installed="6080" archive="6852"/>
  <location href="src/iptables-init-0.2-4.1.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System Environment/Security</rpm:group>
    <rpm:buildhost>cloud102</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2311"/>
  </format>
</package>
<package type="rpm">
  <name>l2tpd</name>
  <arch>i586</arch>
  <version epoch="0" ver="0.69" rel="17.2"/>
  <checksum type="sha" pkgid="YES">7b0f9dac8bb24433b125841f2043a13cc14ddc46</checksum>
  <summary>Layer 2 Tunnelling Protocol Daemon (RFC 2661)</summary>
  <description>l2tpd is an implementation of the Layer 2 Tunnelling Protocol (RFC 2661).
L2TP allows you to tunnel PPP over UDP. Some ISPs use L2TP to tunnel user
sessions from dial-in servers (modem banks, ADSL DSLAMs) to back-end PPP
servers. Another important application is Virtual Private Networks where
the IPsec protocol is used to secure the L2TP connection (L2TP/IPsec,
RFC 3193). The L2TP/IPsec protocol is mainly used by Windows and
Mac OS X clients. On Linux, l2tpd can be used in combination with IPsec
implementations such as FreeS/WAN, Openswan, Strongswan and KAME.
Example configuration files for such a setup are included in this RPM.

l2tpd works by opening a pseudo-tty for communicating with pppd.
It runs completely in userspace.

Based on the Mandrake RPM by Lenny Cartier &lt;lenny@mandrakesoft.com&gt;
and Per yvind Karlsen &lt;peroyvind@delonic.no&gt;</description>
  <packager>Jacco de Leeuw &lt;jacco2@dds.nl&gt;</packager>
  <url>http://l2tpd.sourceforge.net</url>
  <time file="1625560470" build="1625560464"/>
  <size package="176439" installed="468127" archive="472008"/>
  <location href="i586/l2tpd-0.69-17.2.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>Damion de Soto &lt;damion@snapgear.com&gt;</rpm:vendor>
    <rpm:group>System/Servers</rpm:group>
    <rpm:buildhost>goat15</rpm:buildhost>
    <rpm:sourcerpm>l2tpd-0.69-17.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="12914"/>
    <rpm:provides>
      <rpm:entry name="l2tpd" flags="EQ" epoch="0" ver="0.69" rel="17.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="ppp"/>
      <rpm:entry name="aaa_base"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
    <file>/etc/init.d/l2tpd</file>
    <file type="dir">/etc/ipsec.d</file>
    <file>/etc/ipsec.d/L2TP-CERT-orgWIN2KXP.conf</file>
    <file>/etc/ipsec.d/L2TP-CERT.conf</file>
    <file>/etc/ipsec.d/L2TP-PSK-orgWIN2KXP.conf</file>
    <file>/etc/ipsec.d/L2TP-PSK.conf</file>
    <file type="dir">/etc/l2tpd</file>
    <file>/etc/l2tpd/l2tp-secrets</file>
    <file>/etc/l2tpd/l2tpd.conf</file>
    <file>/etc/l2tpd/l2tpd.conf.sample</file>
    <file>/etc/ppp/chap-secrets.sample</file>
    <file>/etc/ppp/options.l2tpd</file>
    <file>/usr/sbin/l2tpd</file>
    <file>/usr/sbin/rcl2tpd</file>
  </format>
</package>
<package type="rpm">
  <name>l2tpd</name>
  <arch>src</arch>
  <version epoch="0" ver="0.69" rel="17.2"/>
  <checksum type="sha" pkgid="YES">e9aea56461a98f705c3bd050f399ea133a150b20</checksum>
  <summary>Layer 2 Tunnelling Protocol Daemon (RFC 2661)</summary>
  <description>l2tpd is an implementation of the Layer 2 Tunnelling Protocol (RFC 2661).
L2TP allows you to tunnel PPP over UDP. Some ISPs use L2TP to tunnel user
sessions from dial-in servers (modem banks, ADSL DSLAMs) to back-end PPP
servers. Another important application is Virtual Private Networks where
the IPsec protocol is used to secure the L2TP connection (L2TP/IPsec,
RFC 3193). The L2TP/IPsec protocol is mainly used by Windows and
Mac OS X clients. On Linux, l2tpd can be used in combination with IPsec
implementations such as FreeS/WAN, Openswan, Strongswan and KAME.
Example configuration files for such a setup are included in this RPM.

l2tpd works by opening a pseudo-tty for communicating with pppd.
It runs completely in userspace.

Based on the Mandrake RPM by Lenny Cartier &lt;lenny@mandrakesoft.com&gt;
and Per yvind Karlsen &lt;peroyvind@delonic.no&gt;</description>
  <packager>Jacco de Leeuw &lt;jacco2@dds.nl&gt;</packager>
  <url>http://l2tpd.sourceforge.net</url>
  <time file="1625560224" build="1625560219"/>
  <size package="182499" installed="289144" archive="293208"/>
  <location href="src/l2tpd-0.69-17.2.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>Damion de Soto &lt;damion@snapgear.com&gt;</rpm:vendor>
    <rpm:group>System/Servers</rpm:group>
    <rpm:buildhost>sheep85</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="11900"/>
  </format>
</package>
<package type="rpm">
  <name>l2tpd</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="0.69" rel="17.2"/>
  <checksum type="sha" pkgid="YES">eb73d32606d943e4fb521ae29149d3bd0545d719</checksum>
  <summary>Layer 2 Tunnelling Protocol Daemon (RFC 2661)</summary>
  <description>l2tpd is an implementation of the Layer 2 Tunnelling Protocol (RFC 2661).
L2TP allows you to tunnel PPP over UDP. Some ISPs use L2TP to tunnel user
sessions from dial-in servers (modem banks, ADSL DSLAMs) to back-end PPP
servers. Another important application is Virtual Private Networks where
the IPsec protocol is used to secure the L2TP connection (L2TP/IPsec,
RFC 3193). The L2TP/IPsec protocol is mainly used by Windows and
Mac OS X clients. On Linux, l2tpd can be used in combination with IPsec
implementations such as FreeS/WAN, Openswan, Strongswan and KAME.
Example configuration files for such a setup are included in this RPM.

l2tpd works by opening a pseudo-tty for communicating with pppd.
It runs completely in userspace.

Based on the Mandrake RPM by Lenny Cartier &lt;lenny@mandrakesoft.com&gt;
and Per yvind Karlsen &lt;peroyvind@delonic.no&gt;</description>
  <packager>Jacco de Leeuw &lt;jacco2@dds.nl&gt;</packager>
  <url>http://l2tpd.sourceforge.net</url>
  <time file="1625560224" build="1625560219"/>
  <size package="184762" installed="522683" archive="526564"/>
  <location href="x86_64/l2tpd-0.69-17.2.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>Damion de Soto &lt;damion@snapgear.com&gt;</rpm:vendor>
    <rpm:group>System/Servers</rpm:group>
    <rpm:buildhost>sheep85</rpm:buildhost>
    <rpm:sourcerpm>l2tpd-0.69-17.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="12898"/>
    <rpm:provides>
      <rpm:entry name="l2tpd" flags="EQ" epoch="0" ver="0.69" rel="17.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="ppp"/>
      <rpm:entry name="aaa_base"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)(64bit)"/>
    </rpm:requires>
    <file>/etc/init.d/l2tpd</file>
    <file type="dir">/etc/ipsec.d</file>
    <file>/etc/ipsec.d/L2TP-CERT-orgWIN2KXP.conf</file>
    <file>/etc/ipsec.d/L2TP-CERT.conf</file>
    <file>/etc/ipsec.d/L2TP-PSK-orgWIN2KXP.conf</file>
    <file>/etc/ipsec.d/L2TP-PSK.conf</file>
    <file type="dir">/etc/l2tpd</file>
    <file>/etc/l2tpd/l2tp-secrets</file>
    <file>/etc/l2tpd/l2tpd.conf</file>
    <file>/etc/l2tpd/l2tpd.conf.sample</file>
    <file>/etc/ppp/chap-secrets.sample</file>
    <file>/etc/ppp/options.l2tpd</file>
    <file>/usr/sbin/l2tpd</file>
    <file>/usr/sbin/rcl2tpd</file>
  </format>
</package>
<package type="rpm">
  <name>librsync</name>
  <arch>i586</arch>
  <version epoch="0" ver="0.9.7" rel="181.2"/>
  <checksum type="sha" pkgid="YES">3456a9f6c794640bbcdcb6ec86342455fdab75e6</checksum>
  <summary>A Library for Generating Network Deltas</summary>
  <description>librsync implements the "rsync" algorithm, which allows remote
differencing of binary files.  librsync computes a delta relative to a
file's checksum, so the two files need not both be present to generate
a delta.



Authors:
--------
    Martin Pool &lt;mbp@samba.org&gt;
    Andrew Tridgell &lt;tridge@samba.org&gt;
    Donovan Baarda &lt;abo@minkirri.apana.org.au&gt;</description>
  <packager></packager>
  <url>http://librsync.sourceforge.net/</url>
  <time file="1625560144" build="1625560139"/>
  <size package="58359" installed="139801" archive="142144"/>
  <location href="i586/librsync-0.9.7-181.2.i586.rpm"/>
  <format>
    <rpm:license>LGPL v2.1 or later</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>goat17</rpm:buildhost>
    <rpm:sourcerpm>librsync-0.9.7-181.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5430"/>
    <rpm:provides>
      <rpm:entry name="librsync.so.1"/>
      <rpm:entry name="librsync" flags="EQ" epoch="0" ver="0.9.7" rel="181.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="libbz2.so.1"/>
      <rpm:entry name="libpopt.so.0"/>
      <rpm:entry name="libz.so.1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)"/>
    </rpm:requires>
    <file>/usr/bin/rdiff</file>
  </format>
</package>
<package type="rpm">
  <name>librsync</name>
  <arch>src</arch>
  <version epoch="0" ver="0.9.7" rel="181.2"/>
  <checksum type="sha" pkgid="YES">7f110cb3db300424a27d05e8ca1a2b6b012aa27e</checksum>
  <summary>A Library for Generating Network Deltas</summary>
  <description>librsync implements the "rsync" algorithm, which allows remote
differencing of binary files.  librsync computes a delta relative to a
file's checksum, so the two files need not both be present to generate
a delta.



Authors:
--------
    Martin Pool &lt;mbp@samba.org&gt;
    Andrew Tridgell &lt;tridge@samba.org&gt;
    Donovan Baarda &lt;abo@minkirri.apana.org.au&gt;</description>
  <packager></packager>
  <url>http://librsync.sourceforge.net/</url>
  <time file="1625560158" build="1625560153"/>
  <size package="346749" installed="347423" archive="348104"/>
  <location href="src/librsync-0.9.7-181.2.src.rpm"/>
  <format>
    <rpm:license>LGPL v2.1 or later</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>hci-cnode1-e5</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="3987"/>
    <rpm:requires>
      <rpm:entry name="popt-devel"/>
      <rpm:entry name="zlib-devel"/>
      <rpm:entry name="autoconf"/>
      <rpm:entry name="automake"/>
      <rpm:entry name="bzip2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>librsync</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="0.9.7" rel="181.2"/>
  <checksum type="sha" pkgid="YES">22c5c00317dde76c3d68b839221fd59cf1e19b4d</checksum>
  <summary>A Library for Generating Network Deltas</summary>
  <description>librsync implements the "rsync" algorithm, which allows remote
differencing of binary files.  librsync computes a delta relative to a
file's checksum, so the two files need not both be present to generate
a delta.



Authors:
--------
    Martin Pool &lt;mbp@samba.org&gt;
    Andrew Tridgell &lt;tridge@samba.org&gt;
    Donovan Baarda &lt;abo@minkirri.apana.org.au&gt;</description>
  <packager></packager>
  <url>http://librsync.sourceforge.net/</url>
  <time file="1625560158" build="1625560153"/>
  <size package="59670" installed="153547" archive="155892"/>
  <location href="x86_64/librsync-0.9.7-181.2.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL v2.1 or later</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>hci-cnode1-e5</rpm:buildhost>
    <rpm:sourcerpm>librsync-0.9.7-181.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5444"/>
    <rpm:provides>
      <rpm:entry name="librsync.so.1()(64bit)"/>
      <rpm:entry name="librsync" flags="EQ" epoch="0" ver="0.9.7" rel="181.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="libbz2.so.1()(64bit)"/>
      <rpm:entry name="libpopt.so.0()(64bit)"/>
      <rpm:entry name="libz.so.1()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/rdiff</file>
  </format>
</package>
<package type="rpm">
  <name>libsnappy1</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.1.2" rel="11.1"/>
  <checksum type="sha" pkgid="YES">12e49c7680e0adfbdad1a22c549ed0e7954d854c</checksum>
  <summary>Shared library from snappy</summary>
  <description>Snappy is a compression/decompression library. It does not aim for maximum compression,
or compatibility with any other compression library; instead, it aims for very high
speeds and reasonable compression. For instance, compared to the fastest mode of zlib,
Snappy is an order of magnitude faster for most inputs, but the resulting compressed
files are anywhere from 20% to 100% bigger. On a single core of a Core i7 processor
in 64-bit mode, Snappy compresses at about 250 MB/sec or more and decompresses at about
500 MB/sec or more.

This package holds the shared library of snappy.</description>
  <packager></packager>
  <url>http://code.google.com/p/snappy/</url>
  <time file="1625560160" build="1625560156"/>
  <size package="18117" installed="27762" archive="28336"/>
  <location href="i586/libsnappy1-1.1.2-11.1.i586.rpm"/>
  <format>
    <rpm:license>BSD-3-Clause</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>lamb20</rpm:buildhost>
    <rpm:sourcerpm>snappy-1.1.2-11.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4960"/>
    <rpm:provides>
      <rpm:entry name="libsnappy.so.1"/>
      <rpm:entry name="libsnappy1" flags="EQ" epoch="0" ver="1.1.2" rel="11.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libstdc++.so.6"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.1.3)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libsnappy1</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.1.2" rel="11.1"/>
  <checksum type="sha" pkgid="YES">a413f0737465a86a2a28aaa9cd1bd534e9a5bbfe</checksum>
  <summary>Shared library from snappy</summary>
  <description>Snappy is a compression/decompression library. It does not aim for maximum compression,
or compatibility with any other compression library; instead, it aims for very high
speeds and reasonable compression. For instance, compared to the fastest mode of zlib,
Snappy is an order of magnitude faster for most inputs, but the resulting compressed
files are anywhere from 20% to 100% bigger. On a single core of a Core i7 processor
in 64-bit mode, Snappy compresses at about 250 MB/sec or more and decompresses at about
500 MB/sec or more.

This package holds the shared library of snappy.</description>
  <packager></packager>
  <url>http://code.google.com/p/snappy/</url>
  <time file="1625560158" build="1625560153"/>
  <size package="17972" installed="31966" archive="32548"/>
  <location href="x86_64/libsnappy1-1.1.2-11.1.x86_64.rpm"/>
  <format>
    <rpm:license>BSD-3-Clause</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>goat11</rpm:buildhost>
    <rpm:sourcerpm>snappy-1.1.2-11.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4990"/>
    <rpm:provides>
      <rpm:entry name="libsnappy.so.1()(64bit)"/>
      <rpm:entry name="libsnappy1" flags="EQ" epoch="0" ver="1.1.2" rel="11.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="libgcc_s.so.1()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.2.5)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>lynis</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.4.9" rel="11.1"/>
  <checksum type="sha" pkgid="YES">469c5efe677b44437eef8bc3b9281bba024ce541</checksum>
  <summary>Security and system auditing tool.</summary>
  <description>Lynis is a security tool to audit and harden Unix/Linux based systems. It scans a
system and provides the user with suggestion and warnings regarding taken security
measures. Examples include:
     - Security enhancements
     - Logging and auditing options
     - Banner identification
     - Software availability
     - Missing security patches

Lynis is released as a GPLv3 licensed project and free for everyone to use.

See http://cisofy.com for a full description and documentation.</description>
  <packager>Michael Boelen &lt;michael@rootkit.nl&gt;</packager>
  <url>http://cisofy.com/</url>
  <time file="1625560754" build="1625560748"/>
  <size package="115896" installed="1245920" archive="751532"/>
  <location href="noarch/lynis-1.4.9-11.1.noarch.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>CISOfy / Michael Boelen</rpm:vendor>
    <rpm:group>Applications/System</rpm:group>
    <rpm:buildhost>lamb55</rpm:buildhost>
    <rpm:sourcerpm>lynis-1.4.9-11.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="9219"/>
    <rpm:provides>
      <rpm:entry name="lynis" flags="EQ" epoch="0" ver="1.4.9" rel="11.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh"/>
    </rpm:requires>
    <file type="dir">/etc/lynis</file>
    <file>/etc/lynis/default.prf</file>
    <file>/usr/bin/lynis</file>
  </format>
</package>
<package type="rpm">
  <name>lynis</name>
  <arch>src</arch>
  <version epoch="0" ver="1.4.9" rel="11.1"/>
  <checksum type="sha" pkgid="YES">82562cae9e22d4183385bfabcea1822faa710db0</checksum>
  <summary>Security and system auditing tool.</summary>
  <description>Lynis is a security tool to audit and harden Unix/Linux based systems. It scans a
system and provides the user with suggestion and warnings regarding taken security
measures. Examples include:
     - Security enhancements
     - Logging and auditing options
     - Banner identification
     - Software availability
     - Missing security patches

Lynis is released as a GPLv3 licensed project and free for everyone to use.

See http://cisofy.com for a full description and documentation.</description>
  <packager>Michael Boelen &lt;michael@rootkit.nl&gt;</packager>
  <url>http://cisofy.com/</url>
  <time file="1625560754" build="1625560748"/>
  <size package="149492" installed="148526" archive="148908"/>
  <location href="src/lynis-1.4.9-11.1.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>CISOfy / Michael Boelen</rpm:vendor>
    <rpm:group>Applications/System</rpm:group>
    <rpm:buildhost>lamb55</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2737"/>
  </format>
</package>
<package type="rpm">
  <name>nuttcp</name>
  <arch>i586</arch>
  <version epoch="0" ver="6.1.2" rel="3.4"/>
  <checksum type="sha" pkgid="YES">af9061ee6953217b19d1e1fc51de9acf74e724fd</checksum>
  <summary>nuttcp - network performance measurement tool</summary>
  <description>nuttcp is a network performance measurement tool intended for use by network
and system managers. Its most basic usage is to determine the raw TCP (or
UDP) network layer throughput by transferring memory buffers from a source
system across an interconnecting network to a destination system, either
transferring data for a specified time interval, or alternatively
transferring a specified number of bytes. In addition to reporting the
achieved network throughput in Mbps, nuttcp also provides additional useful
information related to the data transfer such as user, system, and
wall-clock time, transmitter and receiver CPU utilization, and loss
percentage (for UDP transfers).

nuttcp is based on nttcp, which in turn was an enhancement by someone at
Silicon Graphics (SGI) on the original ttcp, which was written by Mike Muuss
at BRL sometime before December 1984, to compare the performance of TCP
stacks by U.C. Berkeley and BBN to help DARPA decide which version to place
in the first BSD Unix release. nuttcp has several useful features beyond
those of the basic ttcp/nttcp, such as a server mode, rate limiting,
multiple parallel streams, and timer based usage. More recent changes
include IPv6 support, IPv4 multicast, and the ability to set the maximum
segment size or TOS/DSCP bits. nuttcp is continuing to evolve to meet new
requirements that arise and to add desired new features. nuttcp has been
successfully built and run on a variety of Solaris, SGI, and PPC/X86 Linux
systems, and should probably work fine on most flavors of Unix. It has also
been used successfully on various versions of the Windows operating system.</description>
  <packager></packager>
  <url>ftp://ftp.lcp.nrl.navy.mil/pub/nuttcp/</url>
  <time file="1625560227" build="1625560219"/>
  <size package="59028" installed="146728" archive="147596"/>
  <location href="i586/nuttcp-6.1.2-3.4.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>lamb27</rpm:buildhost>
    <rpm:sourcerpm>nuttcp-6.1.2-3.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4175"/>
    <rpm:provides>
      <rpm:entry name="nuttcp" flags="EQ" epoch="0" ver="6.1.2" rel="3.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libc.so.6(GLIBC_2.3)"/>
    </rpm:requires>
    <file>/usr/sbin/nuttcp</file>
  </format>
</package>
<package type="rpm">
  <name>nuttcp</name>
  <arch>src</arch>
  <version epoch="0" ver="6.1.2" rel="3.4"/>
  <checksum type="sha" pkgid="YES">e385ffe7ee6e0643e3f2559070de64f450058600</checksum>
  <summary>nuttcp - network performance measurement tool</summary>
  <description>nuttcp is a network performance measurement tool intended for use by network
and system managers. Its most basic usage is to determine the raw TCP (or
UDP) network layer throughput by transferring memory buffers from a source
system across an interconnecting network to a destination system, either
transferring data for a specified time interval, or alternatively
transferring a specified number of bytes. In addition to reporting the
achieved network throughput in Mbps, nuttcp also provides additional useful
information related to the data transfer such as user, system, and
wall-clock time, transmitter and receiver CPU utilization, and loss
percentage (for UDP transfers).

nuttcp is based on nttcp, which in turn was an enhancement by someone at
Silicon Graphics (SGI) on the original ttcp, which was written by Mike Muuss
at BRL sometime before December 1984, to compare the performance of TCP
stacks by U.C. Berkeley and BBN to help DARPA decide which version to place
in the first BSD Unix release. nuttcp has several useful features beyond
those of the basic ttcp/nttcp, such as a server mode, rate limiting,
multiple parallel streams, and timer based usage. More recent changes
include IPv6 support, IPv4 multicast, and the ability to set the maximum
segment size or TOS/DSCP bits. nuttcp is continuing to evolve to meet new
requirements that arise and to add desired new features. nuttcp has been
successfully built and run on a variety of Solaris, SGI, and PPC/X86 Linux
systems, and should probably work fine on most flavors of Unix. It has also
been used successfully on various versions of the Windows operating system.</description>
  <packager></packager>
  <url>ftp://ftp.lcp.nrl.navy.mil/pub/nuttcp/</url>
  <time file="1625560159" build="1625560154"/>
  <size package="83216" installed="80940" archive="81324"/>
  <location href="src/nuttcp-6.1.2-3.4.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>goat05</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="3481"/>
  </format>
</package>
<package type="rpm">
  <name>nuttcp</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="6.1.2" rel="3.4"/>
  <checksum type="sha" pkgid="YES">9fa7607ed056ce03500d4c179366c5492a0555e7</checksum>
  <summary>nuttcp - network performance measurement tool</summary>
  <description>nuttcp is a network performance measurement tool intended for use by network
and system managers. Its most basic usage is to determine the raw TCP (or
UDP) network layer throughput by transferring memory buffers from a source
system across an interconnecting network to a destination system, either
transferring data for a specified time interval, or alternatively
transferring a specified number of bytes. In addition to reporting the
achieved network throughput in Mbps, nuttcp also provides additional useful
information related to the data transfer such as user, system, and
wall-clock time, transmitter and receiver CPU utilization, and loss
percentage (for UDP transfers).

nuttcp is based on nttcp, which in turn was an enhancement by someone at
Silicon Graphics (SGI) on the original ttcp, which was written by Mike Muuss
at BRL sometime before December 1984, to compare the performance of TCP
stacks by U.C. Berkeley and BBN to help DARPA decide which version to place
in the first BSD Unix release. nuttcp has several useful features beyond
those of the basic ttcp/nttcp, such as a server mode, rate limiting,
multiple parallel streams, and timer based usage. More recent changes
include IPv6 support, IPv4 multicast, and the ability to set the maximum
segment size or TOS/DSCP bits. nuttcp is continuing to evolve to meet new
requirements that arise and to add desired new features. nuttcp has been
successfully built and run on a variety of Solaris, SGI, and PPC/X86 Linux
systems, and should probably work fine on most flavors of Unix. It has also
been used successfully on various versions of the Windows operating system.</description>
  <packager></packager>
  <url>ftp://ftp.lcp.nrl.navy.mil/pub/nuttcp/</url>
  <time file="1625560159" build="1625560154"/>
  <size package="67188" installed="150185" archive="151052"/>
  <location href="x86_64/nuttcp-6.1.2-3.4.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>goat05</rpm:buildhost>
    <rpm:sourcerpm>nuttcp-6.1.2-3.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4155"/>
    <rpm:provides>
      <rpm:entry name="nuttcp" flags="EQ" epoch="0" ver="6.1.2" rel="3.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libc.so.6(GLIBC_2.3)(64bit)"/>
    </rpm:requires>
    <file>/usr/sbin/nuttcp</file>
  </format>
</package>
<package type="rpm">
  <name>perl-Authen-PAM</name>
  <arch>i586</arch>
  <version epoch="0" ver="0.16" rel="4.2"/>
  <checksum type="sha" pkgid="YES">884e42f3b451369b5d390d74dee3a7fd76e20ab6</checksum>
  <summary>PAM Authentication framework</summary>
  <description>This module provides a Perl interface to the PAM library.</description>
  <packager></packager>
  <url>http://search.cpan.org/dist/Authen-PAM/</url>
  <time file="1681476510" build="1681476507"/>
  <size package="36956" installed="74556" archive="77268"/>
  <location href="i586/perl-Authen-PAM-0.16-4.2.i586.rpm"/>
  <format>
    <rpm:license>Artistic-1.0 or GPL-1.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Perl</rpm:group>
    <rpm:buildhost>sheep84</rpm:buildhost>
    <rpm:sourcerpm>perl-Authen-PAM-0.16-4.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="3934"/>
    <rpm:provides>
      <rpm:entry name="PAM.so"/>
      <rpm:entry name="perl(Authen::PAM)" flags="EQ" epoch="0" ver="0.16"/>
      <rpm:entry name="perl-Authen-PAM" flags="EQ" epoch="0" ver="0.16" rel="4.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="perl" flags="EQ" epoch="0" ver="5.8.8"/>
      <rpm:entry name="libpam.so.0"/>
      <rpm:entry name="libpam.so.0(LIBPAM_1.0)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.1.3)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>perl-Authen-PAM</name>
  <arch>src</arch>
  <version epoch="0" ver="0.16" rel="4.2"/>
  <checksum type="sha" pkgid="YES">4029925ee224766c118f72ba3237dba9ffb3ab9a</checksum>
  <summary>PAM Authentication framework</summary>
  <description>This module provides a Perl interface to the PAM library.</description>
  <packager></packager>
  <url>http://search.cpan.org/dist/Authen-PAM/</url>
  <time file="1681477141" build="1681477138"/>
  <size package="49405" installed="48422" archive="48816"/>
  <location href="src/perl-Authen-PAM-0.16-4.2.src.rpm"/>
  <format>
    <rpm:license>Artistic-1.0 or GPL-1.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Perl</rpm:group>
    <rpm:buildhost>build77</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2001"/>
    <rpm:requires>
      <rpm:entry name="perl"/>
      <rpm:entry name="perl-macros"/>
      <rpm:entry name="pam-devel"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>perl-Authen-PAM</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="0.16" rel="4.2"/>
  <checksum type="sha" pkgid="YES">1922de6de81a55c233061fcbdee9c5aba09a1d23</checksum>
  <summary>PAM Authentication framework</summary>
  <description>This module provides a Perl interface to the PAM library.</description>
  <packager></packager>
  <url>http://search.cpan.org/dist/Authen-PAM/</url>
  <time file="1681477141" build="1681477138"/>
  <size package="37405" installed="76461" archive="79200"/>
  <location href="x86_64/perl-Authen-PAM-0.16-4.2.x86_64.rpm"/>
  <format>
    <rpm:license>Artistic-1.0 or GPL-1.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Perl</rpm:group>
    <rpm:buildhost>build77</rpm:buildhost>
    <rpm:sourcerpm>perl-Authen-PAM-0.16-4.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="3938"/>
    <rpm:provides>
      <rpm:entry name="PAM.so()(64bit)"/>
      <rpm:entry name="perl(Authen::PAM)" flags="EQ" epoch="0" ver="0.16"/>
      <rpm:entry name="perl-Authen-PAM" flags="EQ" epoch="0" ver="0.16" rel="4.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="perl" flags="EQ" epoch="0" ver="5.8.8"/>
      <rpm:entry name="libpam.so.0()(64bit)"/>
      <rpm:entry name="libpam.so.0(LIBPAM_1.0)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.2.5)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>perl-LWP-MediaTypes</name>
  <arch>noarch</arch>
  <version epoch="0" ver="6.02" rel="8.2.2"/>
  <checksum type="sha" pkgid="YES">957943b90e2d25d1755bd4bee2aca3231fe55ae5</checksum>
  <summary>guess media type for a file or a URL</summary>
  <description>This module provides functions for handling media (also known as MIME)
types and encodings. The mapping from file extensions to media types is
defined by the _media.types_ file. If the _~/.media.types_ file exists it
is used instead. For backwards compatibility we will also look for
_~/.mime.types_.

The following functions are exported by default:

* guess_media_type( $filename )

* guess_media_type( $uri )

* guess_media_type( $filename_or_uri, $header_to_modify )

  This function tries to guess media type and encoding for a file or a URI.
  It returns the content type, which is a string like '"text/html"'. In
  array context it also returns any content encodings applied (in the order
  used to encode the file). You can pass a URI object reference, instead of
  the file name.

  If the type can not be deduced from looking at the file name, then
  guess_media_type() will let the '-T' Perl operator take a look. If this
  works (and '-T' returns a TRUE value) then we return _text/plain_ as the
  type, otherwise we return _application/octet-stream_ as the type.

  The optional second argument should be a reference to a HTTP::Headers
  object or any object that implements the $obj-&gt;header method in a similar
  way. When it is present the values of the 'Content-Type' and
  'Content-Encoding' will be set for this header.

* media_suffix( $type, ... )

  This function will return all suffixes that can be used to denote the
  specified media type(s). Wildcard types can be used. In a scalar context
  it will return the first suffix found. Examples:

    @suffixes = media_suffix('image/*', 'audio/basic');
    $suffix = media_suffix('text/html');

The following functions are only exported by explicit request:

* add_type( $type, @exts )

  Associate a list of file extensions with the given media type. Example:

      add_type("x-world/x-vrml" =&gt; qw(wrl vrml));

* add_encoding( $type, @ext )

  Associate a list of file extensions with an encoding type. Example:

   add_encoding("x-gzip" =&gt; "gz");

* read_media_types( @files )

  Parse media types files and add the type mappings found there. Example:

      read_media_types("conf/mime.types");</description>
  <packager></packager>
  <url>http://search.cpan.org/dist/LWP-MediaTypes/</url>
  <time file="1681477084" build="1681477082"/>
  <size package="25520" installed="62746" archive="64164"/>
  <location href="noarch/perl-LWP-MediaTypes-6.02-8.2.2.noarch.rpm"/>
  <format>
    <rpm:license>Artistic-1.0 or GPL-1.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Perl</rpm:group>
    <rpm:buildhost>build85</rpm:buildhost>
    <rpm:sourcerpm>perl-LWP-MediaTypes-6.02-8.2.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5218"/>
    <rpm:provides>
      <rpm:entry name="perl(LWP::MediaTypes)" flags="EQ" epoch="0" ver="6.02"/>
      <rpm:entry name="perl-LWP-MediaTypes" flags="EQ" epoch="0" ver="6.02" rel="8.2.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="perl" flags="EQ" epoch="0" ver="5.8.8"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>perl-LWP-MediaTypes</name>
  <arch>src</arch>
  <version epoch="0" ver="6.02" rel="8.2.2"/>
  <checksum type="sha" pkgid="YES">9b45715f25b5b450eb1502fb35fddf5fb1776ade</checksum>
  <summary>guess media type for a file or a URL</summary>
  <description>This module provides functions for handling media (also known as MIME)
types and encodings. The mapping from file extensions to media types is
defined by the _media.types_ file. If the _~/.media.types_ file exists it
is used instead. For backwards compatibility we will also look for
_~/.mime.types_.

The following functions are exported by default:

* guess_media_type( $filename )

* guess_media_type( $uri )

* guess_media_type( $filename_or_uri, $header_to_modify )

  This function tries to guess media type and encoding for a file or a URI.
  It returns the content type, which is a string like '"text/html"'. In
  array context it also returns any content encodings applied (in the order
  used to encode the file). You can pass a URI object reference, instead of
  the file name.

  If the type can not be deduced from looking at the file name, then
  guess_media_type() will let the '-T' Perl operator take a look. If this
  works (and '-T' returns a TRUE value) then we return _text/plain_ as the
  type, otherwise we return _application/octet-stream_ as the type.

  The optional second argument should be a reference to a HTTP::Headers
  object or any object that implements the $obj-&gt;header method in a similar
  way. When it is present the values of the 'Content-Type' and
  'Content-Encoding' will be set for this header.

* media_suffix( $type, ... )

  This function will return all suffixes that can be used to denote the
  specified media type(s). Wildcard types can be used. In a scalar context
  it will return the first suffix found. Examples:

    @suffixes = media_suffix('image/*', 'audio/basic');
    $suffix = media_suffix('text/html');

The following functions are only exported by explicit request:

* add_type( $type, @exts )

  Associate a list of file extensions with the given media type. Example:

      add_type("x-world/x-vrml" =&gt; qw(wrl vrml));

* add_encoding( $type, @ext )

  Associate a list of file extensions with an encoding type. Example:

   add_encoding("x-gzip" =&gt; "gz");

* read_media_types( @files )

  Parse media types files and add the type mappings found there. Example:

      read_media_types("conf/mime.types");</description>
  <packager></packager>
  <url>http://search.cpan.org/dist/LWP-MediaTypes/</url>
  <time file="1681477084" build="1681477082"/>
  <size package="25371" installed="22734" archive="23136"/>
  <location href="src/perl-LWP-MediaTypes-6.02-8.2.2.src.rpm"/>
  <format>
    <rpm:license>Artistic-1.0 or GPL-1.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Perl</rpm:group>
    <rpm:buildhost>build85</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="4273"/>
    <rpm:requires>
      <rpm:entry name="perl"/>
      <rpm:entry name="perl-macros"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>perl-macros</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.0" rel="3.1"/>
  <checksum type="sha" pkgid="YES">a9dad7eefa9257bf4cf4fbb1b082ea43183f462b</checksum>
  <summary>Perl macros for rpm build</summary>
  <description>This package provides perl rpm macros.
You need it for building perl modules

  Authors:
                Christian Wittmer &lt;chris@computersalat.de&gt;</description>
  <packager></packager>
  <url>https://www.perl.org/</url>
  <time file="1681476449" build="1681476446"/>
  <size package="6137" installed="5411" archive="5984"/>
  <location href="i586/perl-macros-1.0-3.1.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Perl</rpm:group>
    <rpm:buildhost>cloud129</rpm:buildhost>
    <rpm:sourcerpm>perl-macros-1.0-3.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4025"/>
    <rpm:provides>
      <rpm:entry name="perl_gen_filelist"/>
      <rpm:entry name="perl-macros" flags="EQ" epoch="0" ver="1.0" rel="3.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="perl"/>
      <rpm:entry name="/bin/sh" pre="1"/>
    </rpm:requires>
    <file>/etc/rpm/macros.suse-perl</file>
  </format>
</package>
<package type="rpm">
  <name>perl-macros</name>
  <arch>src</arch>
  <version epoch="0" ver="1.0" rel="3.1"/>
  <checksum type="sha" pkgid="YES">6f8934395ac8cd469b1f695086a589359b3c780a</checksum>
  <summary>Perl macros for rpm build</summary>
  <description>This package provides perl rpm macros.
You need it for building perl modules

  Authors:
                Christian Wittmer &lt;chris@computersalat.de&gt;</description>
  <packager></packager>
  <url>https://www.perl.org/</url>
  <time file="1681476529" build="1681476526"/>
  <size package="7344" installed="12217" archive="12856"/>
  <location href="src/perl-macros-1.0-3.1.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Perl</rpm:group>
    <rpm:buildhost>lamb28</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="3564"/>
  </format>
</package>
<package type="rpm">
  <name>perl-macros</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.0" rel="3.1"/>
  <checksum type="sha" pkgid="YES">c140f34b38738b2194b6a224ad65165ca04487f7</checksum>
  <summary>Perl macros for rpm build</summary>
  <description>This package provides perl rpm macros.
You need it for building perl modules

  Authors:
                Christian Wittmer &lt;chris@computersalat.de&gt;</description>
  <packager></packager>
  <url>https://www.perl.org/</url>
  <time file="1681476529" build="1681476526"/>
  <size package="6109" installed="5411" archive="5984"/>
  <location href="x86_64/perl-macros-1.0-3.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Perl</rpm:group>
    <rpm:buildhost>lamb28</rpm:buildhost>
    <rpm:sourcerpm>perl-macros-1.0-3.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4005"/>
    <rpm:provides>
      <rpm:entry name="perl_gen_filelist"/>
      <rpm:entry name="perl-macros" flags="EQ" epoch="0" ver="1.0" rel="3.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="perl"/>
      <rpm:entry name="/bin/sh" pre="1"/>
    </rpm:requires>
    <file>/etc/rpm/macros.suse-perl</file>
  </format>
</package>
<package type="rpm">
  <name>pflogsumm</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.1.5" rel="1.1"/>
  <checksum type="sha" pkgid="YES">310786f4cb315711017b69466b0c17288d81d4b9</checksum>
  <summary>pflogsumm - postfix logfile analyzer</summary>
  <description>pflogsumm.pl is designed to provide an over-view of postfix activity, with
just enough detail to give the administrator a "heads up" for potential
trouble spots. The following is an over-view of the reports produced:</description>
  <packager></packager>
  <url>http://jimsun.linxnet.com/postfix_contrib.html</url>
  <time file="1625560935" build="1625560931"/>
  <size package="48442" installed="129369" archive="130560"/>
  <location href="noarch/pflogsumm-1.1.5-1.1.noarch.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>sheep85</rpm:buildhost>
    <rpm:sourcerpm>pflogsumm-1.1.5-1.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="3041"/>
    <rpm:provides>
      <rpm:entry name="pflogsumm" flags="EQ" epoch="0" ver="1.1.5" rel="1.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="perl-Date-Calc"/>
      <rpm:entry name="perl-TimeDate"/>
      <rpm:entry name="/usr/bin/perl"/>
    </rpm:requires>
    <file>/usr/sbin/pflogsumm.pl</file>
  </format>
</package>
<package type="rpm">
  <name>pflogsumm</name>
  <arch>src</arch>
  <version epoch="0" ver="1.1.5" rel="1.1"/>
  <checksum type="sha" pkgid="YES">3795de439dc6cccd020e730f6a9a5355e5718ec4</checksum>
  <summary>pflogsumm - postfix logfile analyzer</summary>
  <description>pflogsumm.pl is designed to provide an over-view of postfix activity, with
just enough detail to give the administrator a "heads up" for potential
trouble spots. The following is an over-view of the reports produced:</description>
  <packager></packager>
  <url>http://jimsun.linxnet.com/postfix_contrib.html</url>
  <time file="1625560935" build="1625560931"/>
  <size package="52417" installed="52019" archive="52552"/>
  <location href="src/pflogsumm-1.1.5-1.1.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>sheep85</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2369"/>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">3c478f873ea88e10784a04f7981fc9d2e7165bd6</checksum>
  <summary>Leading open-source PHP framework</summary>
  <description>Extending the art &amp; spirit of PHP, Zend Framework is based on simplicity,
object-oriented best practices, corporate friendly licensing, and a rigorously
tested agile codebase. Zend Framework is focused on building more secure,
reliable, and modern Web 2.0 applications &amp; web services, and consuming widely
available APIs from leading vendors like Google, Amazon, Yahoo!, Flickr, as
well as API providers and catalogers like StrikeIron and ProgrammableWeb.</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560761" build="1625560730"/>
  <size package="2694436" installed="86559291" archive="23792052"/>
  <location href="noarch/php5-ZendFramework-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="299668"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="pcre"/>
      <rpm:entry name="php5" flags="GE" epoch="0" ver="5.2.4"/>
      <rpm:entry name="php5-ctype"/>
      <rpm:entry name="php5-curl"/>
      <rpm:entry name="php5-dom"/>
      <rpm:entry name="php5-hash"/>
      <rpm:entry name="php5-iconv"/>
      <rpm:entry name="php5-mbstring"/>
      <rpm:entry name="php5-pdo"/>
      <rpm:entry name="php5-xmlreader"/>
      <rpm:entry name="php5-zlib"/>
      <rpm:entry name="/bin/sh"/>
    </rpm:requires>
    <rpm:suggests>
      <rpm:entry name="php5-bcmath"/>
      <rpm:entry name="php5-bitset"/>
      <rpm:entry name="php5-json"/>
      <rpm:entry name="php5-posix"/>
    </rpm:suggests>
    <file>/usr/bin/zf</file>
    <file>/usr/bin/zf.php</file>
    <file>/usr/bin/zf.sh</file>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework</name>
  <arch>src</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">9eafb40cc378f5bfd181de5de923a6141d383683</checksum>
  <summary>Leading open-source PHP framework</summary>
  <description>Extending the art &amp; spirit of PHP, Zend Framework is based on simplicity,
object-oriented best practices, corporate friendly licensing, and a rigorously
tested agile codebase. Zend Framework is focused on building more secure,
reliable, and modern Web 2.0 applications &amp; web services, and consuming widely
available APIs from leading vendors like Google, Amazon, Yahoo!, Flickr, as
well as API providers and catalogers like StrikeIron and ProgrammableWeb.</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="36290909" installed="36335130" archive="36336068"/>
  <location href="src/php5-ZendFramework-1.11.10-7.2.src.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="5146"/>
    <rpm:requires>
      <rpm:entry name="php5-sqlite"/>
      <rpm:entry name="php5-xmlreader"/>
      <rpm:entry name="autoconf"/>
      <rpm:entry name="make"/>
      <rpm:entry name="unzip"/>
      <rpm:entry name="libxml2"/>
      <rpm:entry name="libxslt"/>
      <rpm:entry name="docbook-xsl-stylesheets"/>
      <rpm:entry name="docbook_4"/>
      <rpm:entry name="iso_ent"/>
      <rpm:entry name="sgml-skel"/>
      <rpm:entry name="xmlcharent"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-cache-backend-apc</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">df37c814d2f3f2250c508a0411797b3b38e06344</checksum>
  <summary>Zend Framework APC cache backend</summary>
  <description>This package contains the backend for Zend_Cache to store and retrieve data via
APC.</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="8491" installed="12652" archive="13288"/>
  <location href="noarch/php5-ZendFramework-cache-backend-apc-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4656"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-cache-backend-apc" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
      <rpm:entry name="php5-APC"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-cache-backend-memcached</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">88c6b20a8694af5e0eb3d16980b7d0af9786ab6c</checksum>
  <summary>Zend Framework memcache cache backend</summary>
  <description>This package contains the back end for Zend_Cache to store and retrieve data
via memcache.</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="9977" installed="19438" archive="20096"/>
  <location href="noarch/php5-ZendFramework-cache-backend-memcached-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4706"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-cache-backend-memcached" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
      <rpm:entry name="php5-pecl-memcache"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-captcha</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">dd511df0dfeefd2b8d0fa2cfc8bb07a9e905e714</checksum>
  <summary>Zend Framework CAPTCHA component</summary>
  <description>This package contains the Zend Framework CAPTCHA extension.</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="13308" installed="44378" archive="46220"/>
  <location href="noarch/php5-ZendFramework-captcha-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5276"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-captcha" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
      <rpm:entry name="php5-gd"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-demos</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">ea8a7f3130b37722ecad89b025cc24effc54419e</checksum>
  <summary>Demos for the Zend Framework</summary>
  <description>This package includes Zend Framework demos for the Feeds, Gdata, Mail, OpenId,
Pdf, Search-Lucene and Services subpackages.</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="1367274" installed="2095387" archive="2144572"/>
  <location href="noarch/php5-ZendFramework-demos-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="31099"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-demos" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-dojo</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">bc0cb1647afece37f02cc227a682bdbf94a69851</checksum>
  <summary>Dojo javascript toolkit</summary>
  <description>This package contains a full copy of the Dojo Javascript toolkit from
Zend Framework externals. You may wish to install this as a reference or
to build custom Dojo layers for deployment with your site.</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="16683355" installed="39352042" archive="40444948"/>
  <location href="noarch/php5-ZendFramework-dojo-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="569083"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-dojo" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
      <rpm:entry name="unzip"/>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-extras</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">006ea8698a845303b4392f0e82303bdc54a39085</checksum>
  <summary>Zend Framework Extras (ZendX)</summary>
  <description>This package includes the ZendX libraries.</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="73424" installed="438128" archive="461372"/>
  <location href="noarch/php5-ZendFramework-extras-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="17268"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-ZendX" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
      <rpm:entry name="php5-ZendFramework-extras" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-manual-de</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">6294bc214a4e5629878f4a3c8e540662c9454f86</checksum>
  <summary>Zend Framework German programmers reference guide</summary>
  <description>Programmer's reference guide</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="6226" installed="2821" archive="3588"/>
  <location href="noarch/php5-ZendFramework-manual-de-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4646"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-manual-de" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-manual-en</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">671423dcb870962dd80d4910a0f81f48718a308e</checksum>
  <summary>Zend Framework English programmers reference guide</summary>
  <description>Programmer's reference guide</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="6223" installed="2821" archive="3588"/>
  <location href="noarch/php5-ZendFramework-manual-en-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4646"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-manual-en" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-manual-fr</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">647a0eac51a4305bfed7b9aff4d3239e5b934083</checksum>
  <summary>Zend Framework French programmers reference guide</summary>
  <description>Programmer's reference guide</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="6227" installed="2821" archive="3588"/>
  <location href="noarch/php5-ZendFramework-manual-fr-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4646"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-manual-fr" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-manual-ja</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">eee504b50c5695de1d5b1e5e9d3c5c095d67ef0f</checksum>
  <summary>Zend Framework Japanese programmers reference guide</summary>
  <description>Programmer's reference guide</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="6229" installed="2821" archive="3588"/>
  <location href="noarch/php5-ZendFramework-manual-ja-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4646"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-manual-ja" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-manual-zh</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">a64f341662e7157fc7b4352fd8750160429d47bf</checksum>
  <summary>Zend Framework simplified Chinese programmers reference guide</summary>
  <description>Programmer's reference guide</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="6526" installed="3684" archive="4448"/>
  <location href="noarch/php5-ZendFramework-manual-zh-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4658"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-manual-zh" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-pdf</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">bc52fdf1514d68d8c3cdfba546a2a4bfb0518990</checksum>
  <summary>PDF document creation and manipulation</summary>
  <description>Portable Document Format (PDF) from Adobe is the de facto standard for
cross-platform rich documents. Now, PHP applications can create or read PDF
documents on the fly, without the need to call utilities from the shell, depend
on PHP extensions, or pay licensing fees. Zend_Pdf can even modify existing PDF
documents.

* supports Adobe PDF file format
* parses PDF structure and provides access to elements
* creates or modifies PDF documents
* utilizes memory efficiently</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="143206" installed="1151841" archive="1178880"/>
  <location href="noarch/php5-ZendFramework-pdf-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="19900"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-pdf" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
      <rpm:entry name="php5-gd"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-ZendFramework-tests</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.11.10" rel="7.2"/>
  <checksum type="sha" pkgid="YES">8e0452fc9a29ae4ab76b8729707b9f5b4ce2f610</checksum>
  <summary>Unit tests for the Zend Framework</summary>
  <description>This package includes Zend Framework unit tests for all available subpackages.</description>
  <packager></packager>
  <url>http://framework.zend.com/</url>
  <time file="1625560762" build="1625560730"/>
  <size package="4027834" installed="20632443" archive="21395100"/>
  <location href="noarch/php5-ZendFramework-tests-1.11.10-7.2.noarch.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Other</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>php5-ZendFramework-1.11.10-7.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="409069"/>
    <rpm:provides>
      <rpm:entry name="php5-ZendFramework-tests" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5-ZendFramework" flags="EQ" epoch="0" ver="1.11.10" rel="7.2"/>
      <rpm:entry name="php5-pear-phpunit"/>
      <rpm:entry name="/bin/bash"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-lzf</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.6.5" rel="5.1"/>
  <checksum type="sha" pkgid="YES">3532807e5a07fd279971fe768fb8bf426a9d8385</checksum>
  <summary>PHP LZF de/compression extension</summary>
  <description>
	 	This package handles LZF de/compression.
Authors:
---------
	marcin gibula &lt;mg@iceni.pl&gt;</description>
  <packager></packager>
  <url>http://pecl.php.net/</url>
  <time file="1625560771" build="1625560764"/>
  <size package="9555" installed="15076" archive="15776"/>
  <location href="i586/php5-lzf-1.6.5-5.1.i586.rpm"/>
  <format>
    <rpm:license>PHP</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Web/Servers</rpm:group>
    <rpm:buildhost>lamb57</rpm:buildhost>
    <rpm:sourcerpm>php5-lzf-1.6.5-5.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="2773"/>
    <rpm:provides>
      <rpm:entry name="php-lzf" flags="EQ" epoch="0" ver="1.6.5"/>
      <rpm:entry name="lzf.so"/>
      <rpm:entry name="php5-lzf" flags="EQ" epoch="0" ver="1.6.5" rel="5.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5" flags="EQ" epoch="0" ver="5.1.2"/>
      <rpm:entry name="libc.so.6(GLIBC_2.1.3)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="php-lzf" flags="LT" epoch="0" ver="1.6.5"/>
    </rpm:obsoletes>
    <file>/etc/php5/conf.d/lzf.ini</file>
  </format>
</package>
<package type="rpm">
  <name>php5-lzf</name>
  <arch>src</arch>
  <version epoch="0" ver="1.6.5" rel="5.1"/>
  <checksum type="sha" pkgid="YES">86993f008d7eafd4e228407233f223ecaa145966</checksum>
  <summary>PHP LZF de/compression extension</summary>
  <description>
	 	This package handles LZF de/compression.
Authors:
---------
	marcin gibula &lt;mg@iceni.pl&gt;</description>
  <packager></packager>
  <url>http://pecl.php.net/</url>
  <time file="1625560445" build="1625560437"/>
  <size package="20889" installed="20034" archive="20540"/>
  <location href="src/php5-lzf-1.6.5-5.1.src.rpm"/>
  <format>
    <rpm:license>PHP</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Web/Servers</rpm:group>
    <rpm:buildhost>lamb04</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2146"/>
    <rpm:requires>
      <rpm:entry name="php5-devel"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>php5-lzf</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.6.5" rel="5.1"/>
  <checksum type="sha" pkgid="YES">f9d7ceb6ce8f8d0f05396224cf16ed6fc4a55231</checksum>
  <summary>PHP LZF de/compression extension</summary>
  <description>
	 	This package handles LZF de/compression.
Authors:
---------
	marcin gibula &lt;mg@iceni.pl&gt;</description>
  <packager></packager>
  <url>http://pecl.php.net/</url>
  <time file="1625560445" build="1625560437"/>
  <size package="9850" installed="18792" archive="19496"/>
  <location href="x86_64/php5-lzf-1.6.5-5.1.x86_64.rpm"/>
  <format>
    <rpm:license>PHP</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Networking/Web/Servers</rpm:group>
    <rpm:buildhost>lamb04</rpm:buildhost>
    <rpm:sourcerpm>php5-lzf-1.6.5-5.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="2763"/>
    <rpm:provides>
      <rpm:entry name="php-lzf" flags="EQ" epoch="0" ver="1.6.5"/>
      <rpm:entry name="lzf.so()(64bit)"/>
      <rpm:entry name="php5-lzf" flags="EQ" epoch="0" ver="1.6.5" rel="5.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="php5" flags="EQ" epoch="0" ver="5.1.2"/>
      <rpm:entry name="libc.so.6(GLIBC_2.2.5)(64bit)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="php-lzf" flags="LT" epoch="0" ver="1.6.5"/>
    </rpm:obsoletes>
    <file>/etc/php5/conf.d/lzf.ini</file>
  </format>
</package>
<package type="rpm">
  <name>python-policyd-spf</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.3.2" rel="7.1"/>
  <checksum type="sha" pkgid="YES">26ab8754e61033c79c03a9ad9d13a59002dfb13b</checksum>
  <summary>This is a pure-Python Postfix policy daemon for SPF checking</summary>
  <description> python-policyd-spf is a Postfix SMTPd policy engine for SPF checking.
 It is implemented in pure Python and uses the python-spf module.  The SPF
 web site is http://www.openspf.org/.  The Postfix configuration must be
 changed to check SPF.  See man 1 python-policyd-spf for
 details.</description>
  <packager>Danilo Gode &lt;danilo.godec@agenda.si&gt;</packager>
  <url>http://www.openspf.org/Software</url>
  <time file="1625560124" build="1625560120"/>
  <size package="36530" installed="92049" archive="94824"/>
  <location href="noarch/python-policyd-spf-1.3.2-7.1.noarch.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>goat03</rpm:buildhost>
    <rpm:sourcerpm>python-policyd-spf-1.3.2-7.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4429"/>
    <rpm:provides>
      <rpm:entry name="python-policyd-spf" flags="EQ" epoch="0" ver="1.3.2" rel="7.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python" flags="GE" epoch="0" ver="2.4" pre="1"/>
      <rpm:entry name="python" flags="LT" epoch="0" ver="2.5" pre="1"/>
      <rpm:entry name="python-pyspf"/>
      <rpm:entry name="python-ipaddr"/>
      <rpm:entry name="postfix" flags="GE" epoch="0" ver="2.1"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/usr/bin/python"/>
    </rpm:requires>
    <file>/etc/policyd-spf</file>
    <file>/usr/bin/policyd-spf</file>
  </format>
</package>
<package type="rpm">
  <name>python-policyd-spf</name>
  <arch>src</arch>
  <version epoch="0" ver="1.3.2" rel="7.1"/>
  <checksum type="sha" pkgid="YES">237e7747f2096e9300df32fc3ef669be7bfa4ce5</checksum>
  <summary>This is a pure-Python Postfix policy daemon for SPF checking</summary>
  <description> python-policyd-spf is a Postfix SMTPd policy engine for SPF checking.
 It is implemented in pure Python and uses the python-spf module.  The SPF
 web site is http://www.openspf.org/.  The Postfix configuration must be
 changed to check SPF.  See man 1 python-policyd-spf for
 details.</description>
  <packager>Danilo Gode &lt;danilo.godec@agenda.si&gt;</packager>
  <url>http://www.openspf.org/Software</url>
  <time file="1625560124" build="1625560120"/>
  <size package="37521" installed="39049" archive="39596"/>
  <location href="src/python-policyd-spf-1.3.2-7.1.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>goat03</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2711"/>
    <rpm:requires>
      <rpm:entry name="python-devel"/>
      <rpm:entry name="coreutils"/>
      <rpm:entry name="pkgconfig"/>
      <rpm:entry name="python"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>python-pydns</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.3.6" rel="1.1"/>
  <checksum type="sha" pkgid="YES">f24cd80e39247260e365e3c6bdd79eb2da618627</checksum>
  <summary>PyDNS provides a module for performing DNS queries from python applications.</summary>
  <description>PyDNS provides a module for performing DNS queries from python applications.

Author:
--------
    Anthony Baxter &lt;anthony@interlink.com.au&gt;</description>
  <packager></packager>
  <url>http://pydns.sourceforge.net./</url>
  <time file="1625560321" build="1625560316"/>
  <size package="39007" installed="154140" archive="159576"/>
  <location href="i586/python-pydns-2.3.6-1.1.i586.rpm"/>
  <format>
    <rpm:license>Python Software Foundation License</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libaries/Python</rpm:group>
    <rpm:buildhost>goat09</rpm:buildhost>
    <rpm:sourcerpm>python-pydns-2.3.6-1.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5257"/>
    <rpm:provides>
      <rpm:entry name="python-pydns" flags="EQ" epoch="0" ver="2.3.6" rel="1.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python" flags="GE" epoch="0" ver="2.4" pre="1"/>
      <rpm:entry name="python" flags="LT" epoch="0" ver="2.5" pre="1"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>python-pydns</name>
  <arch>src</arch>
  <version epoch="0" ver="2.3.6" rel="1.1"/>
  <checksum type="sha" pkgid="YES">15dcc8223b7a16dca795cf10fdbf07e4a8414a27</checksum>
  <summary>PyDNS provides a module for performing DNS queries from python applications.</summary>
  <description>PyDNS provides a module for performing DNS queries from python applications.

Author:
--------
    Anthony Baxter &lt;anthony@interlink.com.au&gt;</description>
  <packager></packager>
  <url>http://pydns.sourceforge.net./</url>
  <time file="1625560906" build="1625560900"/>
  <size package="31534" installed="29724" archive="30108"/>
  <location href="src/python-pydns-2.3.6-1.1.src.rpm"/>
  <format>
    <rpm:license>Python Software Foundation License</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libaries/Python</rpm:group>
    <rpm:buildhost>lamb20</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2119"/>
    <rpm:requires>
      <rpm:entry name="python-devel"/>
      <rpm:entry name="python"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>python-pydns</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.3.6" rel="1.1"/>
  <checksum type="sha" pkgid="YES">541d8d3c6c4687f422b4d0b88d08921c546d1d82</checksum>
  <summary>PyDNS provides a module for performing DNS queries from python applications.</summary>
  <description>PyDNS provides a module for performing DNS queries from python applications.

Author:
--------
    Anthony Baxter &lt;anthony@interlink.com.au&gt;</description>
  <packager></packager>
  <url>http://pydns.sourceforge.net./</url>
  <time file="1625560906" build="1625560900"/>
  <size package="39008" installed="154176" archive="159644"/>
  <location href="x86_64/python-pydns-2.3.6-1.1.x86_64.rpm"/>
  <format>
    <rpm:license>Python Software Foundation License</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libaries/Python</rpm:group>
    <rpm:buildhost>lamb20</rpm:buildhost>
    <rpm:sourcerpm>python-pydns-2.3.6-1.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5245"/>
    <rpm:provides>
      <rpm:entry name="python-pydns" flags="EQ" epoch="0" ver="2.3.6" rel="1.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python" flags="GE" epoch="0" ver="2.4" pre="1"/>
      <rpm:entry name="python" flags="LT" epoch="0" ver="2.5" pre="1"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>rdiff-backup</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.2.8" rel="85.1"/>
  <checksum type="sha" pkgid="YES">87081b75c24311a197cfa31ce3bedb1dfd9db7ec</checksum>
  <summary>Convenient and transparent local/remote incremental mirror/backup</summary>
  <description>rdiff-backup backs up one directory to another, possibly over a
network. The target directory ends up a copy of the source directory,
but extra reverse diffs are stored in a special subdirectory of that
target directory, so you can still recover files lost some time ago.
The idea is to combine the best features of a mirror and an incremental
backup. rdiff-backup also preserves subdirectories, hard links, dev
files, permissions, uid/gid ownership, and modification times. Also,
rdiff-backup can operate in a bandwidth efficient manner over a pipe,
like rsync. Thus you can use rdiff-backup and ssh to securely back a
hard drive up to a remote location, and only the differences will be
transmitted. Finally, rdiff-backup is easy to use and settings have
sensical defaults.



Authors:
--------
    Ben Escoto &lt;ben@emerose.org&gt;</description>
  <packager></packager>
  <url>http://www.nongnu.org/rdiff-backup/</url>
  <time file="1625560818" build="1625560812"/>
  <size package="317106" installed="1169990" archive="1183880"/>
  <location href="i586/rdiff-backup-1.2.8-85.1.i586.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Archiving/Backup</rpm:group>
    <rpm:buildhost>lamb19</rpm:buildhost>
    <rpm:sourcerpm>rdiff-backup-1.2.8-85.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="13943"/>
    <rpm:provides>
      <rpm:entry name="C.so"/>
      <rpm:entry name="_librsync.so"/>
      <rpm:entry name="rdiff-backup" flags="EQ" epoch="0" ver="1.2.8" rel="85.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python" flags="GE" epoch="0" ver="2.4" pre="1"/>
      <rpm:entry name="python" flags="LT" epoch="0" ver="2.5" pre="1"/>
      <rpm:entry name="/usr/bin/python"/>
      <rpm:entry name="libpthread.so.0"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.0)"/>
      <rpm:entry name="librsync.so.1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)"/>
    </rpm:requires>
    <file>/usr/bin/rdiff-backup</file>
    <file>/usr/bin/rdiff-backup-statistics</file>
  </format>
</package>
<package type="rpm">
  <name>rdiff-backup</name>
  <arch>src</arch>
  <version epoch="0" ver="1.2.8" rel="85.1"/>
  <checksum type="sha" pkgid="YES">9499d44e25c132419b6449cd5841ca7239ce949e</checksum>
  <summary>Convenient and transparent local/remote incremental mirror/backup</summary>
  <description>rdiff-backup backs up one directory to another, possibly over a
network. The target directory ends up a copy of the source directory,
but extra reverse diffs are stored in a special subdirectory of that
target directory, so you can still recover files lost some time ago.
The idea is to combine the best features of a mirror and an incremental
backup. rdiff-backup also preserves subdirectories, hard links, dev
files, permissions, uid/gid ownership, and modification times. Also,
rdiff-backup can operate in a bandwidth efficient manner over a pipe,
like rsync. Thus you can use rdiff-backup and ssh to securely back a
hard drive up to a remote location, and only the differences will be
transmitted. Finally, rdiff-backup is easy to use and settings have
sensical defaults.



Authors:
--------
    Ben Escoto &lt;ben@emerose.org&gt;</description>
  <packager></packager>
  <url>http://www.nongnu.org/rdiff-backup/</url>
  <time file="1625560974" build="1625560969"/>
  <size package="170560" installed="170495" archive="171308"/>
  <location href="src/rdiff-backup-1.2.8-85.1.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Archiving/Backup</rpm:group>
    <rpm:buildhost>old-atreju4</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="6579"/>
    <rpm:requires>
      <rpm:entry name="librsync"/>
      <rpm:entry name="python-devel"/>
      <rpm:entry name="python"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>rdiff-backup</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.2.8" rel="85.1"/>
  <checksum type="sha" pkgid="YES">877871d8ce36d35ac884b807f2e3f1f72d4976e1</checksum>
  <summary>Convenient and transparent local/remote incremental mirror/backup</summary>
  <description>rdiff-backup backs up one directory to another, possibly over a
network. The target directory ends up a copy of the source directory,
but extra reverse diffs are stored in a special subdirectory of that
target directory, so you can still recover files lost some time ago.
The idea is to combine the best features of a mirror and an incremental
backup. rdiff-backup also preserves subdirectories, hard links, dev
files, permissions, uid/gid ownership, and modification times. Also,
rdiff-backup can operate in a bandwidth efficient manner over a pipe,
like rsync. Thus you can use rdiff-backup and ssh to securely back a
hard drive up to a remote location, and only the differences will be
transmitted. Finally, rdiff-backup is easy to use and settings have
sensical defaults.



Authors:
--------
    Ben Escoto &lt;ben@emerose.org&gt;</description>
  <packager></packager>
  <url>http://www.nongnu.org/rdiff-backup/</url>
  <time file="1625560974" build="1625560969"/>
  <size package="318623" installed="1184288" archive="1198284"/>
  <location href="x86_64/rdiff-backup-1.2.8-85.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Archiving/Backup</rpm:group>
    <rpm:buildhost>old-atreju4</rpm:buildhost>
    <rpm:sourcerpm>rdiff-backup-1.2.8-85.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="13963"/>
    <rpm:provides>
      <rpm:entry name="C.so()(64bit)"/>
      <rpm:entry name="_librsync.so()(64bit)"/>
      <rpm:entry name="rdiff-backup" flags="EQ" epoch="0" ver="1.2.8" rel="85.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python" flags="GE" epoch="0" ver="2.4" pre="1"/>
      <rpm:entry name="python" flags="LT" epoch="0" ver="2.5" pre="1"/>
      <rpm:entry name="/usr/bin/python"/>
      <rpm:entry name="libpthread.so.0()(64bit)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="librsync.so.1()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/rdiff-backup</file>
    <file>/usr/bin/rdiff-backup-statistics</file>
  </format>
</package>
<package type="rpm">
  <name>rkhunter</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.4.6" rel="2.1"/>
  <checksum type="sha" pkgid="YES">a7c775f8e0485f921501a25c98c871ee8b7a46de</checksum>
  <summary>Rootkit Hunter Scans for Rootkits, Backdoors, and Local Exploits</summary>
  <description>Rootkit Hunter scans files and systems for known and unknown rootkits,
backdoors, and sniffers.  The package contains one shell script, a few
text-based databases, and optional Perl modules. This tool scans for
rootkits, backdoors, and local exploits by running tests like:

* Comparing MD5 hashes

* Looking for default files used by rootkits

* Checking for wrong file permissions for binaries

* Looking for suspected strings in LKM and KLD modules

* Looking for hidden files

* Optionally scanning within plain text and binary files

* Checking software versions

* Testing applications</description>
  <packager></packager>
  <url>http://rkhunter.sourceforge.net/</url>
  <time file="1666685736" build="1666685733"/>
  <size package="245956" installed="1144996" archive="1153296"/>
  <location href="i586/rkhunter-1.4.6-2.1.i586.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System/Monitoring</rpm:group>
    <rpm:buildhost>sheep84</rpm:buildhost>
    <rpm:sourcerpm>rkhunter-1.4.6-2.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="18276"/>
    <rpm:provides>
      <rpm:entry name="rkhunter" flags="EQ" epoch="0" ver="1.4.6" rel="2.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="fillup" pre="1"/>
      <rpm:entry name="coreutils" pre="1"/>
      <rpm:entry name="bash"/>
      <rpm:entry name="cron"/>
      <rpm:entry name="findutils"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/perl"/>
    </rpm:requires>
    <rpm:recommends>
      <rpm:entry name="logrotate"/>
      <rpm:entry name="netcfg"/>
      <rpm:entry name="wget"/>
    </rpm:recommends>
    <file>/etc/cron.daily/suse.de-rkhunter</file>
    <file>/etc/logrotate.d/rkhunter</file>
    <file>/etc/rkhunter.conf</file>
    <file type="dir">/etc/rkhunter.d</file>
    <file>/etc/rkhunter.d/00-opensuse.conf</file>
    <file>/usr/bin/rkhunter</file>
  </format>
</package>
<package type="rpm">
  <name>rkhunter</name>
  <arch>src</arch>
  <version epoch="0" ver="1.4.6" rel="2.1"/>
  <checksum type="sha" pkgid="YES">37edf40f5c440d7e0f1e9ce5d78495c10a33ca9c</checksum>
  <summary>Rootkit Hunter Scans for Rootkits, Backdoors, and Local Exploits</summary>
  <description>Rootkit Hunter scans files and systems for known and unknown rootkits,
backdoors, and sniffers.  The package contains one shell script, a few
text-based databases, and optional Perl modules. This tool scans for
rootkits, backdoors, and local exploits by running tests like:

* Comparing MD5 hashes

* Looking for default files used by rootkits

* Checking for wrong file permissions for binaries

* Looking for suspected strings in LKM and KLD modules

* Looking for hidden files

* Optionally scanning within plain text and binary files

* Checking software versions

* Testing applications</description>
  <packager></packager>
  <url>http://rkhunter.sourceforge.net/</url>
  <time file="1666685769" build="1666685766"/>
  <size package="322960" installed="324123" archive="325176"/>
  <location href="src/rkhunter-1.4.6-2.1.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System/Monitoring</rpm:group>
    <rpm:buildhost>lamb54</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="11548"/>
    <rpm:requires>
      <rpm:entry name="wget"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>rkhunter</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.4.6" rel="2.1"/>
  <checksum type="sha" pkgid="YES">b4fa3681d949fc2bf174f9d87f050d5039bd15c1</checksum>
  <summary>Rootkit Hunter Scans for Rootkits, Backdoors, and Local Exploits</summary>
  <description>Rootkit Hunter scans files and systems for known and unknown rootkits,
backdoors, and sniffers.  The package contains one shell script, a few
text-based databases, and optional Perl modules. This tool scans for
rootkits, backdoors, and local exploits by running tests like:

* Comparing MD5 hashes

* Looking for default files used by rootkits

* Checking for wrong file permissions for binaries

* Looking for suspected strings in LKM and KLD modules

* Looking for hidden files

* Optionally scanning within plain text and binary files

* Checking software versions

* Testing applications</description>
  <packager></packager>
  <url>http://rkhunter.sourceforge.net/</url>
  <time file="1666685769" build="1666685766"/>
  <size package="245410" installed="1144998" archive="1153304"/>
  <location href="x86_64/rkhunter-1.4.6-2.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System/Monitoring</rpm:group>
    <rpm:buildhost>lamb54</rpm:buildhost>
    <rpm:sourcerpm>rkhunter-1.4.6-2.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="18260"/>
    <rpm:provides>
      <rpm:entry name="rkhunter" flags="EQ" epoch="0" ver="1.4.6" rel="2.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="fillup" pre="1"/>
      <rpm:entry name="coreutils" pre="1"/>
      <rpm:entry name="bash"/>
      <rpm:entry name="cron"/>
      <rpm:entry name="findutils"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/perl"/>
    </rpm:requires>
    <rpm:recommends>
      <rpm:entry name="logrotate"/>
      <rpm:entry name="netcfg"/>
      <rpm:entry name="wget"/>
    </rpm:recommends>
    <file>/etc/cron.daily/suse.de-rkhunter</file>
    <file>/etc/logrotate.d/rkhunter</file>
    <file>/etc/rkhunter.conf</file>
    <file type="dir">/etc/rkhunter.d</file>
    <file>/etc/rkhunter.d/00-opensuse.conf</file>
    <file>/usr/bin/rkhunter</file>
  </format>
</package>
<package type="rpm">
  <name>shc</name>
  <arch>i586</arch>
  <version epoch="0" ver="3.8.9" rel="1.1"/>
  <checksum type="sha" pkgid="YES">89210dfccb62d128bf49e27717fccc51d4800663</checksum>
  <summary>Generic Shell Script Compiler</summary>
  <description>Shc takes a script, which is specified on the command line and
produces C source code. The generated source code is then compiled
and linked to produce a stripped binary executable. Use with care.</description>
  <packager></packager>
  <url>http://www.datsi.fi.upm.es/~frosal/</url>
  <time file="1625560299" build="1625560292"/>
  <size package="27661" installed="56156" archive="57140"/>
  <location href="i586/shc-3.8.9-1.1.i586.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Tools/Other</rpm:group>
    <rpm:buildhost>lamb54</rpm:buildhost>
    <rpm:sourcerpm>shc-3.8.9-1.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="2838"/>
    <rpm:provides>
      <rpm:entry name="shc" flags="EQ" epoch="0" ver="3.8.9" rel="1.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)"/>
    </rpm:requires>
    <file>/usr/bin/shc</file>
  </format>
</package>
<package type="rpm">
  <name>shc</name>
  <arch>src</arch>
  <version epoch="0" ver="3.8.9" rel="1.1"/>
  <checksum type="sha" pkgid="YES">707d970af1edb0637b500530008db245b3247a91</checksum>
  <summary>Generic Shell Script Compiler</summary>
  <description>Shc takes a script, which is specified on the command line and
produces C source code. The generated source code is then compiled
and linked to produce a stripped binary executable. Use with care.</description>
  <packager></packager>
  <url>http://www.datsi.fi.upm.es/~frosal/</url>
  <time file="1625560742" build="1625560733"/>
  <size package="23867" installed="22292" archive="22660"/>
  <location href="src/shc-3.8.9-1.1.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Tools/Other</rpm:group>
    <rpm:buildhost>lamb01</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2016"/>
  </format>
</package>
<package type="rpm">
  <name>shc</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="3.8.9" rel="1.1"/>
  <checksum type="sha" pkgid="YES">e234b353960b5b5454b686dd2828e4bd38534927</checksum>
  <summary>Generic Shell Script Compiler</summary>
  <description>Shc takes a script, which is specified on the command line and
produces C source code. The generated source code is then compiled
and linked to produce a stripped binary executable. Use with care.</description>
  <packager></packager>
  <url>http://www.datsi.fi.upm.es/~frosal/</url>
  <time file="1625560742" build="1625560733"/>
  <size package="28764" installed="62158" archive="63140"/>
  <location href="x86_64/shc-3.8.9-1.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Tools/Other</rpm:group>
    <rpm:buildhost>lamb01</rpm:buildhost>
    <rpm:sourcerpm>shc-3.8.9-1.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="2830"/>
    <rpm:provides>
      <rpm:entry name="shc" flags="EQ" epoch="0" ver="3.8.9" rel="1.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/shc</file>
  </format>
</package>
<package type="rpm">
  <name>snappy</name>
  <arch>src</arch>
  <version epoch="0" ver="1.1.2" rel="11.1"/>
  <checksum type="sha" pkgid="YES">e8a715ee6f5878124e16400f71ccb6bcdd3fbcc6</checksum>
  <summary>A fast compressor/decompressor library</summary>
  <description>Snappy is a compression/decompression library. It does not aim for maximum
compression, or compatibility with any other compression library; instead, it
aims for very high speeds and reasonable compression. For instance, compared to
the fastest mode of zlib, Snappy is an order of magnitude faster for most
inputs, but the resulting compressed files are anywhere from 20% to 100%
bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy
compresses at about 250 MB/sec or more and decompresses at about
500 MB/sec or more.</description>
  <packager></packager>
  <url>http://code.google.com/p/snappy/</url>
  <time file="1625560158" build="1625560153"/>
  <size package="1497942" installed="1510774" archive="1511296"/>
  <location href="src/snappy-1.1.2-11.1.src.rpm"/>
  <format>
    <rpm:license>BSD-3-Clause</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>goat11</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="4339"/>
    <rpm:requires>
      <rpm:entry name="gcc-c++"/>
      <rpm:entry name="lzo-devel"/>
      <rpm:entry name="zlib-devel"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>snappy-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.1.2" rel="11.1"/>
  <checksum type="sha" pkgid="YES">4398cb5491175ff6245490e3bfc6f2d69c89faac</checksum>
  <summary>Development files for snappy</summary>
  <description>Snappy is a compression/decompression library. It does not aim for maximum
compression, or compatibility with any other compression library; instead, it
aims for very high speeds and reasonable compression. For instance, compared to
the fastest mode of zlib, Snappy is an order of magnitude faster for most
inputs, but the resulting compressed files are anywhere from 20% to 100%
bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy
compresses at about 250 MB/sec or more and decompresses at about
500 MB/sec or more.

This package holds the development files for snappy.</description>
  <packager></packager>
  <url>http://code.google.com/p/snappy/</url>
  <time file="1625560160" build="1625560156"/>
  <size package="39062" installed="147299" archive="146428"/>
  <location href="i586/snappy-devel-1.1.2-11.1.i586.rpm"/>
  <format>
    <rpm:license>BSD-3-Clause</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>lamb20</rpm:buildhost>
    <rpm:sourcerpm>snappy-1.1.2-11.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5383"/>
    <rpm:provides>
      <rpm:entry name="snappy-devel" flags="EQ" epoch="0" ver="1.1.2" rel="11.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libsnappy1" flags="EQ" epoch="0" ver="1.1.2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>snappy-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.1.2" rel="11.1"/>
  <checksum type="sha" pkgid="YES">75a978acbe309da0c306f1a75813948917bd68c6</checksum>
  <summary>Development files for snappy</summary>
  <description>Snappy is a compression/decompression library. It does not aim for maximum
compression, or compatibility with any other compression library; instead, it
aims for very high speeds and reasonable compression. For instance, compared to
the fastest mode of zlib, Snappy is an order of magnitude faster for most
inputs, but the resulting compressed files are anywhere from 20% to 100%
bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy
compresses at about 250 MB/sec or more and decompresses at about
500 MB/sec or more.

This package holds the development files for snappy.</description>
  <packager></packager>
  <url>http://code.google.com/p/snappy/</url>
  <time file="1625560158" build="1625560153"/>
  <size package="38986" installed="147299" archive="146428"/>
  <location href="x86_64/snappy-devel-1.1.2-11.1.x86_64.rpm"/>
  <format>
    <rpm:license>BSD-3-Clause</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>goat11</rpm:buildhost>
    <rpm:sourcerpm>snappy-1.1.2-11.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5369"/>
    <rpm:provides>
      <rpm:entry name="snappy-devel" flags="EQ" epoch="0" ver="1.1.2" rel="11.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libsnappy1" flags="EQ" epoch="0" ver="1.1.2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>stenc</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.0.7" rel="3.1"/>
  <checksum type="sha" pkgid="YES">94d58fb0f51b63d0574028dd06b86aa60062b637</checksum>
  <summary>SCSI Tape Encryption Manager</summary>
  <description>SCSI Tape Encryption Manager - Manages encryption on LTO 4 and LTO 5 tape
drives with hardware-based encryption.  Program should work on any other SSP
capable tape drives.  Built specifically for Linux and AIX.  Now supports
key change auditing and key descriptors (uKAD).  Check the Project News
under the Develop section for more information.</description>
  <packager></packager>
  <url>https://sourceforge.net/projects/stenc/</url>
  <time file="1625560590" build="1625560584"/>
  <size package="35354" installed="69963" archive="70364"/>
  <location href="i586/stenc-1.0.7-3.1.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Archiving/Backup</rpm:group>
    <rpm:buildhost>old-atreju3</rpm:buildhost>
    <rpm:sourcerpm>stenc-1.0.7-3.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="2747"/>
    <rpm:provides>
      <rpm:entry name="stenc" flags="EQ" epoch="0" ver="1.0.7" rel="3.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libstdc++.so.6"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.1.3)"/>
    </rpm:requires>
    <file>/usr/bin/stenc</file>
  </format>
</package>
<package type="rpm">
  <name>stenc</name>
  <arch>src</arch>
  <version epoch="0" ver="1.0.7" rel="3.1"/>
  <checksum type="sha" pkgid="YES">57e96dff477bfe125f325f59d00bd03e10f03075</checksum>
  <summary>SCSI Tape Encryption Manager</summary>
  <description>SCSI Tape Encryption Manager - Manages encryption on LTO 4 and LTO 5 tape
drives with hardware-based encryption.  Program should work on any other SSP
capable tape drives.  Built specifically for Linux and AIX.  Now supports
key change auditing and key descriptors (uKAD).  Check the Project News
under the Develop section for more information.</description>
  <packager></packager>
  <url>https://sourceforge.net/projects/stenc/</url>
  <time file="1625560679" build="1625560671"/>
  <size package="110664" installed="108885" archive="109268"/>
  <location href="src/stenc-1.0.7-3.1.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Archiving/Backup</rpm:group>
    <rpm:buildhost>lamb55</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2201"/>
    <rpm:requires>
      <rpm:entry name="gcc-c++"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>stenc</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.0.7" rel="3.1"/>
  <checksum type="sha" pkgid="YES">d6082731c29701e7ff90d8b8b970afc089490817</checksum>
  <summary>SCSI Tape Encryption Manager</summary>
  <description>SCSI Tape Encryption Manager - Manages encryption on LTO 4 and LTO 5 tape
drives with hardware-based encryption.  Program should work on any other SSP
capable tape drives.  Built specifically for Linux and AIX.  Now supports
key change auditing and key descriptors (uKAD).  Check the Project News
under the Develop section for more information.</description>
  <packager></packager>
  <url>https://sourceforge.net/projects/stenc/</url>
  <time file="1625560679" build="1625560671"/>
  <size package="36428" installed="77407" archive="77808"/>
  <location href="x86_64/stenc-1.0.7-3.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Archiving/Backup</rpm:group>
    <rpm:buildhost>lamb55</rpm:buildhost>
    <rpm:sourcerpm>stenc-1.0.7-3.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="2759"/>
    <rpm:provides>
      <rpm:entry name="stenc" flags="EQ" epoch="0" ver="1.0.7" rel="3.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libgcc_s.so.1()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.2.5)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/stenc</file>
  </format>
</package>
<package type="rpm">
  <name>stress</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.0.4" rel="6.1"/>
  <checksum type="sha" pkgid="YES">6d9a6d9c72c7c640fa5f02e97345c43d784b0ea0</checksum>
  <summary>Imposes a configurable Amount of Load on your System</summary>
  <description>stress is a simple tool that imposes a configurable amount of CPU, memory,
I/O, and disk stress on POSIX-compliant operating systems. It is written in
portable ANSI C, and uses the GNU Autotools to compile on most UNIX-like
operating systems.

stress is not a benchmark. It is a tool used by system administrators to
evaluate how well their systems will scale, by kernel programmers to evaluate
perceived performance characteristics, and by systems programmers to expose
the classes of bugs which only or more frequently manifest themselves when the
system is under heavy load.</description>
  <packager></packager>
  <url>http://weather.ou.edu/~apw/projects/stress/</url>
  <time file="1625560845" build="1625560837"/>
  <size package="31695" installed="75888" archive="77352"/>
  <location href="i586/stress-1.0.4-6.1.i586.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System/Benchmark</rpm:group>
    <rpm:buildhost>lamb01</rpm:buildhost>
    <rpm:sourcerpm>stress-1.0.4-6.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5392"/>
    <rpm:provides>
      <rpm:entry name="stress" flags="EQ" epoch="0" ver="1.0.4" rel="6.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libm.so.6(GLIBC_2.0)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)"/>
    </rpm:requires>
    <file>/usr/bin/stress</file>
  </format>
</package>
<package type="rpm">
  <name>stress</name>
  <arch>src</arch>
  <version epoch="0" ver="1.0.4" rel="6.1"/>
  <checksum type="sha" pkgid="YES">4d01ed9ac06e8b231da540f2a2e3ab3123eac549</checksum>
  <summary>Imposes a configurable Amount of Load on your System</summary>
  <description>stress is a simple tool that imposes a configurable amount of CPU, memory,
I/O, and disk stress on POSIX-compliant operating systems. It is written in
portable ANSI C, and uses the GNU Autotools to compile on most UNIX-like
operating systems.

stress is not a benchmark. It is a tool used by system administrators to
evaluate how well their systems will scale, by kernel programmers to evaluate
perceived performance characteristics, and by systems programmers to expose
the classes of bugs which only or more frequently manifest themselves when the
system is under heavy load.</description>
  <packager></packager>
  <url>http://weather.ou.edu/~apw/projects/stress/</url>
  <time file="1625560949" build="1625560943"/>
  <size package="202958" installed="200556" archive="201068"/>
  <location href="src/stress-1.0.4-6.1.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System/Benchmark</rpm:group>
    <rpm:buildhost>sheep85</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="4481"/>
    <rpm:requires>
      <rpm:entry name="autoconf"/>
      <rpm:entry name="automake"/>
      <rpm:entry name="gcc"/>
      <rpm:entry name="glibc-devel"/>
      <rpm:entry name="libtool"/>
      <rpm:entry name="make"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>stress</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.0.4" rel="6.1"/>
  <checksum type="sha" pkgid="YES">d41a4199958754f48b117500e5c69402fde1b198</checksum>
  <summary>Imposes a configurable Amount of Load on your System</summary>
  <description>stress is a simple tool that imposes a configurable amount of CPU, memory,
I/O, and disk stress on POSIX-compliant operating systems. It is written in
portable ANSI C, and uses the GNU Autotools to compile on most UNIX-like
operating systems.

stress is not a benchmark. It is a tool used by system administrators to
evaluate how well their systems will scale, by kernel programmers to evaluate
perceived performance characteristics, and by systems programmers to expose
the classes of bugs which only or more frequently manifest themselves when the
system is under heavy load.</description>
  <packager></packager>
  <url>http://weather.ou.edu/~apw/projects/stress/</url>
  <time file="1625560949" build="1625560943"/>
  <size package="31832" installed="76371" archive="77832"/>
  <location href="x86_64/stress-1.0.4-6.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>System/Benchmark</rpm:group>
    <rpm:buildhost>sheep85</rpm:buildhost>
    <rpm:sourcerpm>stress-1.0.4-6.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="5404"/>
    <rpm:provides>
      <rpm:entry name="stress" flags="EQ" epoch="0" ver="1.0.4" rel="6.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/stress</file>
  </format>
</package>
<package type="rpm">
  <name>tmpwatch</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.11" rel="8.1"/>
  <checksum type="sha" pkgid="YES">844b6d75ec55f825941d1fc6f45a081deafb4ff8</checksum>
  <summary>Watches file system activity, such as /tmp files</summary>
  <description>The tmpwatch utility recursively searches through specified directories
and removes files which have not been accessed in a specified period of
time. tmpwatch is normally used to clean up directories which are used
for temporarily holding files (for example, /tmp).

There are multiple tools called "tmpwatch", this package contains the
Fedora/Red Hat version available at https://fedorahosted.org/tmpwatch</description>
  <packager></packager>
  <url>https://fedorahosted.org/tmpwatch</url>
  <time file="1625560119" build="1625560113"/>
  <size package="30738" installed="60156" archive="61464"/>
  <location href="i586/tmpwatch-2.11-8.1.i586.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Security</rpm:group>
    <rpm:buildhost>lamb18</rpm:buildhost>
    <rpm:sourcerpm>tmpwatch-2.11-8.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4401"/>
    <rpm:provides>
      <rpm:entry name="tmpwatch" flags="EQ" epoch="0" ver="2.11" rel="8.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="cron"/>
      <rpm:entry name="psmisc"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="librt.so.1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
    <file>/etc/cron.daily/tmpwatch</file>
    <file>/usr/sbin/tmpwatch</file>
  </format>
</package>
<package type="rpm">
  <name>tmpwatch</name>
  <arch>src</arch>
  <version epoch="0" ver="2.11" rel="8.1"/>
  <checksum type="sha" pkgid="YES">dcb345d948f74e617b4920d78d22a56a2c070d26</checksum>
  <summary>Watches file system activity, such as /tmp files</summary>
  <description>The tmpwatch utility recursively searches through specified directories
and removes files which have not been accessed in a specified period of
time. tmpwatch is normally used to clean up directories which are used
for temporarily holding files (for example, /tmp).

There are multiple tools called "tmpwatch", this package contains the
Fedora/Red Hat version available at https://fedorahosted.org/tmpwatch</description>
  <packager></packager>
  <url>https://fedorahosted.org/tmpwatch</url>
  <time file="1625560968" build="1625560960"/>
  <size package="151064" installed="149278" archive="149792"/>
  <location href="src/tmpwatch-2.11-8.1.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Security</rpm:group>
    <rpm:buildhost>lamb04</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="3405"/>
    <rpm:requires>
      <rpm:entry name="psmisc"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>tmpwatch</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.11" rel="8.1"/>
  <checksum type="sha" pkgid="YES">464162d9341171a21e18732b30d2bc3aff29c794</checksum>
  <summary>Watches file system activity, such as /tmp files</summary>
  <description>The tmpwatch utility recursively searches through specified directories
and removes files which have not been accessed in a specified period of
time. tmpwatch is normally used to clean up directories which are used
for temporarily holding files (for example, /tmp).

There are multiple tools called "tmpwatch", this package contains the
Fedora/Red Hat version available at https://fedorahosted.org/tmpwatch</description>
  <packager></packager>
  <url>https://fedorahosted.org/tmpwatch</url>
  <time file="1625560968" build="1625560960"/>
  <size package="31982" installed="66191" archive="67496"/>
  <location href="x86_64/tmpwatch-2.11-8.1.x86_64.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Security</rpm:group>
    <rpm:buildhost>lamb04</rpm:buildhost>
    <rpm:sourcerpm>tmpwatch-2.11-8.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4349"/>
    <rpm:provides>
      <rpm:entry name="tmpwatch" flags="EQ" epoch="0" ver="2.11" rel="8.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="cron"/>
      <rpm:entry name="psmisc"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="librt.so.1()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)(64bit)"/>
    </rpm:requires>
    <file>/etc/cron.daily/tmpwatch</file>
    <file>/usr/sbin/tmpwatch</file>
  </format>
</package>
<package type="rpm">
  <name>tripwire</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.4.2.2" rel="1.1"/>
  <checksum type="sha" pkgid="YES">43eaad5de0d087d0dad0742a0a19eabf4cbd0401</checksum>
  <summary>A tool to observe the filesystem</summary>
  <description>By the use of tripwire it is possible to observe the filesystem.
tripwire generates a database, controlled by a configuration file, of
all files, their checksums, etc. and it reports changes. The location
of the binaries is /usr/sbin. An example of the policy file can be
found at /usr/share/doc/packages/tripwire. Tripwire wants its
configurationfile to be found at /etc/tw.config. The database has to be
saved at /etc/tw.



Authors:
--------
    Gene Kim &lt;gkim@cs.purdue.edu&gt;
    Gene Spafford &lt;spaf@cs.purdue.edu&gt;</description>
  <packager></packager>
  <url></url>
  <time file="1625560647" build="1625560642"/>
  <size package="2065574" installed="5994817" archive="5999744"/>
  <location href="i586/tripwire-2.4.2.2-1.1.i586.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Security</rpm:group>
    <rpm:buildhost>goat01</rpm:buildhost>
    <rpm:sourcerpm>tripwire-2.4.2.2-1.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="7783"/>
    <rpm:provides>
      <rpm:entry name="Tripwire"/>
      <rpm:entry name="tripwire" flags="EQ" epoch="0" ver="2.4.2.2" rel="1.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)"/>
      <rpm:entry name="libgcc_s.so.1(GLIBC_2.0)"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libm.so.6(GLIBC_2.0)"/>
      <rpm:entry name="libstdc++.so.6"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3.1)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.1.3)"/>
    </rpm:requires>
    <file type="dir">/etc/tripwire</file>
    <file>/etc/tripwire/twcfg.txt</file>
    <file>/usr/sbin/siggen</file>
    <file>/usr/sbin/tripwire</file>
    <file>/usr/sbin/twadmin</file>
    <file>/usr/sbin/twprint</file>
  </format>
</package>
<package type="rpm">
  <name>tripwire</name>
  <arch>src</arch>
  <version epoch="0" ver="2.4.2.2" rel="1.1"/>
  <checksum type="sha" pkgid="YES">f91353aeb4ca5e2667108f3bcabcffed3e8c88b5</checksum>
  <summary>A tool to observe the filesystem</summary>
  <description>By the use of tripwire it is possible to observe the filesystem.
tripwire generates a database, controlled by a configuration file, of
all files, their checksums, etc. and it reports changes. The location
of the binaries is /usr/sbin. An example of the policy file can be
found at /usr/share/doc/packages/tripwire. Tripwire wants its
configurationfile to be found at /etc/tw.config. The database has to be
saved at /etc/tw.



Authors:
--------
    Gene Kim &lt;gkim@cs.purdue.edu&gt;
    Gene Spafford &lt;spaf@cs.purdue.edu&gt;</description>
  <packager></packager>
  <url></url>
  <time file="1625560378" build="1625560373"/>
  <size package="726833" installed="726612" archive="727832"/>
  <location href="src/tripwire-2.4.2.2-1.1.src.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Security</rpm:group>
    <rpm:buildhost>goat19</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="5207"/>
    <rpm:requires>
      <rpm:entry name="gcc-c++"/>
      <rpm:entry name="libstdc++-devel"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>tripwire</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.2.2" rel="1.1"/>
  <checksum type="sha" pkgid="YES">6997acc37556fd83fef639f987a943d37ee14eb6</checksum>
  <summary>A tool to observe the filesystem</summary>
  <description>By the use of tripwire it is possible to observe the filesystem.
tripwire generates a database, controlled by a configuration file, of
all files, their checksums, etc. and it reports changes. The location
of the binaries is /usr/sbin. An example of the policy file can be
found at /usr/share/doc/packages/tripwire. Tripwire wants its
configurationfile to be found at /etc/tw.config. The database has to be
saved at /etc/tw.



Authors:
--------
    Gene Kim &lt;gkim@cs.purdue.edu&gt;
    Gene Spafford &lt;spaf@cs.purdue.edu&gt;</description>
  <packager></packager>
  <url></url>
  <time file="1625560378" build="1625560373"/>
  <size package="2142445" installed="6340753" archive="6345676"/>
  <location href="x86_64/tripwire-2.4.2.2-1.1.x86_64.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Security</rpm:group>
    <rpm:buildhost>goat19</rpm:buildhost>
    <rpm:sourcerpm>tripwire-2.4.2.2-1.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="7763"/>
    <rpm:provides>
      <rpm:entry name="Tripwire"/>
      <rpm:entry name="tripwire" flags="EQ" epoch="0" ver="2.4.2.2" rel="1.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libgcc_s.so.1()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libstdc++.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3.1)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.2.5)(64bit)"/>
    </rpm:requires>
    <file type="dir">/etc/tripwire</file>
    <file>/etc/tripwire/twcfg.txt</file>
    <file>/usr/sbin/siggen</file>
    <file>/usr/sbin/tripwire</file>
    <file>/usr/sbin/twadmin</file>
    <file>/usr/sbin/twprint</file>
  </format>
</package>
<package type="rpm">
  <name>unrtf</name>
  <arch>i586</arch>
  <version epoch="0" ver="0.21.2" rel="4.2"/>
  <checksum type="sha" pkgid="YES">f8b405f622206fcad78e27fbf8f95d11faf1113c</checksum>
  <summary>UnRTF - converter from RTF to other formats</summary>
  <description>The program unrtf is a converter from Rich Text Format (RTF) to a
growing number of document formats. At present it supports HyperText
Markup Language (HTML), plain text, text with VT100 codes, and LaTeX.
All output formats except HTML are \"alpha\" i.e. limited and
development has just begun. However with HTML, the program supports
tables, fonts, hyperlinks, and paragraph alignment. Font support
includes face and size changes, as well as typical attributes such as
italic, bold, underlining, strikethrough, smallcaps, allcaps, expand,
compress and both foreground and background colors. Images are always
stored to separate files in the current directory, or they can be
ignored.</description>
  <packager></packager>
  <url>http://www.gnu.org/software/unrtf/unrtf.html</url>
  <time file="1625560240" build="1625560234"/>
  <size package="67527" installed="176901" archive="180120"/>
  <location href="i586/unrtf-0.21.2-4.2.i586.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/System</rpm:group>
    <rpm:buildhost>lamb20</rpm:buildhost>
    <rpm:sourcerpm>unrtf-0.21.2-4.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4642"/>
    <rpm:provides>
      <rpm:entry name="unrtf" flags="EQ" epoch="0" ver="0.21.2" rel="4.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)"/>
    </rpm:requires>
    <file>/usr/bin/unrtf</file>
  </format>
</package>
<package type="rpm">
  <name>unrtf</name>
  <arch>src</arch>
  <version epoch="0" ver="0.21.2" rel="4.2"/>
  <checksum type="sha" pkgid="YES">f06f58662323f0e178b2866042784c020056e5ce</checksum>
  <summary>UnRTF - converter from RTF to other formats</summary>
  <description>The program unrtf is a converter from Rich Text Format (RTF) to a
growing number of document formats. At present it supports HyperText
Markup Language (HTML), plain text, text with VT100 codes, and LaTeX.
All output formats except HTML are \"alpha\" i.e. limited and
development has just begun. However with HTML, the program supports
tables, fonts, hyperlinks, and paragraph alignment. Font support
includes face and size changes, as well as typical attributes such as
italic, bold, underlining, strikethrough, smallcaps, allcaps, expand,
compress and both foreground and background colors. Images are always
stored to separate files in the current directory, or they can be
ignored.</description>
  <packager></packager>
  <url>http://www.gnu.org/software/unrtf/unrtf.html</url>
  <time file="1625560319" build="1625560310"/>
  <size package="619329" installed="620105" archive="620488"/>
  <location href="src/unrtf-0.21.2-4.2.src.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/System</rpm:group>
    <rpm:buildhost>old-atreju5</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="2538"/>
  </format>
</package>
<package type="rpm">
  <name>unrtf</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="0.21.2" rel="4.2"/>
  <checksum type="sha" pkgid="YES">62431abd3c3b68770c6d63cd226f8b80274fe283</checksum>
  <summary>UnRTF - converter from RTF to other formats</summary>
  <description>The program unrtf is a converter from Rich Text Format (RTF) to a
growing number of document formats. At present it supports HyperText
Markup Language (HTML), plain text, text with VT100 codes, and LaTeX.
All output formats except HTML are \"alpha\" i.e. limited and
development has just begun. However with HTML, the program supports
tables, fonts, hyperlinks, and paragraph alignment. Font support
includes face and size changes, as well as typical attributes such as
italic, bold, underlining, strikethrough, smallcaps, allcaps, expand,
compress and both foreground and background colors. Images are always
stored to separate files in the current directory, or they can be
ignored.</description>
  <packager></packager>
  <url>http://www.gnu.org/software/unrtf/unrtf.html</url>
  <time file="1625560319" build="1625560310"/>
  <size package="72624" installed="189449" archive="192680"/>
  <location href="x86_64/unrtf-0.21.2-4.2.x86_64.rpm"/>
  <format>
    <rpm:license>GPL</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Applications/System</rpm:group>
    <rpm:buildhost>old-atreju5</rpm:buildhost>
    <rpm:sourcerpm>unrtf-0.21.2-4.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="4646"/>
    <rpm:provides>
      <rpm:entry name="unrtf" flags="EQ" epoch="0" ver="0.21.2" rel="4.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libc.so.6(GLIBC_2.3.4)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/unrtf</file>
  </format>
</package>
<package type="rpm">
  <name>webacula</name>
  <arch>noarch</arch>
  <version epoch="0" ver="5.5.1" rel="2.2"/>
  <checksum type="sha" pkgid="YES">2e3c176c77545117ebf92973d53c35b402a07e9e</checksum>
  <summary>Web interface of a Bacula backup system</summary>
  <description>Webacula - Web Bacula - web interface of a Bacula backup system.
Supports the run Job, restore all files or selected files,
restore the most recent backup for a client,
restore backup for a client before a specified time,
mount/umount Storages, show scheduled, running and terminated Jobs and more.
Supported languages: English, French, German, Italian,
Portuguese Brazil, Russian.</description>
  <packager></packager>
  <url>http://webacula.sourceforge.net/</url>
  <time file="1625560496" build="1625560490"/>
  <size package="658377" installed="2387107" archive="2446536"/>
  <location href="noarch/webacula-5.5.1-2.2.noarch.rpm"/>
  <format>
    <rpm:license>GPLv3+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Archiving/Backup</rpm:group>
    <rpm:buildhost>old-atreju3</rpm:buildhost>
    <rpm:sourcerpm>webacula-5.5.1-2.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="440" end="39715"/>
    <rpm:provides>
      <rpm:entry name="webacula" flags="EQ" epoch="0" ver="5.5.1" rel="2.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="cron"/>
      <rpm:entry name="apache2" flags="GE" epoch="0" ver="2.2.0"/>
      <rpm:entry name="php5-ZendFramework" flags="GE" epoch="0" ver="1.8.3"/>
      <rpm:entry name="php" flags="GE" epoch="0" ver="5.2.4"/>
      <rpm:entry name="php-pdo"/>
      <rpm:entry name="php-json"/>
      <rpm:entry name="php-pcre"/>
      <rpm:entry name="php-gd"/>
      <rpm:entry name="php-xml"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/php5"/>
    </rpm:requires>
    <file>/etc/apache2/conf.d/webacula.conf</file>
    <file type="dir">/etc/webacula</file>
    <file>/etc/webacula/config.ini</file>
  </format>
</package>
<package type="rpm">
  <name>webacula</name>
  <arch>src</arch>
  <version epoch="0" ver="5.5.1" rel="2.2"/>
  <checksum type="sha" pkgid="YES">8913dae86895399677d324df60222d81ee5421c9</checksum>
  <summary>Web interface of a Bacula backup system</summary>
  <description>Webacula - Web Bacula - web interface of a Bacula backup system.
Supports the run Job, restore all files or selected files,
restore the most recent backup for a client,
restore backup for a client before a specified time,
mount/umount Storages, show scheduled, running and terminated Jobs and more.
Supported languages: English, French, German, Italian,
Portuguese Brazil, Russian.</description>
  <packager></packager>
  <url>http://webacula.sourceforge.net/</url>
  <time file="1625560496" build="1625560490"/>
  <size package="725996" installed="725304" archive="725688"/>
  <location href="src/webacula-5.5.1-2.2.src.rpm"/>
  <format>
    <rpm:license>GPLv3+</rpm:license>
    <rpm:vendor>openSUSE Build Service</rpm:vendor>
    <rpm:group>Productivity/Archiving/Backup</rpm:group>
    <rpm:buildhost>old-atreju3</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="440" end="4758"/>
    <rpm:requires>
      <rpm:entry name="apache2-devel"/>
      <rpm:entry name="libapr-util1-devel"/>
      <rpm:entry name="apache2"/>
    </rpm:requires>
  </format>
</package>
</metadata>